• Journal of Aerospace System Engineering
• /
• v.15 no.3
• /
• pp.20-29
• /
• 2021

As the feasibility of urban air mobility (UAM) service using electric vertical take-off and landing (eVTOL) aircraft increases due to aircraft electrification, distributed propulsion, and artificial intelligence technologies, the U.S. and European aeronautical societies have been improving their certification system and regulations for the type certification of eVTOL. The improved certification system is expected to be ready in the near future, after the European Union Aviation Safety Agency (EASA) proposed the VTOL Special Condition, SC-VTOL in 2019. However, the current domestic certification system is still insufficient to properly respond to eVTOL. This study investigated the development trends of foreign eVTOL and certification systems, identified considerations to improve the domestic certification system, and proposed the measures for type certificates and type certificates validation of eVTOL based on the comparison between SC-VTOL and Korea airworthiness standards (KAS).

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2539-2547
• /
• 2011

This paper will introduce the safety authorization system for light rail transit(LRT) through investigating safety certification & safety authorization in foreign country and aviation field in Korea. The safety authorization system proposed by the government these day was also investigated. Korea Transportation Safety Authority(KOTSA) have conducted safety validation process on Busan-Gimhae LRT before its revenue service during three months since Jan. of 2011. We describe the overview of these validation activities, results and safety certification issued. Learning from this process, we propose the standardized safety validation process including checklists which can be applied to common unmanned light rail system. This study will be a basis of railway safety authorization for LRT and will be continually improve its application ability by the future study.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.3
• /
• pp.49-58
• /
• 2017

The DQMS (Defence Quality Management System) is a certification system that manages participating companies to improve the quality of munitions. Since Korean Defense Specification (KDS) for DQMS certification that was established by adding military requirements based on the ISO quality standard, many companies complain that they should pay too much effort into the preparation process. However, it is hard to find helpful information on the preparation process because we have been only interested in the effect of DQMS acquisition. The purpose of this paper is to provide helpful information to companies preparing for DQMS certification. We surveyed the degree of difficulty and importance of the DQMS requirements from the companies with certification experience, and performed IDA (Importance-Difficulty analysis) by dividing the companies into the main contractor and the subcontractor. The result of IDA shows that there is a different recognition to the DQMS certification between main-contracting and sub-contracting companies. Subcontractor has more difficulties than main contractor in preparing the DQMS certification. In addition, we are able to identify the difficult and important requirements in the preparation process to the DQMS certification. Both main contractor and subcontractor have difficulty to the requirements related to configuration or validation such as 'customer controls configuration', 'configuration review shall be implemented' and 'design and development validation documentation.' The requirements related to customers are important to main contractor but the subcontractor regards difficult requirements as important ones. The result of this paper would be helpful to both the company preparing for DQMS and the munitions quality assurance agency.

• International Journal of Aeronautical and Space Sciences
• /
• v.13 no.4
• /
• pp.435-445
• /
• 2012

In this paper, a design process is established by integrating aviation safety requirements for the development of general aviation aircraft. An Airworthiness-Design Integration System, which integrates certification requirements with the entire design/analysis process, is developed and presented. For the proposed system, KAS 23/FAR 23/AC 23/CS 23 certification regulations are analyzed to determine design constraints and system compliance checks and to construct an ER&G (Engineering Requirement and Guide) and a Design-Certification Related Table (DCRT). Furthermore, through building a DB (Data Base), the management of design and certification related resources for developing a FAR 23 class aircraft are made. Certification tools and resources are also efficiently managed by the DB. The connection between the certification requirements and the detailed design process is proposed in this system. Tracking of this proposed method is validated by configuring a USE CASE and a system. The Airworthiness-Design Integration system will be constructed based on the system's design plan, certification system, and usage scenarios.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.04a
• /
• pp.203-206
• /
• 2005

The objective of study on composite cylinder for alternative fuel vehicle is to develop safe, efficient, and commercially viable, on-board fuel storage system for the fuel cell vehicle or natural gas vehicle that use highly compressed gaseous fuel such as hydrogen or natural gas. This study presents the whole procedure of development and certification of a type 3 composite cylinder of 207bar service pressure and 70 liter water capacity, which includes design/analysis, processing of filament winding, and validation through various testing and evaluation. Design methods of liner configuration and winding patterns are presented. Three dimensional, nonlinear finite element analysis techniques are used to predict burst pressure and failure mode. Design and analysis techniques are verified through burst and cycling tests. The full qualification test methods and results for validation and certification are presented.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1669-1679
• /
• 2010

