• Current Photovoltaic Research
• /
• 제7권1호
• /
• pp.15-20
• /
• 2019

Most high-efficiency n-type silicon solar cells are based on the high quality surface passivation and ohmic contact between the emitter and the metal. Currently, various metalization methods such as screen printing using metal paste and physical vapor deposition are being used in forming electrodes of n-type silicon solar cell. In this paper, we analyzed the degradation factors induced by the front electrode formation process using e-beam evaporation of double passivation structure of p-type emitter and $Al_2O_3/SiN_x$ for high efficiency solar cell using n-type bulk silicon. In order to confirm the cause of the degradation, the passivation characteristics of each electrode region were determined through a quasi-steady-state photo-conductance (QSSPC).

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.36.1-36.1
• /
• 2010

While the substrate-type solar cells with Cu(In,Ga)Se2 absorbers yield conversion efficiencies of up 20%[1], the highest published efficiency of Cu(In,Ga)Se2 superstrate solar cell is only 12.8% [2]. The commerciallized Cu(In,Ga)Se2 solar cells are made in the substrate configuration having the stacking sequence of substrate (soda lime glass)/back contact (molybdenum)/absorber layer (Cu(In,Ga)Se2)/buffer layer (cadmium sulfide)/window layer (transparent conductive oxide)/anti reflection layer (MgF2) /grid contact. Thus, it is not possible to illuminate the substrate-type cell through the glass substrate. Rather, it is necessary to illuminate from the opposite side which requires an elaborate transparent encapsulation. In contrast to that, the configuration of superstrate solar cell allows the illumination through the glass substrate. This saves the expensive transparent encapsulation. Usually, the high quality Cu(In,Ga)Se2 absorber requires a high deposition temperature over 550C. Therefore, the front contact should be thermally stable in the temperature range to realize a successful superstrate-type solar cell. In this study, it was tried to make a decent superstrate-type solar cell with the thermally stable ZnO:Al layer obtained by adjusting its deposition parameters in magnetron sputtering process. The effect of deposition condition of the layer on the cell performance will be discussed together with hall measurement results and current-voltage characteristics of the cells.

• Applied Microscopy
• /
• 제22권1호
• /
• pp.1-14
• /
• 1992

Parenchyma of the cat pineal body consisted of pinealocytes and glial cells. The pinealocyte, predominant cell type, was characterized by having large mitochondria with pale matrix, abundant polyribosomes, moderately-developed Golgi apparatus, centrioles and occasional cilia. The pinealocyte had one thick and long cytoplasmic process at the one pole of the cell, and slender and shorter processes at the other pole, and in addition occasional short processes from the cell body. These processes contained longitudinally arranged microtubules, and a few mitochondria. Thick processes teminated as bulgings either in the intercellular process-rich area, or in the perivascular border which was formed by glial cell processes. These endings of pinealocyte processes had many small vesicles, mitochondria, and occasional dense bodies. Glial cells with abundant filaments of intermediate type and clear cytoplasmic matrix were fibrous astrocyte. Perikarya of the astrocytes had small and dense mitochondria, moderately developed Golgi apparatus, dense bodies and variable amount of intermediate filaments. Glial cell processes run through the intercellular spaces among the pinealocyte processes. Glial cell of protoplasmic type had no or a few filaments, but it had well-organized rough endoplasmic reticulum, dense mitochondria, well developed Golgi apparatus and many dense granules. Intercellular canaliculi formed by adjacent pinealocytes and glial cell processes were often noted. Within the parenchyma, sympathetic and parasympathetic axons and their endings were noted. These endings were present mostly in the intercellular spaces without having membrane specialization, however, in rare instances, ending with small clear and dense cored vesicles, and large dense cored vesicles formed specialized synapse with a pinealocyte process. Within the perivascular spaces nerve fibers and endings, Schwann cells and pericyte were noted. In rare case pinealocyte process penetrated into the perivascular space through the interuptions of glial border. These results suggest that pinealocyte of the cat has less significance in secretory function and is rather neural type of cell.

