• 한국세라믹학회지
• /
• 제36권11호
• /
• pp.1150-1155
• /
• 1999

• 한국세라믹학회지
• /
• 제22권1호
• /
• pp.19-24
• /
• 1985

The synthetic method was studied on the $SrTiO_3$ powder of pure and homogeneous ultra fine particle of $SrTiO_3$. Pure and ultra fine particle was synthesized from $Sr(OH)_2$.$8H_2O$ and Ti(OH) at 3$0^{\circ}C$~9$0^{\circ}C$ in the $N_2$ gas atmosphere.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.42-43
• /
• 2008

The numerous application of ceramic superconducting bulk such as magnetic levitation train flywheel energy, levitation transpormation, magnetic bulk magnet etc. To obtain YBaCuO materials in the form of large single crystals are necessary. A refreshment and uniform distributon of the superconducting particle in the sample. The enhancement of the critical density was ascribe to a fine dispersion of the superconducting particle.

• 한국세라믹학회지
• /
• 제15권4호
• /
• pp.193-198
• /
• 1978

Test-bricks were prepared from an artifically graded Ham Kang sand and a commercial CaO and autoclaved for 6 hours at $16 kg/cm^2$ pressure $(203^{\circ}C)$. Bricks were tested for compressive strength, free lime, saluble silica and amount of water absorption. Physical properties of bricks were very much depended on the size distribution of sand particle and the amount of soluble silica in bricks.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1994년도 특별강연 및 추계학술발표 개요집
• /
• pp.189-190
• /
• 1994

• 한국세라믹학회지
• /
• 제50권6호
• /
• pp.410-415
• /
• 2013

$ZrB_2$-SiC ceramics are fabricated via hot pressing with different ratios of submicron or nano-sized SiC in a $ZrB_2$-20 vol%SiC system, in order to examine the effect of the SiC size ratio on the microstructures and physical properties, such as thermal conductivity, hardness, and flexural strength, of $ZrB_2$-SiC ceramics. Five different $ZrB_2$-SiC ceramics ($ZrB_2$-20 vol%[(1-x)SiC + xnanoSiC] where x = 0.0, 0.2, 0.5, 0.8, 1.0) are prepared in this study. The mean SiC particle sizes in the sintered bodies are highly dependent on the ratio of nano-sized SiC. The thermal conductivities of the $ZrB_2$-SiC ceramics increase with the ratio of nano-sized SiC, which is consistent with the percolation behavior. In addition, the $ZrB_2$-SiC ceramics with smaller mean SiC particle sizes exhibit enhanced mechanical properties, such as hardness and flexural strength, which can be explained using the Hall-Petch relation.

• 한국세라믹학회지
• /
• 제46권3호
• /
• pp.249-252
• /
• 2009

Nanocrystalline ceria particles were prepared by using the ultrasonic spray pyrolysis method. The prepared ceria particles were found to be spherical and non-agglomerated by the SEM and TEM analyses. It was found that carrier gas influences the size and morphology. It was found that the air stream of carrier gas results in porous agglomerated structure of ceria abrasives, whereas solid nano-sphere can be obtained in a more oxidizing atmosphere.

• 한국세라믹학회지
• /
• 제21권4호
• /
• pp.366-372
• /
• 1984

Unstabilized Zirconia was added to basic composition under 44$mu extrm{m}$ of 57.80wt% Clay-22.20wt% Chamotte-20.00wt% Agalmatolite system. Here the amount and the particle size of Zirconia were 5-25wt% and -20${\mu}{\textrm}{m}$ respectively and the body of these composition was first at 135$0^{\circ}C$. The results obtained from examining the properties of sintered body were as follows. 1. Firing linear shrinkage apparent density and bulk density apparent porosity and water absorption of the samples had the tend to increase according as the particle size of zirconia became larger and the amount of zirconia increased. 2. Modulus of rupture was inversely proportional to the particle size and the additive amount of zirconia, . Especially in case that the particle size of zirconia over 5${\mu}{\textrm}{m}$ and the additive amount of zirconia was 25wt% the modulus of rupture had shrunk drastically. 3. The maximum value of KIC was obtained at 20wt% additive amount of zirconia according to the each particle size of zirconia. Especially the highest value of KIC is 2, 173 M. Pa. M1/2 when the particle size of zirconia is 5~10${\mu}{\textrm}{m}$ and the additive amount is 20wt%.

• 한국세라믹학회지
• /
• 제39권10호
• /
• pp.1007-1010
• /
• 2002

마이크로파 가열을 이용하여 ${\gamma}-Al_2O_3와\;Na_2SO_4$ 분말 혼합물로부터 알파 알루미나 판상체 입자를 합성하였다. 마이크로파를 이용하여 합성된 알루미나 입자의 크기와 입자분포를 마이크로파 이용 없이 동일한 혼합물로부터 합성된 분말과 비교하였다. 마이크로파를 이용하여 합성된 시료는 마이크로파 사용 없이 합성된 시료에 비하여 입자크기가 작고 입자분포가 좁음을 알 수 있었다.

• 한국세라믹학회지
• /
• 제31권10호
• /
• pp.1159-1168
• /
• 1994

We powders were synthesized from W powders in differnet particle sizes by Self-propagating High-temperature Synthesis process (SHS) using a chemical furnace. The effects of the mole ratio of chemical fuel content, pellet thickness and the mole ratio between carbon and tungsten (C/W Ratio) on synthesis were investigated with the tungsten powders have different particle size each other. Compositional and structural characterization of these powders was carried out by scanning electron microscope (SEM0 and x-ray diffractometer. Powder characterization was carried out by the measurement of particle size distribution with laser-particle size analyzer. The amounts of WC obtained by SHS process depend very much on the particle size of tungsten powder and heat contents given in a product, i.e. as the particle size of W powder is smaller, the amounts of WC produced increase. Also the more heat contents is given, the more amounts of WC increase. By optimizing the synthesis conditions, it is possible to fabricate WC powders which have little secondary phases (W2C, C).