• 한국세라믹학회지
• /
• 제41권8호
• /
• pp.628-632
• /
• 2004

생체친화성 인공골 개발을 위하여 해면골과 매우 유사한 기공구조를 갖는 천연 산호(CaCO$_3$, aragonite phase)를 수열처리하여 수산화아파타이트 다공체를 제조하였다. 생체 친화성을 증진시키기 위하여 산호를 수열 처리하는 과정에서 실리콘을 치환시키는 실험을 하였다. 수열합성과 solvothermal 방법을 반복적으로 사용하여 실리콘이 치환된 수산화아파타이트를 합성하였으며 이들의 각 온도에 따른 상변화 및 실리콘 농도를 XRD, ICP, EDS 등을 통하여 분석하였다. 분석결과로부터 실리콘이 수산화아파타이트 골격 내에 균일하게 분산되어 있음을 확인하였다.

• 한국세라믹학회지
• /
• 제40권5호
• /
• pp.434-440
• /
• 2003

초거대 자기 저항 물질인 페로브스카이트 L $a_{0.8}$C $a_{0.2}$Mn $O_3$의 분말을 졸-겔방법으로 제조하였다. Lanthanum(III), Calcium(II) 그리고 Manganese(III) 2,4-Pentanedionate를 Propionic acid와 methane떠 혼합용매를 사용하고 PEG (l5 wt%) 용액을 첨가 하여 안정한 졸용액을 합성하였고 FT-IR spectroscopy로 반응의 진행 정도를 관찰하였다. L $a_{0.8}$C $a_{0.2}$Mn $O_3$ 겔 분말에 대해 온도를 변화시키면서 열처리하여 FT-IR, CP/MAS $^{13}$C solid state NMR spectroscopy와 XRD등을 이용해 구조변화를 관찰하였다. 열분석은 TG/DTA로 측정하였으며, FE-SEM을 통해 입자크기와 균일도를 관찰하였고, 양이온 조성 비율을 알아보기 위해 ICP-AES를 측정하였다. 자성 특성을 규명하기 위해 VSM을 이용하여 자기 모멘트를 측정하였으며, 상자기성 에서 강자기성으로 전이되는 큐리온도( $T_{c}$)를 관찰하였다.

• 한국세라믹학회지
• /
• 제45권8호
• /
• pp.472-476
• /
• 2008

The surface region of commercial stainless steel 304 and 316 plates has been modified through deposition of the multi-layered coatings composed of titanium film ($0.1{\mu}m$) and gold film ($1-2{\mu}m$) by an electron beam evaporation method. XRD patterns of the stainless steel plates deposited with conductive metal films showed the peaks of the external gold film and the stainless steel substrate. Surface microstructural morphologies of the stainless steel bipolar plates modified with multi-layered coatings were observed by AFM and FE-SEM images. The stainless steel plates modified with $0.1{\mu}m$ titanium film and $1{\mu}m$ gold film showed microstructure of grains of under 100 nm diameter. The external surface of the stainless steel plates deposited with $0.1{\mu}m$ titanium film and $2{\mu}m$ gold film represented somewhat grain growth of Au grains in FE-SEM image. The electrical resistance and water contact angle of the stainless steel bipolar plates modified with multi-layered coatings were examined with the thickness of the gold film.

• 한국세라믹학회지
• /
• 제50권2호
• /
• pp.157-162
• /
• 2013

The need for lead-free piezoceramics has caused a renewal of interest in $BaTiO_3$-based systems. Recently, it was found that ceramics in the $(Ba,Ca)(Zr,Ti)O_3$ system have properties comparable to those of $Pb(Zr,Ti)O_3$. However, these ceramics require rather high sintering temperatures of $1450-1550^{\circ}C$. In this work, the effect of $TiO_2$ and CuO addition on the sintering behavior, microstructure, dielectric and piezoelectric properties of $(Ba_{0.85}Ca_{0.15})(Zr_{0.1}Ti_{0.9})O_3$ (BCTZ) ceramics will be discussed. BCTZ ceramics were prepared by the mixed oxide route and 1 mol % of $TiO_2$ or CuO was added. Undoped and doped ceramics were sintered at $1350^{\circ}C$ for 1-5 h. CuO was found to be a very effective sintering aid, with samples sintered for 1 h at $1350^{\circ}C$ having a bulk density of 95% theoretical density; however the piezoelectric properties were greatly reduced, probably due to the small grain size.

• Composites Research
• /
• 제33권5호
• /
• pp.251-255
• /
• 2020

본 연구에서는 용융가압함침공정을 이용하여 제조된 TiC 세라믹 입자강화 철강복합재를 제조하고 상용구상흑연주철과 비교를 위하여 미세조직 분석 및 경도 등 기초물성과 선박 해양 분야등의 적용가능성 검토를 위하여 염수환경에서의 부식 특성에 관한 연구를 진행하였다. 염수환경에서의 부식특성 비교 결과 구상흑연주철 대비 부식전위와 부식전류밀도 모두 낮은 값을 나타내었고, 낮은 연간부식률을 통하여 TiC-Fe 금속복합재의 내식성이 더 뛰어난 것을 확인하였다.

• 한국세라믹학회지
• /
• 제48권4호
• /
• pp.323-327
• /
• 2011

The effects of $Dy_2O_3$ and $Er_2O_3$ co-doping on electrical properties and temperature stability of barium titanate ($BaTiO_3$) ceramics were investigated in terms of microstructure and structural analysis. The dielectric constant and the insulation resistance (IR) of 0.7 mol% $Dy_2O_3$ and 0.3 mol% $Er_2O_3$ co-doped dielectrics had about 60% and 20% higher than the values of undoped one, respectively, and the temperature coefficient of capacitance (TCC) met the X7R specification. The addition of $Dy_2O_3$ contributed to electrical properties caused by increase of tetragonality; however, preferential diffusion of $Dy^{3+}$ ions toward A site in $BaTiO_3$ grain exhibited an adverse effect on temperature stability by grain growth. On the other hand, The $Er_2O_3$ addition in $BaTiO_3$ could affect the TCC behavior and the IR with suppression of grain growth caused by reinforcement of grain boundary and electrical compensation. Therefore, the enhanced electrical properties and temperature stability through the co-doping could be deduced from the increase of tetragonality and the suppression of grain growth.