Related to the on-going "Train Control System Project of Pilot Line Construction for Urban MAGLEV Train", activities by each phase shall be conducted to achieve SIL4 level and obtain safety certification from the Independent Safety Assessment(ISA), based on the IEC standards((IEC 62278/62279 and IEC 62425) for the first time in Korea. This thesis describes the introduction of IEC standards, system assurance activities (such as plan, analysis, test, verification and validation) in compliance with requirements management and project life-cycle and relations with the safety assessment activities; and certification activities (such as document reviews and audits) through system RAMS activities, software quality assurance activities and safety assessment, for the purpose of achieving a successful safety certification at the time of completing the project as system assurance activities including software and safety certification activities in order to acquire the safety certification for train control system which does not exist at all in domestic cases. It is believed that overall system safety assurance activities in this project will contribute to develop more upgraded products of the domestic train control system on the quality and safety point of view, find overseas markets and establish a bridgehead in the future.

• The KIPS Transactions:PartC
• /
• v.13C no.2 s.105
• /
• pp.147-154
• /
• 2006

The certificate status validation mechanism is a critical component of a public key infrastructure based on certificate system. The most generally mechanisms used these days are the use of the certificate revocation list and the real-time certificate status protocol. But the certificate revocation list can not give the real-time certificate status because the certificate is being delivered periodically, and the real-time certificate status protocol method will generate a concentrated load to the server because the protocol in the central server will be accessed whenever a certification is necessary. It will also take a long time to validate the certificate because each trade has to send mass information through the network. This paper will present that real-time validation is guaranteed as the real-time certificate status protocol method and the traffic congestion in the network Is reduced in a way that the certification would be requested using the user information hash value and would be validated using the user information kept in the certification authorities and the service providers. Based on the this study, we suggest a real-time certificate status validation mechanism which can reduce the certificate status validation time using the signed user information hash value. And we confirm speed of certificate status verification faster than existing CRL(Certificate Revocation List) and OCSP(Online Certificate Status Protocol) method by test.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.63 no.4
• /
• pp.226-235
• /
• 2014

Nowadays, railroads are considered the most efficient form of mass transportation. Furthermore, it is necessary that railroads be paired with state-of-the-art safety equipment. Unfortunately, it is impossible to prevent 100% of accidents that may be caused by system or human errors. In order to prevent future accidents, RAMS activity and Functional Safety Certification are required for new systems that are under development. In this paper we evaluate the necessity of the application of RAMS and the performance of RAMS in the system development process. We also explore the Safety Evaluation Procedure required for RAMS certification.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.6
• /
• pp.508-516
• /
• 2017

The M&S (Model and Simulation) has been increasingly used in the wide area of applications and the official certification or accreditation of the M&S are becoming a mandatory requirement to prevent the risks and mishaps caused by the usage of inadequate M&Ss or by misuses of the M&S. This paper threats the VV&A (Verification, Validation, and Accreditation) for the M&S used in the development of the aerospace systems, where most M&S used in the development are derived from the physical laws and the final validation data are typically obtained through a series of flight tests after the prototype production. Considering these unique features, the paper proposes the M&S life-cycle model and development paradigm suitable for the aerospace-system development and accesses the proposed ones by comparative investigation on the relevant regulations and related literatures.

• The Journal of Korean Association of Computer Education
• /
• v.8 no.6
• /
• pp.65-74
• /
• 2005

The metropolitan and province offices of education have been enforcing the ICT application competence certification system for teachers(ACCST). But the system have been enforcing during 3years, the ratio of teachers that has been received certification of the system showed very low, and recently the number of applicant has decreased. The purpose of this study is to examine the problems of the system and to propose a method of improvement of the system. We surveyed literatures offering theoretical and empirical insights connected with this issue and derived suggestions for improvement of the system, and designed questionnaire based on the suggestions. Research data gathered from 547 Korean middle and high school teachers using questionnaire. The improvements on the certification system which can be drawn from this study should consider appropriation of incentive for teachers, introduction of certification method on individual subject, introduction of validation interval of certification, and commissioning in an external agency which has reliable the certification.