• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.179-182
• /
• 2010

본 연구에서는 MLS 차분법을 이용하여 동역학 문제를 해석하기 위한 explicit 동적해석 알고리즘을 제시한다. 격자망이 없는 장점을 부각시키기 위해 이동최소제곱법에 근거한 Taylor 전개로부터 미분근사를 얻고 차분식을 구성했다. 지배 미분방정식의 시간항을 CDM(Central difference Method) 차분하여 빠른 속도로 동적해석을 수행하였다. 수치결과를 통해 본 연구에서 제시한 알고리즘의 정확성과 안정성을 확인할 수 있었다.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.410-413
• /
• 2007

Water vapor in the atmosphere is an influential factor of the hydrosphere cycle, which exchanges heat through phase change and is essential to precipitation. Because of its significance in altering weather, the estimation of water vapor amount and distribution is crucial to determine the precision of the weather forecasting and the understanding of regional/local climate. It is shown that it is reliable to measure precipitable water (PW) using long baseline (500-2000km) GPS observations. However, it becomes infeasible to derive absolute PW from GPS observations in Taiwan due to geometric limitation of relatively short-baseline network. In this study, a method of deriving Near-Real-Time PW from short baseline GPS observations is proposed. This method uses a reference station to derive a regression model for wet delay, and to interpolate the difference of wet delay among stations. Then, the precipitable water is obtained by using a conversion factor derived from radiosondes. The method has been tested by using the reference station located on Mt. Ho-Hwan with eleven stations around Taiwan. The result indicates that short baseline GPS observations can be used to precisely estimate the precipitable water in near-real-time.

• The Journal of Korean Academy of Prosthodontics
• /
• v.24 no.1
• /
• pp.55-65
• /
• 1986

An in vitro study was performed to evaluate adaptation of custom direct, custom indirect, and prefabricated post system on 15 extracted upper central incisors. 15 specimens were prepared and equally devided into 3 groups under random sampling. Each group of 5 cast posts was made with custom direct, custom indirect, and prefabricated post core method. Gap between inner wall of the dentin and outer wall of the cast post was measured on electron microphotographic prints at x500 magnification. The result were as follows ; 1. No significant difference of adaptation at cervical portion was found between each method. 2. Prefabricated post core method had poor adaptation compared with other methods. 3. Even distribution of adaptation was found in custom direct method between each portion. 4. Prefabricated post core method showed remarkable difference in adaptation between each portion.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2010.05a
• /
• pp.37-39
• /
• 2010

In this study, with new office construction site of S Construction company as subject, to solve all the problems according to reduced hydration heat and temperature crack of mass concrete used mat foundation and placing time difference, low heat combination of coarse particle cement and fly-ash and setting time difference applied AE water reducing agent, and to prevent the early frost damage caused by low outdoor temperature, a heat insulation method using double bubble sheet was conducted. As a result, it was found that hydration heat and setting time difference was reduced by applying a low heat combination and setting time difference construction method, and that the high insulation capability of the double bubble sheet was able to not only prevent the early frost damage but also reduce temperature difference between the central part and the upper part of mass concrete.

• Bulletin of the Korean Mathematical Society
• /
• v.47 no.1
• /
• pp.39-51
• /
• 2010

In this paper we consider the uniform central limit theorem for a martingale-difference array of a function-indexed stochastic process under the uniformly integrable entropy condition. We prove a maximal inequality for martingale-difference arrays of process indexed by a class of measurable functions by a method as Ziegler [19] did for triangular arrays of row wise independent process. The main tools are the Freedman inequality for the martingale-difference and a sub-Gaussian inequality based on the restricted chaining. The results of present paper generalizes those of Ziegler [19] and other results of independent problems. The results also generalizes those of Bae and Choi [3] to martingale-difference array of a function-indexed stochastic process. Finally, an application to classes of functions changing with n is given.

