• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1066-1071
• /
• 2005

This paper presents the two lossless auxiliary inductors-assisted voltage source type half bridge (single ended push pull: SEPP) series resonant high frequency inverter for induction heated fixing roller in copy and printing machines. The simple high-frequency inverter treated here can completely achieve stable zero current soft switching (ZCS) commutation for wide its output power regulation ranges and load variations under its constant high frequency pulse density modulation (PDM) scheme. Its transient and steady state operating principle is originally described and discussed for a constant high-frequency PDM control strategy under a stable ZCS operation commutation, together with its output effective power regulation characteristics-based on the high frequency PDM strategy. The experimental operating performances of this voltage source SEPP ZCS-PDM series resonant high frequency inverter using IGBTs are illustrated as compared with computer simulation results and experimental ones. Its power losses analysis and actual efficiency are evaluated and discussed on the basis of simulation and experimental results. The feasible effectiveness of this high frequency inverter appliance implemented here is proved from the practical point of view.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.11a
• /
• pp.415-420
• /
• 2005

This paper presents the two lossless auxiliary inductors-assisted voltage source type half bridge (single ended push pull: SEPP) series resonant high frequency inverter for induction heated king roller in copy and printing machines. The simple high-frequency inverter treated here can completely achieve stable zero current soft switching (ZCS) commutation for wide its output power regulation ranges and load variations under its constant high frequency pulse density modulation (PDM) scheme. Its transient and steady state operating principle is originally described and discussed for a constant high-frequency PDM control strategy under a stable ZCS operation commutation, together with its output effective power regulation characteristics-based on the high frequency PDM strategy. The experimental operating performances of this voltage source SEPP ZCS-PDM series resonant high frequency inverter using IGBTs are illustrated as compared with computer simulation results and experimental ones. Its power losses analysis and actual efficiency are evaluated and discussed on the basis of simulation and experimental results. The feasible effectiveness of this high frequency inverter appliance implemented here is proved from the practical point of view.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.10a
• /
• pp.63-64
• /
• 2006

• BMB Reports
• /
• v.36 no.2
• /
• pp.237-242
• /
• 2003

Hepatic lipase is a key enzyme that is involved in HDL-C metabolism. The goal of this study was to find out the frequency of the hepatic lipase C514T polymorphism, and evaluate its relationship with plasma HDL-C levels and coronary artery disease (CAD) in Koreans. Two hundred and twenty four subjects with no previous history of lipid-lowering therapy, 118 patients with significant CAD, and 106 controls were examined with respect to their genotypes, lipid profiles, and other risk factors for CAD. The frequency of the -514T allele was 0.37 in men and 0.35 in women, which were higher than the frequency that was reported in Caucasians, but lower than the frequency that was reported in African-Americans. The -514T allele was associated with significantly higher HDL-C levels in women. After controlling for age, gender, BMI, DM, and smoking, the non-CC genotype was significantly associated with HDL-C levels, and explained 6% of the HDL-C variation in this study. When the genotypes-distribution was compared between the CAD and non-CAD patients, the hepatic lipase C-514T polymorphism was not associated with the presence of CAD. Koreans have a higher frequency of the hepatic lipase gene 514T allele than Caucasians, and the -514T allele is associated with higher plasma HDL-C levels in Korean women, and perhaps non-smoking men. However, our data does not suggest an association between the polymorphism and an increased risk of CAD.

