• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.10
• /
• pp.894-900
• /
• 2006

This paper reports the fabrication and characterization of $32{\times}32$ thermal cantilever array for nano-scaled memory device applications. The $32{\times}32$ thermal cantilever array with integrated tip heater has been fabricated with micro-electro-mechanical systems(MEMS) technology on silicon on insulator(SOI) wafer using 9 photo masking steps. All of single-level cantilevers(1,024 bits) have a p-n junction diode in order to eliminate any electrical cross-talk between adjacent cantilevers. Nonlinear electrical characteristic of fabricated thermal cantilever shows its own thermal heating mechanism. In addition, n-channel high-voltage MOSFET device is integrated on a wafer for embedding driver circuitry.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.56-56
• /
• 2008

ZnO Oxide TFT with organic dielectric was prepared. ZnO thin film as active channel was prepared by plasma enhanced atomic deposition technique. Organic dielectric was spin coated on the gate metal. The structure of prepared TFT is bottom gate type and top contact structure. The characterization of oxide TFT was performed. We obtained the mobility of $0.7cm^2$/Vs, the threshold voltage of -14V, and the on-off ratio of $10^4$. We also obtained good output characterization with solid saturation.

• Journal of Mechanical Science and Technology
• /
• v.20 no.3
• /
• pp.297-309
• /
• 2006

This paper deals with a novel structure for single-cell characterization which makes use of bimorph micro thermal actuators combined with electrical sensor device and integrated microfluidic channel. The goal for this device is to capture and characterize individual biocell. Quantitative and qualitative characteristics of bimorph thermal actuator were analyzed with finite element analysis methods. Furthermore, optimization for the dimension of cantilevers and integrated parallel probe systems with microfluidic channels is able to be realized through the virtual simulation for actuation and the practical fabrication of prototype of probes. The experimental value of probe deflection was in accordance with the simulated one.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.2
• /
• pp.524-539
• /
• 2014

To investigate schemes of secret key generation from Ultra-wideband (UWB) channel, we study a statistical characterization of UWB outdoor channel for a campus playground scenario based on extensive measurements. Moreover, an efficient secret key generation mechanism exploiting multipath relative delay is developed, and verification of this algorithm is conducted in UWB Line-of-sight (LOS) outdoor channels. For the first time, we compare key-mismatch probability of UWB indoor and outdoor environments. Simulation results demonstrate that the number of multipath proportionally affects key generation rate and key-mismatch probability. In comparison to the conventional method using received signal strength (RSS) as a common random source, our mechanism achieves better performance in terms of common secret bit generation. Simultaneously, security analysis indicates that the proposed scheme can still guarantee security even in the sparse outdoor physical environment free of many reflectors.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.665-668
• /
• 2004

Oligothiophene derivatives have been well-known as an p-type channel material.$^1$ Here, we report novel oligothiophene derivative containing methylene linkage as an p-type channel material. Oligothiophene derivative containing methylene linkage BHTM was synthesized and characterized. BHTM was prepared by a palladium-catalyzed cross-coupling reaction via zinc-substituted thiophene. BHTM exhibited high thermal stability and at least one transition temperature.

• Journal of Sensor Science and Technology
• /
• v.18 no.1
• /
• pp.42-47
• /
• 2009

In this paper we propose a microfluidic chip that measures the mechanical stiffness of cell membrane using impedance measurement. The microfluidic chip is composed of PDMS channel and a glass substrate with electrode. The proposed device uses patch-clamp technique to capture and deform a target cell and measures impedance of deformed cells. We demonstrated that the impedance increased after the membrane stretched and blocked the channel.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.305-306
• /
• 2008

In this paper, we measured the wireless feedback channel near a highway, and analysis results from the measured sample data are described. For characterizing the channel properties, W-CDMA signal of 2GHz frequency, 5MHz bandwidth and 10ms period are used. The scattering function, delay power profile, delay spread, and Doppler spread are measured.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.10a
• /
• pp.280-283
• /
• 2002

In the manufacturing of large scale composite structures, the cost-effective processing and the enhancement of structural performance are critical. One of the most effective ways for this purpose is to use stitched multiaxial warp knitted (MWK) perform in the resin transfer molding process. This study reports the effect of stitching on the mechanical properties of MWK composites, and the feasibility processing of the thick U-beam structure utilizing the stitched preforms. Permeability of the preform, viscosity and cure property of the epoxy resin have been measured. The results of resin flow analysis has been used in determining the gate/vent locations of the RTM mold. Cross-sectional observation of the channel beam prototype demonstrated that the resin impregnation was almost complete, except for some surrounding area of stitched yarns.

• 한국석유지질학회:학술대회논문집
• /
• autumn
• /
• pp.2-16
• /
• 1999

This study includes structural analysis of the northern Pattani Basin, areal description of depositional facies, and their spatial relationships using 3-D seismic and well data. Well log data indicate that the representative depositional facies of the studied intervals are sandy, fluvial, channel-fill facies encased in shaly floodplain deposits. Seismic responses were predicted from a synthetic seismogram using a model of dominant depositional facies. Peak-to-trough amplitude and instantaneous frequency seismic attributes are used in depositional facies interpretation. Three Intervals A, B and C are interpreted on the successive stratal surfaces. The shallowest interval, A, is the Quaternary transgressive succession. Each stratal surface showed flow pattern variation of fluvial channel facies. Two transgressive cycles were identified in interval A. Interval B also indicated fluvial facies. Depositional facies architectures are described by interpreting seismic attributes on the successive stratal surfaces.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.589-593
• /
• 2003

Narrowband and wideband characterizations of radio propagation channels in tunnel environments are investigated by using ray tracing techniques. For a rectangular straight tunnel and a rectangular curved tunnel, received power is simulated when the receiver moves away from the transmitter. The fast fading statistics of the narrowband propagation are analyzed in terms of cumulative distribution function, level crossing rate and average fade duration. The tunnel wideband radio propagation channel is characterized in terms of mean excess delay and rms delay spread.