• Korean Journal of Applied Biomechanics
• /
• v.24 no.4
• /
• pp.455-461
• /
• 2014

The purposes of this study were to reveal the kinematic and kinetic difference of hard ground soccer shoe, firm ground soccer shoe and soft ground soccer shoe. Soccer players were shoes of varying stud designs with some preferring the bladed studs while others opting for the conventional studded stud. Statistics were used one way-ANOVA and Tukey's Honestly Significant Difference Method. Seven healthy college soccer players were attended a test. All parameters were recorded using the Zebris system. Spatio-temporal variables were no significant difference. Lateral symmetry was statistically significant differences (p<.05). Vertical GRF parameters were no significant difference. Medial midfoot pressure, lateral midfoot pressure and central forefoot pressure were statistically significant differences (p<.05). This study demonstrates that playing surface significantly affects difference soccer shoes during soccer game. Furthermore, epidemiological investigation is warranted to determine the effects of playing surfaces on sport specific injury mechanisms.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.1
• /
• pp.355-358
• /
• 2013

XRCC1 genetic polymorphisms could be associated with increased risk of various cancer, including hepatocellular carcinoma (HCC), the fifth most common cancer. We here conducted a study to explore the role of selective SNPs of the XRCC1 and XPD genes in the prognosis of HCC. A total of 231 cases were collected, and genotyping of XRCC1 Arg194Trp, XRCC1 Arg399Gln, XPD Lys751Gln and XPD Asp312Asn was performed by duplex polymerase-chain-reaction with the confronting-two-pair primer method. Our findings indicated XRCC1 399Gln/Gln genotype was associated with a significant difference in the median survival time compared with patients carrying Arg/Trp and Arg/Arg genotypes, and individuals with XPD 751 Gln/ Gln genotype had a significantly greater survival time than patients carrying Lys/Lys and Lys/Gln genotypes. The Cox's regression analysis showed individuals carrying XRCC1 399Trp/Trp genotype had 0.55 fold risk of death from HCC than Arg/Arg genotype. Similarly, XPD 751Gln/Gln had a strong decreasein comparison to XPD Lys/Lys carriers with an HR of 0.34. These results suggest that polymorphisms in XRCC1 and XPD may have functional significance in the prognosis of HCC.

• Journal of Ocean Engineering and Technology
• /
• v.18 no.2
• /
• pp.10-17
• /
• 2004

In this research, a numerical simulation for the acoustic sounds around a two-dimensional circular cylinder in a uniform flaw was developed, using the finite difference lattice Boltzmann model. We examine the boundary condition, which is determined by the distribution function concerning density, velocity, and internal energy at the boundary node. Pressure variation, due to the emission of the acoustic waves, is very small, but we can detect this periodic variation in the region far from the cylinder. Daple-like emission of acoustic waves is seen, and these waves travel with the speed of sound, and are synchronized with the frequency of the lift on the cylinder, due to the Karman vortex street. It is also apparent that the size of the sound pressure is proportional to the central distance to the circular cylinder. The lattice BGK model for compressible fluids is shown to be a powerful tool for the simulation of gas flaws.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.147-148
• /
• 2023

Recently, as blast furnace slag concrete has become widely used, managing the strength of concrete has become important. mSn is a method of correcting the difference in strength between standard cured specimens and concrete exposed to changes in temperature. In this study, the predicted strength based on the maturity of the central and outer parts of the blast furnace slag concrete structure is compared with the actual strength measured through coring. As a result, the actual strength difference between the center and the outer part of the concrete mixed with blast furnace slag was larger than the predicted strength difference.

• Journal of Advanced Marine Engineering and Technology
• /
• v.13 no.3
• /
• pp.37-47
• /
• 1989

A calcuation method of the temperature distribution for various shape due to the constant heat input is studied in this paper. So far, the method of try and error is carring out on the mould design. The reason of adopting this method is due to hardly estimate the cooling system in the mould base. As above description, the most part of the mould is supposed as a rectangular, cylinderical and triangular shape and made a governing equation of heat transfer and solved it to numerical analysis by finite-difference method(central- difference). After that in order to confirm that the temperatures are measured on different shape specimens from the part of frequent usage of which are carbon, crome-molybden, tool and stainless steel those were compared with the results of calculations presented in this paper.