• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.11b
• /
• pp.50-55
• /
• 1999

Sizing development of AKD-sized paper by beta-ketoester formation has been debated until recent years because of absence of its obvious and direct spectroscopic evidence. In this study, reaction between AKD and cellulose was investigated to disclose the possibility of beta-ketoester formation between two components under no catalyzed neutral condition. In absence of water, AKD reacted with cellulose to form beta-ketoester linkage under no catalyzed neutral condition, while, in presence of water, most of AKD was hydrolyzed to a dialkyl ketone or beta-ketoacid. Therefore, the main mechanism of AKD sizing would not be the formation of beta-ketoester between AKD and cellulose in the papermaking process. It could be suggested that the sizing development of AKD-sized paper is obtained by next two mechanisms: 1) formation of a thin-layer of AKD on the fiber surface through melting and spreading of AKD emulsion particles by heat, and 2) the formation of ketone by the hydrolysis of AKD during drying and storage of AKD-sized papers.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.8
• /
• pp.1291-1298
• /
• 2015

Five different polymer nanofibers, namely, polyaniline nanofiber (PANI), magnetically separable polyaniline nanofiber (PAMP), magnetically separable DEAE cellulose fiber (DEAE), magnetically separable CM cellulose fiber (CM), and polystyrene nanofiber (PSNF), have been used for the immobilization of lactase (E.C. 3.2.1.23). Except for CM and PSNF, three polymers showed great properties. The catalytic activities (k_cat) of the free, PANI, PAMP, and magnetic DEAE-cellulose were determined to be 4.0, 2.05, 0.59, and 0.042 mM/min·mg protein, respectively. The lactase immobilized on DEAE, PANI, and PAMP showed improved stability and recyclability. PANI- and PAMP-lactase showed only a 0-3% decrease in activity after 3 months of vigorous shaking conditions (200 rpm) and at room temperature (25℃). PANI-, PAMP-, and DEAE-lactase showed a high percentage of conversion (100%, 47%, and 12%) after a 1 h lactose hydrolysis reaction. The residual activities of PANI-, PAMP-, and DEAE-lactase after 10 times of recycling were 98%, 96%, and 97%, respectively.

• Membrane and Water Treatment
• /
• v.10 no.3
• /
• pp.213-221
• /
• 2019

Anaerobic digestion (AD) has been widely used to valorize food waste (FW) because of its ability to convert organic carbon into $CH_4$ and $CO_2$. Korean FW has a high content of fruits and vegetables, and efficient hydrolysis of less biodegradable fibers is critical for its complete stabilization by AD. This study examined the digestates from different anaerobic digesters, namely Rs, Rr, and Rm, as the inocula for the AD of vegetable waste (VW) and cellulose (CL): Rs inoculated with anaerobic sludge from an AD plant, Rr inoculated with rumen fluid, and Rm inoculated with anaerobic sludge and augmented with rumen fluid. A total of six conditions ($3\;inocula{\times}2\;substrates$) were tested in serial subcultures. Biogas yield was higher in the runs inoculated with Rm than in the other runs for both VW (up to 1.10 L/g VS added) and CL (up to 1.05 L/g VS added), and so was biogas production rate. The inocula had different microbial community structures, and both substrate type and inoculum source had a significant effect on the formation and development of microbial community structures in the subcultures. The overall results suggest that the bioaugmentation with rumen microbial consortium has good potential to enhance the anaerobic biodegradability of VW, and thereby can help more efficiently digest high fiber-content Korean FW.

• Journal of the Korean Wood Science and Technology
• /
• v.50 no.6
• /
• pp.436-447
• /
• 2022

Lignocellulose nanofibrils (LCNFs) were prepared using a two-step deep eutectic solvent (DES) and enzymatic pretreatment followed by mechanical defibrillation, and we examined the effects of enzymatic pretreatment conditions on different characteristics of the LCNFs thus obtained. The LCNFs yielded using the two-step DES pretreatment (Enz-LCNF) exhibited a well-defibrillated entangled web-like structure with an average fiber diameter ranging from 15.7 to 20.4 nm. Furthermore, we found that the average diameter and filtration time of the Enz-LCNFs decreased with an increase in enzyme concentration and enzymatic treatment time, whereas we detected a concomitant reduction in the tensile strength of the Enz-LCNF sheets. The Enz-LCNFs were characterized by a typical cellulose I structure, thereby indicating that the enzymatic treatment causes very little damage to the crystalline form.

• Textile Coloration and Finishing
• /
• v.27 no.1
• /
• pp.1-10
• /
• 2015

The aim of the current study is to identify the dimerization and decomposition kinetics of the F-$D_M$ type. The regeneration of F-VS from $F_iF_j-D_M$ or the reversibility of the dimerizations were investigated. The order of real rate constants of the dimerization('$K_D{^{ij}}$) would seem to be similar to that of rate constants of a dimerization($K_D{^{ij}}$) for VS dyes at a given pH because of the constancy of the equilibrium constants($K_a{^j}$-value). The reverse reactions of the $D_M$ types are appeared to occur in two steps, the deprotonation of ${\alpha}$-carbon of the $D_M$ types and disproportionation. The ratio of the decomposition of the $D_M$ type to F-Hy and F-VS appears to be related with the ratio of $K_i/K_j$. Similarities were also found among various other reactions, including homo- and mixed dimerization. VS dyes undergoing fast hydrolysis have difficulty in forming a dimer. The higher the reactivity with cellulose or hydroxide ion, the smaller the dimerization. The easiness of the dimerization was thus found to be inversely proportional to the rate of hydrolysis.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.9
• /
• pp.1244-1252
• /
• 2013

