• Corrosion Science and Technology
• /
• v.5 no.4
• /
• pp.129-136
• /
• 2006

High temperature corrosion behavior of AISI-type 316L stainless steel for the MCFC(molten carbonate fuel cell) bipolar application was studied by immersion test and penetration attack method in anode environment ($650^{\circ}C$, $Li_2CO_3/K_2CO_3=62/38$ mol%, $H_2/CO_2=80/20$ vol%) without or with different $CaCO_3$ content. Not only immersion test method but also morphological observation of samples in the carbonate melts are adopted as experimental methods. With aid of the morphological observation of cross section of samples immersed in a carbonate melt was possible to obtain penetration attack. The concentration effect of $CaCO_3$ inhibitor was investigated in order to verify the optimum concentration for practical application in MCFC stack operation. The corrosion rate in the presence of $CaCO_3$ was proven to be decreased as a function of $CaCO_3$ concentration. The corrosion rate in the presence of $CaCO_3$ was measured with a value of 6.9 mpy which is 2.4 times lower than that of inhibitor-free electrolyte. The cross section microscopy revealed that the internal penetration by oxidation in molten carbonate is very severe. In this case, the attack was occurred not only dissolution loss in the electrolyte by corrosion reaction but also weight gain through oxide layer by internal penetration.

• The Korean Journal of Malacology
• /
• v.27 no.3
• /
• pp.159-165
• /
• 2011

The anatomy and ultrastructure of the digestive diverticulum of Saxidomus purpuratus were described using light and electron microscopy. The digestive diverticulum of dark green color was situated on the gonad and connected to stomach by a primary duct. Digestive diverticulum is composed of numerous digestive tubules. The epithelial layer of digestive tubule, which is simple, is composed of basophilic cells and digestive cells. Basophilic cells are columnar in shape, and the electron density is higher than that of the digestive cell. The cytoplasm has a well-developed endoplasmic reticulum, tubular mitochondria, Golgi complex and membrane-bounded granules of high electron density. Digestive cells are columnar in shape, with development of microvilli on the free surface. Pinocytic vasicles, lysosomes and numerous mitochondria were observed in the apical cytoplasm of digestive cells. The results of this study suggest that basophilic cells and digestive cells in the digestive tubule are specialized in the extracellular and intracellular digestions, respectively.

• Korean Journal of Materials Research
• /
• v.22 no.8
• /
• pp.390-396
• /
• 2012

Ag pastes added to Bi-oxide frits have been applied to the electrode material of Si solar cells. It has been reported that frits induce contacts between the Ag electrodes and the Si wafer after firing. During firing, the control of interfaces among Ag, the glass layer, and Si is one of the key factors for improving cell performance. Specifically, the thermo-physical properties of frits considerably influence Ag-Si contact. Therefore, the thermal properties of frits should be carefully controlled to enhance the efficiency of cells. In this study, the interface structures among Ag electrodes, glass layers, and recrystallites on an $n^+$ emitter were carefully analyzed with the thermal properties of lead-free frits. First, a cross-section of the area between the Ag electrodes and the Si wafer was studied in order to understand the interface structures in light of the thermal properties of the frits. The depth and area of the pits formed in the Si wafer were quantitatively calculated with the thermal properties of frits. The area of the glass layers between the Ag electrodes and Si, and the distribution of recrystallites on the $n^+$ emitter, were measured from a macroscopic point of view with the characteristics of the frits. Our studies suggest that the thermophysical properties should be controlled for the optimal performance of Si solar cells; our studies also show why cell performance deteriorated due to the high viscosity of frits in Ag pastes.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.4
• /
• pp.251-255
• /
• 2021

a-Si is commonly considered as a primary candidate for the formation of passivation layer in heterojunction (HIT) solar cells. However, there are some problems when using this material such as significant losses due to recombination and parasitic absorption. To reduce these problems, a wide bandgap material is needed. A wide bandgap has a positive influence on effective transmittance, reduction of the parasitic absorption, and prevention of unnecessary epitaxial growth. In this paper, the adoption of a-SiO_x:H as the intrinsic layer was discussed. To increase lifetime and conductivity, oxygen concentration control is crucial because it is correlated with the thickness, bonding defect, interface density (D_it), and band offset. A thick oxygen-rich layer causes the lifetime and the implied open-circuit voltage to drop. Furthermore the thicker the layer gets, the more free hydrogen atoms are etched in thin films, which worsens the passivation quality and the efficiency of solar cells. Previous studies revealed that the lifetime and the implied voltage decreased when the a-SiOx thickness went beyond around 9 nm. In addition to this, oxygen acted as a defect in the intrinsic layer. The D_it increased up to an oxygen rate on the order of 8%. Beyond 8%, the D_it was constant. By controlling the oxygen concentration properly and achieving a thin layer, high-efficiency HIT solar cells can be fabricated.