• Journal of Sasang Constitutional Medicine
• /
• v.28 no.1
• /
• pp.57-66
• /
• 2016

Objectives The purpose of this study is to report on the collecting status of the prospective clinical data, that is designed to find clinical factors for determining the constitutional prescription.Methods We collected the prospective clinical data of 1208 subjects in the 10 oriental hospitals and 2 oriental clinic, from September 2012 to July 2015. Subjects were diagnosed and prescribed by the Sasang Constitution specialist. We counted the usage frequency of each constitutional herbal formula. Besides we check the main chief complaints on each constitutional herbal formula.Results & Conclusions In TE type, Yeoldahanso-tang, Cheongsimnyeonja-tang were used in high frequency. In SE type, Palmulgunja-tang, Gwakhyangjunggi-san were used in high frequency. In SY type, Hyeongbangjihwang-tang, Yanggyeoksanhwa-tang were used in high frequency. The both of high frequency-prescriptions in TE types were for the Interiorheat disease, expecially liver-heat lung-dry symptomatology. The main chief complaint of high frequency-prescriptions was fatigue in every constitution. We hope that the process of constitutional prescription would be standardized through the subsequent researches.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.6
• /
• pp.533-539
• /
• 2008

An high frequency induction hardening technology of vehicle body press-formed of thin sheet steel has been developed to increase the strength of vehicle body parts locally by high frequency induction heating, thereby eliminating the need for reinforcements. And this technique for increasing the tensile strength of sheet steel was practically applied to the front floor cross member and center pillar reinforcement of a passenger car. The side impact behavior has been investigated when induction hardening technology is applied to the conventional low-carbon steel and weight reduction of an automotive body is expected. In this paper, basic experiments were performed for the hat-shaped specimen under high frequency induction heating process. Martensitic transformation was found in the heating zone through microscopic observation which showed higher hardness. In addition, the hardness and strength of the center-pillar specimen made of boron steel increased remarkably by high frequency induction heating.

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.134-139
• /
• 2005

This paper presents a cost effective quasi-resonant soft-switching PWM high frequency inverter with minimum circuit components. This inverter can achieve wider soft commutation, simpler power circuit configuration, smaller volumetric size, lower cost and wider power regulation range, higher-efficiency as compared with single ended quasi-resonant ZVS-PFM inverter and active voltage clamped quasi-resonant ZVS-PWM inverter. The operation principle of the proposed inverter is described on the basis of the simulation and experimental results, together with its operating performances in steady state. The operating performances of this unique proposed high frequency inverter based on ZVS and ZCS arms-related soft commutation principle is evaluated and discussed as compared with the active voltage-clamped ZVS-PWM inverter and a conventional single-ended ZVS-PFM inverter. The practical effectiveness of a novel type quasi-resonant soft-switching PWM high frequency inverter using IGBT is actually proved for consumer induction heated appliances as rice cooker, hot water producer, steamer and super heated steamer. The extended bidirectional circuit topology of quasi-resonant PWM high frequency inverter with minimum circuit components is demonstrated, which operate as the direct frequency changer.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1108-1111
• /
• 2007

OLED driving voltage shift can reduce the OLED display lifetime, especially for digitally driven AMOLED. By operating OLED at high frequency, we were able to suppress OLED voltage shift degradation, expecting improved AMOLED lifetime. We describe frequency dependence of voltage shift obtained from bias stress test of OLED.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.456-459
• /
• 1993

A new filter-bank is proposed in order to track center frequency of narrow bard signal. The filter-bark proposed here has a laster and a slave filter bark. The two barks are connected in series-parallel. The master filter bank which is made of traditional filter bank detects the center frequency roughly. And the performance for tracking center frequency is greatly improved by the slave filter bank which is based or energy-difference estimator. Computer simulations show that it achieves a good tracking accuracy.

• Proceedings of the KAIS Fall Conference
• /
• 2004.06a
• /
• pp.172-175
• /
• 2004

This paper analyzes the effects of Ge profiles shape of SiGe heterojunction bipolar transistors (HBT's) for high frequency application. Device simulations using ATLAS/BLAZE for the SiGe HBT with trapezoidal or triangular Ge profile are carried out to optimize the device performance. An HBT with $15\%$ triangular Ge profile shows higher cut-off frequency and DC current gain than that with $19\%$ trapezoidal Ge profile. The cut-off frequency and DC gain are increased from 42GHz to 84GHz and from 200 to 600, respectively. The SiGe HBT has been fabricated using a production CVD reactor.