• Bulletin of the Korean Chemical Society
• /
• v.24 no.10
• /
• pp.1444-1448
• /
• 2003

The microsurface adsorption - spectral correction (MSASC) technique has been applied to the interaction of indigo carmine (IC) with cetyltrimethylammonium bromide (CTAB). The aggregation of IC on CTAB obeys Langmuir isothermal adsorption. The results show that both the monomer complex $IC{\cdot}CTAB$ and the micellar complex $(IC{\cdot}CTAB)_{78}$ were formed. The binding constant of the monomer complex was calculated to be $K_{IC{\cdot}CTAB}$ = 2.20 ${\times}10^5L{\cdot}mol^{-1}$, and the molar absorptivity of the micellar complex was calculated to be ${\varepsilon}_{(IC{\cdot}CTAB)78}\;^{560nm}$ = 8.58 ${\times}10^5L{\cdot}mol^{-1}{\cdot}cm^{-1}$. The aggregation was applied to the determination of cationic surfactant in wastewater.

• Applied Chemistry for Engineering
• /
• v.5 no.1
• /
• pp.114-120
• /
• 1994

Esterolysis reactions of PNPDPP (p-nitrophenyldiphenylphosphate) by DCI ( dichloroisocyanuric acid sodium salt) in borate buffer pH8.0 micellar phase were studied. The rate of hydrolysis reaction was rapidly increased by adding cationic surfactants, CTAC (cetyltrimethylammonium chloride) or CTAB (cetyltrimethylammonium bromide), to the DCI solution. Especially in CTAB micellar system, the N-Cl bond of DCI was transformed to the N-Br bond during the reaction.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.12
• /
• pp.1877-1880
• /
• 2004

The simple and convenient determination of trace Hg(II) with its 2-mercaptobenzothiazole (MBT) complex in cetyltrimethylammonium bromide (CTAB) media has been studied. The UV-visible spectrum of Hg(II)-MBT complex in CTAB media had a good sensitivity and reproducibility. The Hg(II)-MBT complex in CTAB solution was very stable at pH 10.0 and could be quantitatively complexed if MBT were added to the sample solution more than 10 equivalent of Hg(II). The optimum concentration of CTAB was 0.001%. The calibration curve of Hg(II)-MBT complex with good linearity ($R^2$ = 0.9985) was obtained at the concentration range between $1.0{\times}10^-7$ and $1.0{\times}10^-5$ M in 0.001% CTAB media. The detection limit was $3.1{\times}10^-8$ M (6.2 ng m$L^{-1}$). Hg(II) in the synthetic samples and in the wastewater of the university's wastewater tank and the industrial wastewater tank could also be determined. Based on the experimental results, this proposed technique could be applied to the simple and convenient determination of trace Hg(II) in real samples.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.2
• /
• pp.173-182
• /
• 2018

As part of planning for waste minimization, decontamination foam has been considered as a potential application for the cleaning of radioactive contaminant. In this study, we synthesized silica particles to improve foam stability by varying synthesis parameters. Cetyltrimethylammonium bromide (CTAB) was found to influence the stability of the decontamination foam. The reason was that higher interaction between $SiO_2$ nanoparticles and surfactant at the air-water interface in aqueous solution is beneficial for foam stability. CTAB can also be used as an additive for the aggregation of silica nanoparticles. In the separation of $SiO_2$ nanoparticles, CTAB plays a critical role in the nanoparticles flocculation because of the charge neutralization and hydrophobic effects of its hydrocarbon tails.

• Journal of Electrochemical Science and Technology
• /
• v.10 no.3
• /
• pp.257-270
• /
• 2019

The inhibition performance of sodium gluconate (SG), cetyltrimethylammonium bromide (CTAB) and their mixture (SG/CTAB) on the corrosion behavior of ${\alpha}$-brass in 0.5 M $H_2SO_4$ solution has been investigated by potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), Scanning Electron Microscope with Energy-Dispersive Spectrometer (SEM-EDS), Inductively Coupled Plasma Spectrometry (ICPS) and molecular dynamics (MD) simulation techniques. The results reveal that SG with 5ppm CTAB, noted SG/CTAB, acts as a good corrosion inhibitor and its inhibition efficiency reached 89% after 24 h immersion in sulfuric acid solution, but slightly decreased at higher temperatures. The polarization curves displayed that SG/CTAB acts as a cathodic-kind inhibitor. Electrochemical impedance spectroscopy (EIS) studies revealed that the addition of 5ppm CTAB to different concentrations of SG considerably increases the corrosion resistance of ${\alpha}$-brass. The SEM-EDS and ICPS analyses support the experimental results. Further, molecular dynamics (MD) simulations were used to understand the adsorption profiles of SG/CTAB on Cu(111) and Zn(111) surfaces.

