• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.3 s.174
• /
• pp.603-612
• /
• 2000

Corrosion characteristics on the 12Cr alloy steel of turbine blade was electro-chemically investigated in 3.5wt% NaCI and 12.7wt% Na2S04 solution, respectively. Electro-chemical polarization test, Huey test and Oxalic acid etching test were previously conducted to estimate corrosion susceptibility of the material. And, using the horizontal corrosion fatigue tester, corrosion fatigue characteristics of 12Cr alloy steel in distilled water, 3.5wt% NaCI solution, and 12.7wt%(1M) Na2S04 solution were also fracture-mechanically estimated and compared their results. Parameter considered was room temperature, 60'C and 90'C. Corrosion fatigue crack length was measured by DC potential difference method.Obtained results are as follows,1) 12Cr alloy steel showed high corrosion rate in 3.5wt% NaCI solution and Na2S04 solution at high tempratue.2) Intergranular corrosion sensitivity of 12 Cr alloy was smaller than austenitic stainless steel.3) Corrosion fatigue crack growth rate in 3.5wt% NaCI and 12.7wt%(IM) Na2S04 solution is entirely higher than in the distilled water, and also increased with the temperature increase.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.2
• /
• pp.137-142
• /
• 2013

The indiscriminate use of the fossil fuel has caused serious environmental pollutions such as the shortage of energy and global warming. Microalgae have being emphasized as $3^{rd}$ generation biomass which makes the carbon dioxide reduce effectively as well as produces the biofuel. Large scale production of microbial biomass by continuous culture is a quite challenging issue, because off-line optimization strategies of a microbial process utilizing a model-based scheme give rise to many difficult problems. In this paper, the static and simple control method which was able to be applied in time-variant growth environment and large scale of algae culture was studied. The significant disturbances in on-line measurement of cell density were reduced by Savitzky-Golay FIR smoothing filter. Dunaliella salina was cultivated continuously in a flat panel photobioreactor by the on-off control of the turbidostat process.

• Applied Chemistry for Engineering
• /
• v.24 no.5
• /
• pp.489-493
• /
• 2013

The most common carbonaceous anode materials of lithium ion batteries (natural graphite, artificial graphite, hard carbon, and mesocarbon microbeads) were utilized as an electrode in lithium ion capacitors. It could be able to enhance the energy density of capacitors due to the intercalation of lithium ion. In this work, the properties of capacitors using the symmetric electrode were measured by organizing coin cell typed capacitors. Also, we made other capacitors having pre-intercalated lithium ions at one side of the electrode. The results of electrochemical measurements for these capacitors show that the storage capacitance was appeared. In other words, if the migration of lithium ions is supplied continuously in the electrolytes, lithium ions can be diffused into the carbonaceous materials. And it results in the improvement of capacitance compared to only using symmetric carbonaceous electrodes. Also, we conducted the same measurement with graphene oxide having a the large specific area in the same condition. Herein, we recognized that the large specific area is extremely important for supercapacitors.

• Journal of Animal Environmental Science
• /
• v.8 no.3
• /
• pp.191-198
• /
• 2002

This study was conducted to determine changes in internal temperature and chemical composition during the composting of broiler litter(BL) and to evaluate the feasibility of use of a small-scale pelletizer for the pelleting of composted BL. BL was composted for 4 weeks in an wooden cell with a size of 1 m length $\times$ 1 m width $\times$ 1.2 m height. Internal temperature reached to peak(68$^{\circ}C$) at the fourth day and thereafter gradually reduced. Among chemical components in BL, composting reduced organic matter content and increased dry matter and indigestible protein(ADF-CP) contents. When BL was pelleted using an economical small-scale pelletizer, the proper die diameter was 8~18 mm and the proper moisture content of composted BL was 20~25%. Beyond these proper conditions, addition of heat and pressure or pellet aids may be necessary. Pelleting of BL resulted in nearly threefold increase of bulk density, significant moisture evaporation, and little change in chemical components except for increased indigestible protein. In conclusion, BL may be converted into a feed with low to medium nutrition by the composting and pelleting process.

• Journal of Life Science
• /
• v.12 no.5
• /
• pp.535-543
• /
• 2002

To investigate the possibility of processing semi-dried jellyfish and to examine its keeping quality, the factors such as moisture content, pH, volatile basic nitrogen (VBN), viable cell counts, color value and texture were analyzed. For processing of the semi-dried product, optimum conditions of drying temperature and drying time were $25^{\circ}C$ and 90min, respectively, under 60 $\pm$ 5% of relative humidity and 2 m/sec of air blast speed. The shelf-life of the products, vacuum-packing method in nylon/polyethylene/linear low density polyethylene (0.015/0.045/0.040 mm) laminated film bag was at least 6 weeks during storage at 4$^{\circ}C$, while that of air packaged one was at least 4 weeks. In case of 2$0^{\circ}C$ storage the shelf-life of the products was at least 3 weeks in both air and vacuum packaged ones.