• 한국세라믹학회지
• /
• 제41권10호
• /
• pp.766-770
• /
• 2004

구형 실리카 나노 콜로이드 입자를 이용하여 반사방지막을 제조하였다. 실리카 콜로이드 현탁액을 모세관 힘을 이용하여 기울어진 두 장의 유리판 사이에 저장한 후 위의 유리를 이동시켜 반사 방지막을 코팅하였다. 상판 유리의 이동속도가 빨라질수록 막의 두께는 감소하였고, 막의 두께 변화에 따라 광 투과율이 변하였다. SEM으로 관찰된 실리카 나노 입자는 최밀충진에 가깝게 유리 기판에 부착되어 있었으며, 이로부터 고체 입자와 기공을 포함하는 막의 유효 굴절율을 구하였다. 최대의 광투과율을 나타내는 파장과 유효 굴절율로 부터 계산한 막의 두께는 SEM 사진 및 profiler로 구한 값과 잘 일치하였다. $94.7\%$의 최대 광투과율을 얻었으며, 양면으로 코팅한다면 $97.4\%$의 투과율 즉 $1.3\%$의 반사율을 얻을 수 있는 것으로 나타났다.

• 한국전기전자재료학회논문지
• /
• 제23권10호
• /
• pp.771-775
• /
• 2010

In this study, piezoelectric and dielectric properties of the $(Na_{0.5}K_{0.5})NbO_3-(1-x)(Bi_{0.5}Na_{0.5})TiO_3-xBaTiO_3$ [NKN-(1-x)BNT-xBT] ceramics were investigated. The lead-free NKN-(1-x)BNT-xBT ceramics were fabricated by a conventional mixed oxide method. The results indicate that the addition of $BaTiO_3$ significantly influences the sintering, microstructure, phase transition and electrical properties of NKN-BNT ceramics. A gradual change in the piezoelectric and dielectric properties was observed with the increase of BT contents. The dielectric constant, piezoelectric constant ($d_{33}$) and electromechanical coupling factor ($k_p$) increased at the morphotropic phase boundary (MPB). The $d_{33}$=184 pC/N, $k_p$=0.38, dielectric constant=1455 with dielectric loss value of less than 1% were obtained for the NKN-0.95BNT-0.05BT ceramics sintered at $1150^{\circ}C$ for 2h. These results demonstrate that the NKN-(1-x)BNT-xBT ceramics is an attractive candidate for lead-free piezoelectric materials.

• 한국전기전자재료학회논문지
• /
• 제21권12호
• /
• pp.1077-1082
• /
• 2008

To fabricate a multi-layered piezoelectrics/electrodes structure, the piezoelectrics should be sintered at the temperature lower than $950^{\circ}C$ to use the silver electrode, which is cheaper than the electrodes containing noble metals such as Pd and Pt. Therefore, in this study, we modified the composition of $Pb(Zr,Ti)O_3$-based material as $(Pb_{0.98}Cd_{0.02})(Ni_{1/3}Nb_{2/3})_{0.25}Zr_{0.35}Ti_{0.4}O_3$ to lower the sintering temperature and to improve the piezoelectric properties. Small amount of $MnCO_3$, $SiO_2$, and $Pb_3O_4$ were also added to lower the sintering temperature of the ceramic. The prepared raw powders were mixed by using a ball mill for 24 hours. And then the mixed powders were calcinated for 2 hours at $800^{\circ}C$. The calcinated powders were again crushed with the ball mill for 72 hours. The final powders were pressed for making the shape of ${\emptyset}15\;mm$ disk. The disk-type samples were sintered at temperature range of $850{\sim}950^{\circ}C$. The crystal phases of the sintered specimens were perovskite structure without secondary phases. All of the measured electrical properties such as electromechanical coupling coefficients ($k_p$), mechanical quality factors ($Q_m$), and piezoelectric charge constants ($d_{33}$) were decreased with decreasing the sintering temperatures. The electrical properties measured at the sample sintered at $950^{\circ}C$ were 54% of $k_p$, 503 of $Q_m$, and 390 pC/N of $d_{33}$, respectively. These properties were considered to be fairly good for the application of multi-layered piezoelectric generators or actuators.

• 한국분말재료학회지
• /
• 제27권2호
• /
• pp.126-131
• /
• 2020

The grain growth behavior of M-type Sr hexaferrite (SrM) grains is investigated with the addition of MnCO₃. First, the SrM powder is synthesized by a conventional solid-state reaction. The powder compacts of SrM are sintered at 1250℃ for 2 h with various amounts of MnCO₃ (0, 0.5, 1.0, and 4.0 mol%). There is no secondary solid phase in any of the sintered samples. Relative density increases when MnCO₃ is added to the SrM. Obvious abnormal grain growth does not appear in any of the SrM samples with MnCO₃. The average grain size increases when 0.5 mol% MnCO₃ is added to the SrM. However, as the amount of MnCO₃ increase to over 0.5 mol%, the average grain size decreases. These observations allow us to conclude that the growth of SrM grains is governed by the two-dimensional nucleation grain growth mechanism, and the critical driving force for the growth of a grain decreases as the amount of MnCO₃ increases.