• Journal of the Korean Chemical Society
• /
• v.49 no.2
• /
• pp.145-149
• /
• 2005

• Bulletin of the Korean Chemical Society
• /
• v.26 no.10
• /
• pp.1560-1564
• /
• 2005

The influence of cetyltrimethylammonium bromide (CTAB) on the electrochemical behavior of bisphenol A at the carbon paste electrode (CPE) was investigated. CTAB, with a hydrophobic C-H chain, can adsorb at the CPE surface via hydrophobic interaction and then change the electrode/solution interface, and finally affects the electrochemical response of bisphenol A, confirming from the remarkable oxidation peak current enhancement. The electrode process of bisphenol A was examined, and then all the experimental parameters which affects the electrochemical response of bisphenol A, such as pH value of the supporting electrolyte, accumulation potential and time, potential scan rate and the concentration of CTAB, were examined. Finally, a sensitive and simple voltammetric method was developed for the determination of bisphenol A. Under the optimum conditions, the oxidation peak current of bisphenol A varied linearly with its concentration over the range from $2.5\;{\times}\;10^{-8}\;to\;1\;{\times}\;10^{-6}$ mol/L, and the detection limit was found to be $7.5\;{\times}\;10^{-9}$ mol/L. This method was successfully employed to determine bisphenol A in some waste plastic samples.

• Journal of the Korean Chemical Society
• /
• v.38 no.8
• /
• pp.539-546
• /
• 1994

The critical micelle concentration(CMC) and the counterion binding $constant(\beta)$ at the CMC of cetyltrimethylammonium bromide(CTAB) in a series of aqueous solutions containing medium chain-length n-alcohols(Propanol, Butanol, Pentanol and Hexanol) have been determined from the concentration dependence of electrical conductance at serveral temperature from $17^{\circ}C\;to\;41^{\circ}C.$ Thermodynamic parameters $({\Delta}G^o_m,\;{\Delta}H^o_m,\;{\Delta}S^o_m,\;and\;{\Delta}C_p)$ associated with micelle formation of CTAB have been also estimated from the temperature dependence of CMC and $\beta$ values, and the significance of these parameters and their relation to the theory of micelle formation have been considered. The results show that an enthalpy-entropy compensation effect is usually observed for the micellization of CTAB. The effects of n-alcohols on the micellar properties (CMC and $\beta$) of CTAB solutions have been also investigated. The addition of n-alcohol to the CTAB solution in a small quantity decreases the CMC value and the counterion binding constant $(\beta)$ at the CMC, but the addition of n-alcohol in an excessive quantity increases the CMC values on the conterary. These results have been explained in terms of the effect of the micelle-solubilized alcohol on the micellar surface charge density.

• Korean Journal of Materials Research
• /
• v.16 no.11
• /
• pp.663-667
• /
• 2006

CTAB(cetyltrimethylammonium bromide)-capped CdSe nanoparticles were prepared by using a 4 : 1(v/v) distilled water-isopropyl alcohol mixture. The cadmium chloride and sodium selenosulfate were used as the cadmium and selenium source. By the analysis of XRD and XPS, the resultant particle was confirmed to be cubic CdSe phase. TEM image showed CdSe nanoparticles with empty core. The CTAB-capped sample showed an maximum absorption at 418nm, blue-shifting compared with bulk CdSe, which indicated stronger quantum confinement effect compared with uncapped sample. From FT-IR analysis, it was found that the presence of the new peaks in the $850{\sim}1250cm^{-1}$ range indicated the existence of chemical bonding between CTAB and surface of CdSe nanoparticles. Also TG analysis indicated that there were two weight-loss steps for the CTAB-capped CdSe nanoparticles. It was suggested that CTAB played a significant role in protecting CdSe nanoparticles.

• Analytical Science and Technology
• /
• v.9 no.3
• /
• pp.244-252
• /
• 1996

Spectrophotometric properties of lanthanide complexes with methylthymol blue(MTB) and cetyltrimethylammonium bromide(CTAB) were studied and also lanthanide(III) ions were determined by flow injection analysis on the base of the above results. The absorption maxima of lanthanide(III)-MTB complexes in the presence of CTAB are 635nm with molar absorptivity of $4.51{\sim}6.11{\times}10^4Lmol^{-1}cm^{-l}$ at pH 5.8. The mole ratio of lanthanide(III) complexes with MTB is 1:2 in the presence of CTAB. The calibration curves of lanthanide(III) ions obey the Beer's law in the range of 0.1 to 0.4ppm under the optimum condition. The samples throughput was ca. $60hr^{-1}$. The interfering effect of some cations and anions was investigated. The ligand anions such as tartrate and citrate, many transition and rare earth elements interfered severely and must be removed before the determination of lanthanide(III) ions.