Browse > Article
http://dx.doi.org/10.7234/composres.2020.33.5.251

Corrosion Behaviors of TiC Ceramic Particulate Reinforced Steel Composites Fabricated by Liquid Pressing Infiltration Process in Salt Water Environment  

Lee, Yeong-Hwan (Composite Research Division, Korea Institute of Materials Science)
Ko, Seongmin (Composite Research Division, Korea Institute of Materials Science)
Shin, Sangmin (Composite Research Division, Korea Institute of Materials Science)
Cho, Seungchan (Composite Research Division, Korea Institute of Materials Science)
Kim, Yangdo (School of Materials and Science Engineering, Pusan National University)
Kim, Junghwan (Composite Research Division, Korea Institute of Materials Science)
Lee, Sang-Kwan (Composite Research Division, Korea Institute of Materials Science)
Lee, Sang-Bok (Composite Research Division, Korea Institute of Materials Science)
Publication Information
Composites Research / v.33, no.5, 2020 , pp. 251-255 More about this Journal
Abstract
In this study, TiC ceramic particulate reinforced steel composites was fabricated using a liquid pressing infiltration process. Studies were conducted on microstructure analysis and basic physical properties such as hardness and corrosion characteristics in salt water environment for comparison with commercial nodular cast iron. As a result of comparison of corrosion characteristics in a salt water environment, both corrosion potential and corrosion current density were lower than that of ductile graphite cast iron. The lower calculated corrosion rate confirms that the TiC-Fe metal composite has superior corrosion resistance than the cast iron.
Keywords
Metal matrix composites; Liquid pressing infiltration; Titanium carbide; Potentiodynamic polarization;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Cho, S., Jo, I., Lee, S.-K., and Lee, S.-B., "Microstructure and Wear Characteristics of TiC-SKD11 Composite Fabricated by Liquid Pressing Infiltration Process", Composites Research, Vol. 30, No. 3, 2017, pp. 209-214.   DOI
2 Jam, A., Nikzad, L., and Razavi, M., "TiC-based Cermet Prepared by High-energy Ball-milling and Reactive Spark Plasma Sintering", Ceramics International, Vol. 43, No. 2, 2017, pp. 2448-2455.   DOI
3 Lee, Y.-H., Huynh, X.-K., and Kim, J.S., "Spark Plasma Sintering of Fe-TiC Composite Powders", Journal of Korean Powder Metallurgy Institute, Vol. 21, No. 5, 2014, pp. 382-388.   DOI
4 Wang, Z., Lin, T., He, X., Shao, H., Zheng, J., and Qu, X., "Microstructure and Properties of TiC-high Manganese Steel Cermet Prepared by Different Sintering Processes", Journal of Alloys and Compounds, Vol. 650, No. 25, 2015, pp. 918-924.   DOI
5 Kim, Y.-I., An, G.S., Lee, W., Jang, J.M., Park, B.-G., Jung, Y.-G., Choi, S.-C., and Ko, S.-H., "In-situ fabrication of TiC-Fe3Al Cermet", Ceramics International, Vol. 43, No. 8, 2017, pp. 5907-5913.   DOI
6 Wang, Z., Lin, T., He, X., Shao, H., Zheng, J., and Qu, X., "Microstructure and Properties of TiC-high Manganese Steel Cermet Prepared by Different Sintering Processes", Journal of Alloys and Compounds, Vol. 650, No. 25, 2015, pp. 918-924.   DOI
7 Lee, Y.-H., Ko, S., Park, H., Lee, D., Shin, S., Jo, I., Lee, S.-B., Lee, S.-K., Kim, Y., and Cho, S., "Effect of TiC Particle Size on High Temperature Oxidation Behavior of TiC Reinforced Stainless Steel", Applied Surface Science, Vol. 480, 2019, pp. 951-955.   DOI
8 Cho, S., Jo, I., Lee, Y.-H., Yoo, Y.W., Byon, E., Lee, S.-K., and Lee, S.-B., "Highly Improved Oxidation Resistance of TiCSKD11 Composite by SiC/$TiB_2$ Based Hybrid Coating", Applied Surface Science, Vol. 448, 2018, pp. 407-415.   DOI
9 Jones, D.A., Principles and Prevention of Corrosion, pp. 75-77, PrenticeHall, 1996.
10 Qi, Q., Liu, Y., and Huang, Z., "Promising Metal Matrix Composites (TiC/Ni-Cr) for Intermediate-temperature Solid Oxide Fuel Cell (SOFC) Interconnect Applications", Scripta Materialia, Vol. 109, 2015, pp. 56-60.   DOI
11 Oh, N.R., Lee, S.K., Hwang, K.C., and Hong, H.U., "Characterization of Microstructure and Tensile Fracture Behavior in a Novel Infiltrated TiC-steel Composite," Scripta Materialia, Vol. 112, 2016, pp. 123-127.   DOI
12 Oh, N.-R., Lee, S.-K., Cho S.-C., Jo, I.-G., Hwang, K.-C., Kim, D.-H., Cho, Y.-T., Sur, D.-W., and Hong, H.U., "Temperature Dependency of the Tensile Characteristics and Transition of Fracture Behaviors in a Novel Infiltrated TiC-SKD11 Composites", Korean Journal of Metals and Materials, Vol. 55, No. 3, 2017, pp. 156-164.   DOI
13 Cho, S., Jo, I., Kim, H., Kwon, H.-T., Lee, S.-K., and Lee, S.-B., "Effect of TiC Addition on Surface Oxidation Behavior of SKD11 Tool Steel Composites", Applied Surface Science, Vol. 415, 2017, pp. 155-160.   DOI