• Macromolecular Research
• /
• 제17권11호
• /
• pp.856-862
• /
• 2009

This study examined the effects of liquid and solid additives on the morphological, mechanical and thermal insulating properties of rigid polyurethane foams (PUFs). The PUFs synthesized with tetramethylsilane (TEMS) as a liquid-type additive showed a smaller average cell size and lower thermal conductivity than those with the aerosil 200 and clay 30B as solid-type additives. When TEMS was added, the average cell size of the PUF became more uniform and finer due to the reduced surface tension of the polymer solution, which increased the nucleation rate and number of bubbles produced and reduced cell size. The PUFs with TEMS showed the highest closed cell contents among the PUFs prepared using TEMS, aerosil 200 and clay 30B. This suggests that the insulation properties of PUF can be determined by both the size of the cell structure and the amount of closed cell contents in the system. The compression and flexural strengths of the PUF increased slightly when the aerosil 200, clay 30B and TEMS were added compared those of the neat PUF. The reaction profiles of the PUFs showed a similar gel and tack tree time with the reaction time among the PUFs synthesized with three different additives and neat PUF. This suggests that the nucleating additives used in this study do not affect the bubble growth of the chemical reaction, and the additives may act as nucleating agents during the formation of PUF. From the above results of the cell size, thermal conductivity, closed cell contents and reaction profile of the PUFs, liquid-type nucleating agent, such as TEMS, is more effective in decreasing the thermal conductivity of the PUF than solid-type nucleating agent, such as aerosil 200 and clay 30B.

• 대한기관식도과학회지
• /
• 제6권2호
• /
• pp.181-184
• /
• 2000

Catsleman's disease is a type of angiofolliculr lymph node hyperplasia and its etiology is not known yet. It usually presents with the mediastinal mass but rarely with the parotid mass. There are only five cases previously reported in the literatures. It has two pathologic types, which are hyaline vascular type and plasma cell type. Plasma cell type is frequently associated with systemic menifestations. Diagnosis is based on the histopatholgic findings. Treatment is surgical excision. A case of Catsleman's disease involving the parotid lymph node is presented and literatures are reviewed.

• 대한수의학회지
• /
• 제28권2호
• /
• pp.221-226
• /
• 1988

Normal swine brains at 1 to 70 days after birth were used to investigate the presence and morphology of the subependymal layer (SL) in the ventricle walls. The brain samples were taken from 27 pigs of 4 swine breeds. The results were summarized as follows: 1. SLs were observed on the walls of the lateral ventricle (LV) but none were observed on the walls of the 3th and 4th ventricles. 2. SLs of the LV walls were composed of mainly 3-to 10-cell layers in thickness. The thinest region of SLs was composed of only 1-to 2-cell thick on the dorsal and ventral walls, and the thickest region was composed of 250-to 300-cell thick on extension region of the SLs into the angle between the corpus callosum and caudate nucleus. 3. Of the LV parts observed, the SL thickness were 25-to 45-cell thick on the anterior horn, 3-to 10-cell thick on the body, 100-to 220-cell thick on the angle region between the corpus callosum and caudate nucleus, and 3-to 5-cell thick the superior walls of the posterior horn. Also the SL thickness was more thick on the anterior region than those on the posterior region. 4. SLs may be classified as three types by the cell distribution; one type of them is closely arranged cell region with the distinctive lateral margin from the periventricular white matter, the other type is loosely arranged cell region with the undistinctive lateral margin, and another type is two-subdivided region as the loosely and closely arranged cell layers in a layer. 5. SLs were extensively thick in young age but gradually decreased in size and cell number with age after 20-day age. SL layers were composed of mainly oligodendrocytes, astrocytes and immature cells of them. Morphological differences of SL in different breeds of pigs were not observed.

