• 한국분말재료학회지
• /
• 제26권2호
• /
• pp.126-131
• /
• 2019

In the present work, a new hydrogen added argon heat treatment process that prevents the formation of hydrides and eliminates the dehydrogenation step, is developed. Dissolved hydrogen has a good effect on sintering properties such as oxidation resistance and density of greens. This process can also reduce costs and processing time. In the experiment, commercially available Ti-6Al-4V powders are used. The powders are annealed using tube furnace in an argon atmosphere at $700^{\circ}C$ and $900^{\circ}C$ for 120 min. Hydrogen was injected temporarily during argon annealing to dissolve hydrogen, and a dehydrogenation process was performed simultaneously under an argon-only atmosphere. Without hydride formation, hydrogen was dissolved in the Ti-6Al-4V powder by X-ray diffraction and gas analysis. Hydrogen is first solubilized on the beta phase and expanded the beta phases' cell volume. TGA analysis was carried out to evaluate the oxidation resistance, and it is confirmed that hydrogen-dissolved Ti-6Al-4V powders improves oxidation resistance more than raw materials.

• Journal of Applied Biological Chemistry
• /
• 제62권2호
• /
• pp.211-217
• /
• 2019

Dietary pattern has paramount importance in shaping the gut microbiota and its associated host health. Herein this study, long term (12 weeks) impact of mushroom derived dietary fiber, ${\beta}-glucan$, is investigated for its effect on low fiber diet consumption. Inclusion of dietary fiber into the low fiber diet (LFD) increased the abundance of genera Lactobacillus and Anaerostipes, the microbes responsible for butyrate (major 'fuel source' of colonocytes) production. Mice fed LFD with ${\beta}-glucan$ showed significant increase in the length of small intestine compared to that of the LFD group without ${\beta}-glucan$. Further, dietary fiber consumption enhanced goblet cell density along with mucosal layer thickness. These results indicate promising effects of ${\beta}-glucan$ towards maintenance of healthy gut and gut microbiota.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권4호
• /
• pp.1866-1883
• /
• 2019

As the youngest branch of information hiding, network covert timing channels conceal the existence of secret messages by manipulating the timing information of the overt traffic. The popular model-based framework for constructing covert timing channels always utilizes cumulative distribution function (CDF) of the inter-packet delays (IPDs) to modulate secret messages, whereas discards high-order statistics of the IPDs completely. The consequence is the vulnerability to high-order statistical tests, e.g., entropy test. In this study, a rich security model of covert timing channels is established based on IPD chains, which can be used to measure the distortion of multi-order timing statistics of a covert timing channel. To achieve rich security, we propose two types of covert timing channels based on nested lattices. The CDF of the IPDs is used to construct dot-lattice and interval-lattice for quantization, which can ensure the cell density of the lattice consistent with the joint distribution of the IPDs. Furthermore, compensative quantization and guard band strategy are employed to eliminate the regularity and enhance the robustness, respectively. Experimental results on real traffic show that the proposed schemes are rich-secure, and robust to channel interference, whereas some state-of-the-art covert timing channels cannot evade detection under the rich security model.

• Imaging Science in Dentistry
• /
• 제49권3호
• /
• pp.235-240
• /
• 2019

Osteosarcoma is the most common primary bone tumor after plasma cell neoplasms. Osteosarcoma has diverse histological features and is characterized by the presence of malignant spindle cells and pluripotent neoplastic mesenchymal cells that produce immature bone, cartilage, and fibrous tissue. Osteosarcoma most frequently develops in the extremities of long bones, but can occur in the jaw in rare cases. The clinical and biological behavior of osteosarcoma of the jaw slightly differs from that of long-bone osteosarcoma. The incidence of jaw osteosarcoma is greater in the third to fourth decades of life, whereas long-bone osteosarcoma mostly occurs in the second decade of life. Osteosarcoma of the jaw has a lower tendency to metastasize and a better prognosis than long-bone osteosarcoma. Radiographically, osteosarcoma can present as a poorly-defined lytic, sclerotic, or mixed-density lesion with periosteal bone reaction response. Multi-detector computed tomography is useful for identifying the extent of bone destruction, as well as soft tissue involvement of the lesion. The current case report presents a fibroblastic osteosarcoma involving the left hemimandible with very unusual radiographic features.

• Current Photovoltaic Research
• /
• 제7권3호
• /
• pp.61-64
• /
• 2019

In this study, we investigate organic-inorganic hybrid solar cells with a very simple three-layer structure (Al/n-Si/PEDOT:PSS). The performance of hybrid solar cells is optimized by controlling the sheet resistance and optical transmittance of the PEDOT:PSS layers. As the thickness of the PEDOT:PSS layer decreases, the optical absorption of the n-Si increases, which greatly improves the short-circuit current density ($J_{SC}$) of devices, but the increase in sheet resistance leads to a decrease in the open-circuit voltage ($V_{OC}$) and the fill factor (FF). The solar cell with the 180-nm thick PEDOT:PSS layer shows a highest efficiency of 8.45% ($V_{OC}$: 0.435 V, $J_{SC}$: $33.7mA/cm^2$, FF: 57.5%). Considering these results, it is expected that the optimizing process for the sheet resistance and transmittance of the PEDOT:PSS layer is essential for producing high-efficiency organic-inorganic hybrid solar cells and will serve as an important basis for achieving low-cost, high-efficiency solar cells.