• Clinical and Experimental Reproductive Medicine
• /
• v.31 no.4
• /
• pp.209-215
• /
• 2004

Objective: Embryonic stem (ES) cells could be differentiated into the specific cell types by alternation of culture condition and modification of gene expression. This study was performed to evaluate the differentiation protocol for mouse and human ES cells to insulin secreting cells. Methods: Undifferentiated mouse (JH-I) and human (Miz-hESI) ES cells were cultured on STO feeder layer, and embryoid bodies (EBs) were formed by suspension culture. For the differentiation, EBs were cultured by sequential system with three stage protocol. The differentiating ES cells were collected and marker gene expressions were analyzed by seIni-quantitative RT-PCR in each stage. Amount of secreted insulin levels in culture media of human ES cells were measured by human insulin specific RIA kit. Results: During the differentiation process of human ES cells, GATA-4, a-fetoprotein, glucose transporter-2 and Ngn-3 expression were increased whereas OctA was decreased progressively. Insulin and albuInin mRNAs were expressed from stage IT in mouse ES cells and from stage III in human ES cells. We detected 3.0~7.9 IlU/rnl secretion of insulin from differentiated human ES cells by in vitro culture for 36 days. Conclusion: The sequential culture system could induce the differentiation of mouse and human ES cells into insulin secreting cells. This is the fIrst report of differentiation of human ES cells into insulin secreting cells by in vitro culture with serum and insulin free medium.

• Applied Microscopy
• /
• v.30 no.3
• /
• pp.295-301
• /
• 2000

Five kinds of sensory cells, called A1-, A2-, B-, C-, and D-type cell, respectively, are observed in the epithelial tissue of suker's infundibulum of Cephalopoda, Octopus minor. The A1-type cells lie side by with the B-type cell in the epithelium of sucker's infundibulum. In the A1-type, the nucleus shapes irregularly and the karyolymph appears dark due to its high electron density. The cytoplasm is filled with many vacuoles of various sizes ($0.04\sim0.4{\mu}m$ in diameter), which move to the apical portion of the cell to be secreted via glycocalyx. The A2-type cells are mainly found at the basal portion of the epithelium. The shape of its nucleus is similar to that in the A1-type cell, and the cytoplasm, filiform or in reticular form, shows high electron density. The B-type cell contains an ovoid nucleus and the cytoplasm where lots of vacuoles which resemble the endoplasmic reticulum and electron-dense round granules of various sizes $(0.25\sim0.6{\mu}m)$ are found. The vacuoles and granules are secreted into the free surface via glycocalyx. The C- and D-type cells in simple or stratified layer are observed at the folded portion of the sucker's epithelium. The C-type cell contains a low electron-dense elliptical nucleus, while the D-type cell has an irregular nucleus where beterochromatin is well developed.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.23 no.3
• /
• pp.101-107
• /
• 1997

Phellinus linteus was artificially cultivated in kangwon province in Korea. The air-dried phellinus linteus was frozen in liquid nitrogen tank and powdered in jar. 10g of the powder was extracted with each 200g of ethanol, methanol, distilled water and 1,3-butylene glycol/distilled water 4 hours under refluxing and then the liquidextract was concentrated under reduced pressure. As a result of analysis by high performance liquid chromatography and thin layer chromarography, many kinds of sugar and flavonoids were detected. Also we knew that phellinus linteus' extract had a strong UV-ray absorption. In the efficacy test for applying to cosmetics, free radical scavenging effect was confirmed. As a result, 2% of sample was the most potent inhibitory effect and the free radical savenging activity, was 0.31%. This is more effective than any other meterial. In the test of antioxidative activity against lipid autoxidation, phellinus linteus' extract had a good effect by 46% while vitamine E was 42.3%. The immunological activity of phellinus linteus was showed through the activation of macrophage cell. Actually, phellinus linteus activated macrophage function of 1.1-1.8 times including nitrite production compared to control. The whitening effect of phellinus linteus was showed through the inhibition of tyrosinase activity, melanin biosynthesis of S. bikiniensis and B-16 melanoma cells. Phellinus linteus' extract was showed strong mushroom tyrosinase inhibitory activity with IC50 value of 0.5% and inhibited melanin biosynthesis with 28mm inhibition zone at 0.005%/paper disc in S. bikinniensis, a bacterium used as an indicator organism in this work. Also it inhibited melanin biosynthesis in B-16 melanoma cells with a minimum inhibitory concentration of 0.134%.