Sugar beet pulp is an abundant industrial waste material that holds a great potential for bioethanol production owing to its high content of cellulose, hemicelluloses, and pectin. Its structural and chemical robustness limits the yield of fermentable sugars obtained by hydrolyzation and represents the main bottleneck for bioethanol production. Physical (ultrasound and thermal) pretreatment methods were tested and combined with enzymatic hydrolysis by cellulase and pectinase to evaluate the most efficient strategy. The optimized hydrolysis process was combined with a fermentation step using a Saccharomyces cerevisiae strain for ethanol production in a single-tank bioreactor. Optimal sugar beet pulp conversion was achieved at a concentration of 60 g/l (39% of dry weight) and a bioreactor stirrer speed of 960 rpm. The maximum ethanol yield was 0.1 g ethanol/g of dry weight (0.25 g ethanol/g total sugar content), the efficiency of ethanol production was 49%, and the productivity of the bioprocess was 0.29 $g/l{\cdot}h$, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.2
• /
• pp.232-242
• /
• 2017

The objective of this study was to examine changes in the porosity and internal structure of wood as it goes through the process of saccharification (extraction of fermentable sugars). This study also examined the use of different drying methods to prepare samples for characterization of internal pores, with particular emphasis on the partially disrupted cell wall. Aspen wood flour samples after dilute acid pretreatment followed by enzymatic hydrolysis were examined for nitrogen adsorption. The resulting isotherms were analyzed for surface area, pore size distribution, and total pore volume. Results showed that freeze drying (with sample pre-freezing) maintains the cell wall structure, allowing for examination of saccharification effects. Acid pretreatment (hemicellulose removal) doubled the surface area and tripled the total volume of pores, which were mostly 10-20 nm wide. Subsequent enzymatic hydrolysis (cellulose removal) caused a 5-fold increase in the surface area and a ~ 11-fold increase in the total volume of pores, which ranged from 5 to 100 nm in width. These results indicate that nitrogen adsorption analysis is a feasible technique to examine the internal pore structure of lignocellulosic residues after saccharification. The information on the pore structure will be useful when considering value-adding options for utilizing the solid waste for biofuel production.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.4
• /
• pp.56-63
• /
• 2010

Microcrystalline cellulose (MCC) was prepared from Miscanthus in this study. Two pulping methods, soda pulping and alkaline sulfite pulping were applied as a pretreatment process. After pulping, two different bleaching processes such as $ClO_2$ treatment followed by $H_2O_2$ treatment and $O_3$ treatment followed by $H_2O_2$ treatment were carried out. Two concentration of $H_2SO_4$, 47% and 57% were applied to the purified Miscanthus cellulose as a acid hydrolysis process to make MCC. The crystallinity index and morphological properties of the produced MCC were evaluated with X-ray diffractometer and scanning electron microscopy. The MCC originated from the soda pulping sample showed the higher crystallinity index than that originated from the alkaline sulfite pulping sample. The two stages of treatmen twith $O_3$ and $H_2O_2$ resulted in the higher purified cellulose products.

• Journal of Life Science
• /
• v.23 no.11
• /
• pp.1365-1370
• /
• 2013

Immobilized cellulase on weak ion exchange resin showed a typical Langmuir adsorption isotherm. Immobilized cellulase had better stability with respect to pH and temperature than free cellulase. Kinetics of thermal inactivation on free and immobilized cellulase followed first order rate, and immobilized cellulase had a longer half-life than free cellulase. The initial rate method was used to characterize the kinetic parameters of free and immobilized enzyme. The Michaelis-Menten constant $K_m$ was higher for the immobilized enzyme than it was for the free enzyme. The effect of the recirculation rate on cellulose degradation was studied in a recycling packed-bed reactor. In a continuous packed-bed reactor, the increasing flow rate of cellulose decreased the conversion efficiency of cellulose at different input lactose concentrations. Continuous operation for five days was conducted to investigate the stability of long term operation. The retained activity of the immobilized enzymes was 48% after seven days of operation.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.6
• /
• pp.578-584
• /
• 2009

We investigated acid hydrolysis characteristics of yellow poplar woodmeal with concentrated sulfuric acid for high concentration of monosaccharides production. Woodmeal to 72% sulfuric acid ratio (w/w), $2^{nd}$ hydrolysis temperature and time were main variables for finding optimum reaction condition. Optimum woodmeal to 72% sulfuric acid ratio was 1 : 2.61 (w/w) and $2^{nd}$ hydrolysis temperature and time was $105^{\circ}C$ and 40 min as 44.8 g/L of glucose and 25.2 g/L of xylose in hydrolysis solution. In this acid hydrolysis solution, furfural, 5-HMF, low molecular weight phenolic compounds were identified. Furfural and 5-HMF concentration were increased as increasing $2^{nd}$ hydrolysis time. More than 40 min of $2^{nd}$ hydrolysis at $110^{\circ}C$, xylose concentration was decreased but glucose concentration was leveled out because xylose to furfural reaction was faster than xylan to xylose, but cellulose to glucose reaction was similar rate with glucose to 5-HMF at that $2^{nd}$ hydrolysis reaction condition.