• 한국자기공명학회논문지
• /
• 제23권1호
• /
• pp.12-19
• /
• 2019

A former study has shown that the spin-lattice relaxation time ($T_1$) in cancerous prostate tissue had enhanced contrast at an ultra-low magnetic field, $132{\mu}T$. To study the field dependence and the origin of the contrast we measured $T_1$ in pairs of ex-vivo prostate tissues at the Earth's magnetic field. A portable and coil-based nuclear magnetic resonance (NMR) system was adopted for $T_1$ measurements at $40{\mu}T$. The $T_1$ contrast, ${\delta}=1-T_1$ (more cancer)/$T_1$(less cancer), was calculated from each pair. Additionally, we performed pathological examinations such as Gleason's score, cell proliferation index, and micro-vessel density (MVD), to quantify correlations between the pathological parameters and $T_1$ of the cancerous prostate tissues.

• 한국수소및신에너지학회논문집
• /
• 제30권2호
• /
• pp.147-154
• /
• 2019

In this study, effects of flow types and size of molten carbonate fuel cells (MCFCs) were investigated using CFD simulation. In the simulation, the current collector of MCFCs were assumed to be an porous media. With the area of $0.09m^2$, the effect of flow types such as Co-flow, Counter-flow, Cross-flow were studied. After that the effect of the size and flow direction was studied. Among three-flow types, MCFCs with co-flow type shows more uniform distribution and current density distribution.

• 한국초전도ㆍ저온공학회논문지
• /
• 제23권3호
• /
• pp.41-44
• /
• 2021

We developed an optimization process of the pulsed laser deposition method to grow epitaxial CeCoIn₅ thin films on MgF₂ substrates. The effects of different deposition parameters on film growth were extensively studied by analyzing the measured X-ray diffraction patterns. All the deposited films contained small amounts of CeIn₃ impurity phase and misoriented CeCoIn₅, for which the c-axis of the unit cell is perpendicular to the normal vector of the substrate surface. The deposition temperature, target composition, laser energy density, and repetition rate were found effective in the formation of (00l)-oriented CeCoIn₅ as well as the undesired phases such as CeIn₃, misoriented CeCoIn₅ along the (112) and (h00). Our results provide a set of deposition parameters that produce high-quality epitaxial CeCoIn₅ thin films with sufficiently low amounts of impurity phases and can serve as a reference for future studies to optimize the deposition process further.

• KEPCO Journal on Electric Power and Energy
• /
• 제7권1호
• /
• pp.137-143
• /
• 2021

As an electrochemical water electrolysis for green hydrogen production, both polymer electrolyte membrane (PEM) and alkaline electrolyte are being developed extensively in various countries. The PEM electrolyzer with high current density (above 2 A/cm²) has the advantage of being able to design a simple structure. Also, it is known that it has high response to electrical output fluctuations. However, the cost problem of major components is the most important issue that a PEM electrolyzer must overcome. Instantly, there are platinum group metal (PGM)-based electrocatalysts, fluorine-based polyfluoro sulfuric acid (PFSA) membrane, Ti felt (porous transport layer, PTL) and so on. Another challenging issue is productivity. A securing outstanding productivity brings price benefits of the electrolytic cells. From this point of view, we conducted basic studies on manufacturing electrode and membrane electrode assembly (MEA) for PEM electrolyzer production.

• 한국표면공학회지
• /
• 제54권4호
• /
• pp.164-170
• /
• 2021

Vanadium redox flow batteries (VRFB) have emerged as large-scale energy storage systems (ESS) due to their advantages such as low cross-contamination, long life, and flexible design. However, Hydrogen evolution reaction (HER) in the negative half-cell causes a harmful influence on the performance of the VRFB by consuming current. Moreover, HER hinders V²⁺/V³⁺ redox reaction between electrode and electrolyte by forming a bubble. To address the HER problem, carbon nanotube/graphite felt electrode (CNT/GF) with oxygen functional groups was synthesized through the hydrothermal method in the H₂SO₄ + HNO₃ (3:1) mixed acid solution. These oxygen functional groups on the CNT/GF succeed in suppressing the HER and improving charge transfer for V²⁺/V³⁺ redox reaction. As a result, the oxygen functional group applied electrode exhibited a low overpotential of 0.395 V for V²⁺/V³⁺ redox reaction. Hence, this work could offer a new strategy to design and synthesize effective electrodes for HER suppression and improving the energy density of VRFB.