• Journal of the Korean institute of surface engineering
• /
• v.51 no.4
• /
• pp.243-248
• /
• 2018

All solid state thin film batteries with two types of cell structure, Pt / $LiCoO_2$ / LiPON / Cu and Pt / $LiCoO_2$ / LiPON / $LiCoO_2$ / Cu, are prepared and their electrochemical performances are investigated to evaluate the effect of $LiCoO_2$ interlayer at the interface of LiPON / Cu. The crystallinity of the deposited $LiCoO_2$ thin films is confirmed by XRD and Raman analysis. The crystalline $LiCoO_2$ cathode thin film is obtained and $LiCoO_2$ as the interlayer appears to be amorphous. The surface morphology of Cu current collector after cycling of the batteries is observed by AFM. The presence of a 10 nm-thick layer of $LiCoO_2$ at the interface of LiPON / Cu enhances the interfacial adhesion and reduces the interfacial resistance. As a result, Li plating / stripping at the interface of LiPON / Cu during charge/discharge reaction takes place more uniformly on Cu current collector, while without the interlayer of $LiCoO_2$ at the interface of LiPON / Cu, the Li plating / stripping is localized on current collector. The thin film batteries with the interlayer of $LiCoO_2$ at the interface of LiPON / Cu exhibits enhanced initial coulombic efficiency, reversible capacity and cycling stability. The thickness of the anode current collector Cu also appears to be crucial for electrochemical performances of all solid state thin film batteries.

• Steel and Composite Structures
• /
• v.43 no.5
• /
• pp.581-601
• /
• 2022

The main objective of this research work is to investigate the free vibration behavior of annular sandwich plates resting on the Kerr foundation at thermal conditions. This sandwich configuration is composed of two FGM face sheets as coating layer and a porous GPLRC (GPL reinforced composite) core. It is supposed that the GPL nanofillers and the porosity coefficient vary continuously along the core thickness direction. To model closed-cell FG porous material reinforced with GPLs, Halpin-Tsai micromechanical modeling in conjunction with Gaussian-Random field scheme is used, while the Poisson's ratio and density are computed by the rule of mixtures. Besides, the material properties of two FGM face sheets change continuously through the thickness according to the power-law distribution. To capture fundamental frequencies of the annular sandwich plate resting on the Kerr foundation in a thermal environment, the analysis procedure is with the aid of Reddy's shear-deformation plate theory based high-order shear deformation plate theory (HSDT) to derive and solve the equations of motion and boundary conditions. The governing equations together with related boundary conditions are discretized using the generalized differential quadrature (GDQ) method in the spatial domain. Numerical results are compared with those published in the literature to examine the accuracy and validity of the present approach. A parametric solution for temperature variation across the thickness of the sandwich plate is employed taking into account the thermal conductivity, the inhomogeneity parameter, and the sandwich schemes. The numerical results indicate the influence of volume fraction index, GPLs volume fraction, porosity coefficient, three independent coefficients of Kerr elastic foundation, and temperature difference on the free vibration behavior of annular sandwich plate. This study provides essential information to engineers seeking innovative ways to promote composite structures in a practical way.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.405-405
• /
• 2016

CIGS 박막 태양전지에서 완충층으로 사용되는 ZnS는 단파장 영역에서 높은 투과도와 CIGS 계면과의 좋은 접착을 가지고 친환경적이며 3.74eV의 에너지 밴드갭을 가지고 있기 때문에 CdS를 사용했을 때 보다 더 넓은 에너지 영역의 광자를 p-n 접합 경계 영역으로 통과 시킬 수 있고 Cd-free 물질이라는 점에서 기존의 CdS 완충층의 대체 물질로 각광 받고 있다. 본 연구에서는 CIGS 박막에 화학습식공정 방법을 이용하여 최적화된 ZnS 박막의 증착 조건을 찾기 위해 실험 변수인 시약의 농도, 실험온도, 열처리 조건 등의 다양한 변화를 통해 실험을 진행하였고, 박막의 갈라짐과 pin-hole 현상을 개선하고 균일한 막을 제조하기 위해 구연산 나트륨 농도에 따른 ZnS 박막의 특성을 연구하였다. 본 실험 결과로서 실험변수인 황산아연의 농도 0.15M, 암모니아는 0.3M, 티오요소 1M, 공정 온도 $80^{\circ}C$의 최적화 된 조건에서 가장 좋은 품질의 ZnS 박막을 제조하였지만, ZnS 박막의 열처리 후 산소의 양이 줄어감에 따라 박막의 표면이 갈라지고 pin-hole 현상이 발생하는 것을 확인할 수 있었다. 박막의 품질을 개선하기 위해 구연산 나트륨을 첨가하여 실험한 결과 구연산 나트륨의 0.05M의 농도에서는 박막 표면에 90nm의 갈라짐의 크기와 pin-hole 현상이 남아있는 것을 확인하였고, 농도가 높아질수록 점차 크기가 줄어들면서 0.4M에서는 갈라짐이 거의 없는 표면과 pin-hole 현상도 없어지는 것을 확인하였고, 약 144nm의 박막 두께와 3.8eV의 에너지 밴드갭을 가지고, 약 81%의 높은 광투과율을 갖는 고품질의 ZnS 박막을 제작할 수 있었다.