• 한국가시화정보학회지
• /
• 제19권2호
• /
• pp.56-62
• /
• 2021

Solid oxide fuel cells (SOFCs) is the high efficiency fuel cell operating at high temperatures ranging from 700-1000℃. Design of the flow paths of the fuel and air in SOFCs is important to improve cell performance and prevent cell degradation. However, the uneven distribution of current density in the traditional type having one inlet and outlet causes cell degradation. In this regard, the parallel flow path with two inlet and outlets was designed and compared to the traditional type based on computational fluid dynamics (CFD) simulation. To check the cell performance, hydrogen distribution, velocity distribution and current density distribution were monitored. The results validated that the parallel designs with two inlets and outlets have a higher cell performance compared to the traditional design with one inlet and outlet due to a larger reaction area. In case of uniform-type paths, more uniform current density distribution was observed with less cross-sectional variation in flow paths. In case of contracted and expanded inflow paths, significant improvement of performance and uniform current density was not observed compared to uniform parallel path. Considering SOFC cell with uniform current density can prevent cell degradation, more suitable design of SOFC cell with less cross-sectional variation in the flow path should be developed. This work can be helpful to understand the role of flow distribution in the SOFC performance.

• 전기화학회지
• /
• 제13권1호
• /
• pp.10-18
• /
• 2010

Nanostructured metal oxides have been widely used in the research fields of photoelectrochemistry, photochemistry and opto-electronics. Dye-sensitized solar cell is a typical example because it is based on nanostructured $TiO_2$. Since the discovery of dye-sensitized solar cell in 1991, it has been considered as a promising photovoltaic solar cell because of low-cost, colorful and semitransparent characteristics. Unlike p-n junction type solar cell, dye-sensitized solar cell is photoelectrochemical type and is usually composed of the dye-adsorbed nanocrystalline metal oxide, the iodide/tri-iodide redox electrolyte and the Pt and/or carbon counter electrode. Among the studied issues to improve efficiency of dye-sensitized solar cell, nanoengineering technologies of metal oxide particle and film have been reviewed in terms of improving optical property, electron transport and electron life time.

• Journal of Yeungnam Medical Science
• /
• 제34권2호
• /
• pp.174-181
• /
• 2017

Ferroptosis is a newly recognized type of cell death that results from iron-dependent lipid peroxidation and is different from other types of cell death, such as apoptosis, necrosis, and autophagic cell death. This type of cell death is characterized by mitochondrial shrinkage with an increased mitochondrial membrane density and outer mitochondrial membrane rupture. Ferroptosis can be induced by a loss of activity of system $X_c{^-}$ and the inhibition of glutathione peroxidase 4, followed by the accumulation of lipid reactive oxygen species (ROS). In addition, inactivation of the mevalonate and transsulfuration pathways is involved in the induction of ferroptosis. Moreover, nicotinamide adenine dinucleotide phosphate oxidase and p53 promote ferroptosis by increasing ROS production, while heat shock protein beta-1 and nuclear factor erythroid 2-related factor 2 inhibit ferroptosis by reducing iron uptake. This article outlines the molecular mechanisms and signaling pathways of ferroptosis regulation, and explains the roles of ferroptosis in human disease.

• Genomics & Informatics
• /
• 제19권1호
• /
• pp.3.1-3.12
• /
• 2021

Functional interpretation of noncoding genetic variants associated with complex human diseases and traits remains a challenge. In an effort to enhance our understanding of common germline variants associated with lung cancer, we categorize regulatory elements based on eight major cell types of human lung tissue. Our results show that 21.68% of lung cancer-associated risk variants are linked to noncoding regulatory elements, nearly half of which are cell type-specific. Integrative analysis of high-resolution long-range chromatin interactome maps and single-cell RNA-sequencing data of lung tumors uncovers number of putative target genes of these variants and functionally relevant cell types, which display a potential biological link to cancer susceptibility. The present study greatly expands the scope of functional annotation of lung cancer-associated genetic risk factors and dictates probable cell types involved in lung carcinogenesis.