• Membrane and Water Treatment
• /
• v.6 no.5
• /
• pp.423-437
• /
• 2015

Polyvinylidene fluoride/fullerene nanoparticle (PVDF/$C_{60}$) composite microfiltration (MF) membranes were fabricated by a non-solvent induced phase separation (NIPS) using N, N-dimethylacetamide (DMAc) as solvent and deionized water (DI) as coagulation solution. Polyvinylpyrrolidone (PVP) was added to the casting solution to form membrane pores. $C_{60}$ was added in increments of 0.2% from 0.0% to 1.0% to produce six different membrane types: one pristine PVDF membrane type with no $C_{60}$ added as control, and five composite membrane types with varying $C_{60}$ concentrations of 0.2, 0.4, 0.6, 0.8 and 1.0%, respectively. The mechanical strength, morphology, pore size and distribution, hydrophilicity, surface property, permeation performance, and fouling resistance of the six membranes types were characterized using respective analytical methods. The results indicate that membranes containing $C_{60}$ have higher surface porosity and pore density than the pristine membrane. The presence of numerous pores on the membrane caused weaker mechanical strength, but the water flux of the composite membranes increased in spite of their smaller size. Initial flux and surface roughness reached the maximum point among the composite membranes when the $C_{60}$ concentration was 0.6 wt.%.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.7
• /
• pp.1985-1988
• /
• 2014

$Cu_2ZnSnSe_4$ (CZTSe) thin films were synthesized on transparent conducting oxide glass substrates via a simple, non-toxic, and low-cost process using a precursor solution paste. A three-step heating process (oxidation, sulfurization, and selenization) was employed to synthesize a CZTSe thin film as an absorber layer for use in thin-film solar cells. In particular, we focused on the effects of sulfurization conditions on CZTSe film formation. We found that sulfurization at $400^{\circ}C$ involves the formation of secondary phases such as $CuSe_2$ and $Cu_2SnSe_3$, but they gradually disappeared when the temperature was increased. The formed CZTSe thin films showed homogenous and good crystallinity with grain sizes of approximately 600 nm. A solar cell device was tentatively fabricated and showed a power conversion efficiency of 2.2% on an active area of 0.44 $cm^2$ with an open circuit voltage of 365 mV, a short current density of 20.6 $mA/cm^2$, and a fill factor of 28.7%.

• Korean Journal of Environmental Biology
• /
• v.21 no.2
• /
• pp.132-141
• /
• 2003

We carried out a study on thermohaline structure and phytoplankton com munity in the East China Sea during early summer in 2005. As a result of marine environment and phytoplankton community, three characteristics of water type were identified. The former was characterized by the dominant species with diatoms, Chaetoceros lacinious, Ch. decipiens, Guninardia flaccida, Paralia sulcata, Pseudonitzschia pungens and Pseudosolenia calcar-avis in Chinese coastal waters, the secondary was done by lower water temperature, salinity and the dominant species with dinoflagellates, Prorocentrum donghaiense and Ceratium fusus, in over-all areas and the latter was done by the dominant species with coastal species of diatoms, Skeletonema costafum and Nitzschia longissima and silicoflagellate, Dictyocha speculum var. octopers in the transfer areas of Chinese continental coastal waters. Phytoplankton community in the surface layer identified a total of 66 species belonging to 36 genera. Dominant species was Prorocentrum donghaiense, Chaetoceros lacinious, Skeletonema costatum. Standing crops of phytoplankton in the surface layer flue tuated between $1.5 \times 10^4$cells $L^{-1}$ and $3.5\times 10^{5}$ cells $L^{-1}$. And the highest value appeared in the Changjiang estuaries with high dominance by diatoms and lowest one occurred in the southwestern area of Jeju Island with high dominance by dinoflagellates. Red tides with dinoflagellate, Prororcentrum donghaiense appeared in the frontal areas with mazimum cell density, $3.4\times 10^5$ cells $L^{-1}$. And outbreak environments was low water temperature under $20^{\circ}C$, and low salinity under 31.55 psu. The vertical distribution of red tide organisms went to about 30m depth from surface.

• Journal of Sensor Science and Technology
• /
• v.6 no.2
• /
• pp.163-171
• /
• 1997

CdS thin films for window material of solar cell were prepared by close spaced vapor transport deposition system and annealed at different temperatures. The structural, electrical, and optical properties of as-deposited and annealed CdS films were investigated as functions of substrate and annealing temperatures. The CdS thin films were grown perpendicularly to the substrate along the (002)plane with hexagonal structure regardless of the preparation conditions The resistivity of the CdS film deposited was increased gradually from $60{\Omega}cm$ for $25^{\circ}C$ to $2{\times}10^{4}{\Omega}cm$ for $300^{\circ}C$. The optical transmittance at the substrate temperature of $25^{\circ}C$ was about 80% in the the visible spectrum. The resistivity increased monotonically, and the optical transmittance was decreased substantially with annealing temperature due to the increased defect density in the CdS film.

• Applied Microscopy
• /
• v.34 no.4
• /
• pp.223-230
• /
• 2004

To identify the structural basis of mutations that affect synaptic transmission we have begun quantitative ultrastructural descriptions of synapses in cultured Drosophila embryonic neurons. In wild-type cultures, synapses are distinguished by the parallel arrangement of a thickened pre- and post synaptic membrane separated by a synaptic cleft. The presynaptic active zones and postsynaptic densities are defined by electron dense material close to the membrane. Presynaptic regions are also characterized by the presence of one or more electron dense regions, presynaptic densities, around which a variable number of small, clear core synaptic vesicles (mean $35.1{\pm}1.44$ nm in diameter) are clustered. Subsets of these vesicles are in direct contact with either the presynaptic density or the membrane and are considered morphologically docked. A small number of larger, dense core vesicles are also observed in most presynaptic profiles.