• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12A
• /
• pp.1172-1176
• /
• 2008

In this paper, we describe the implementation and performance of a dual-mode Software Define Radio (SDR) smart antenna base station system. SDR technology enables a communication system to be reconfigured through software downloads to the flexible hardware platform that is implemented using programmable devices such as Digital Signal Processors (DSPs), Field Programmable Gate Arrays (FPGAs), and microprocessors. The presented base station channel card comprises the physical layer (pHY) including the baseband modem as well as the beamforming module. This channel card is designed to support TDD High-Speed Downlink Packet Access (HSDPA) as well as Wireless Broadband Portable Internet (WiBro) utilizing the SDR technology. We first describe the operations and functions required in WiBro and TDD HSDPA. Then, we explain the channel card design procedure and hardware implementation. Finally, we evaluate WiBro and TDD HSDPA performance by simulation and actual channel-card-based processing. Our smart antenna base-station dual-mode channel card shows flexibility and tremendous performance gains in terms of communication capacity and cell coverage.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.2 s.58
• /
• pp.38-49
• /
• 2006

In order to increase the spectrum efficiency, recently, there is the number of studies for CR technology. For instance, IEEE 802.22 WRAN(Wireless Regional Area Network) WG considered the CR technology as a solution of WRAN system to serve the high speed internet service(1.5 Mbps down stream and 384 kbps up stream) in 100 km overall coverage and 54 MHz-746 MHz band. Basically, in MAC point of view, the WRAN system have been standardizing based on the IEEE 802.16 MAC layer features such as Data transmission method, QoS provision and Bandwidth request schemes. Additionally, the WRAN system further include CR nature functions such as incumbent user protection, self coexistence which would be importantly considered. Also, the inherent WRAN functions are added such as channel bonding and fractional bandwidth usage. This paper mainly explained frame structure, IU protection, self coexistence which are key functions of WRAN system. Finally, in this paper, we expressed a prospect of IEEE 802.22 WRAN standardization.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.5
• /
• pp.47-53
• /
• 2007

The purpose of IEEE 802.16j is to extend coverage and to enhance throughput by using relay station additionally to conventional IEEE 802.16e . The cellular system experiences performance degradation at the cell edge due to pathloss, shadow and multipath fading. We can get advantage of spatial diversity gain by using relays more than two cooperatively in the IEEE 802.16j system. Cooperative relaying using space-time code provides better performance under multipath fading and has more robustness against the shadow fading than single relaying. In this paper, we investigate the performance of IEEE 802.16j using cooperative relaying by link level simulation. We also show that the cooperative relaying system achieves better performance than the conventional single relaying system. We apply realistic shadow model considering correlations between shadow fadings of different relaying paths. It is shown that the performance of the system depends highly on the spatial location of relay stations.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.6 s.360
• /
• pp.31-39
• /
• 2007

In this paper, a system for real-time or periodic measurement and analysis of RF parameters such as forward transmit power and pilot power in CDMA base station systems is proposed. Such RF characteristic parameter measurement can be prevented from system fault and used to achieve optimal service quality and maximum investment return through cell coverage expansion, subscriber capacity increase and so on. For forward power measurement, the local oscillator frequency for the detector is varied so that the transmit power for all channels can be measured. The channel power measurement can be used to analyze the variation in transmit power for changes in voice traffic. By comparing to forward $E_c/I_o$, the pilot channel power can be deducted, which can be used to determine uy degradation in transmit section modules such as the high dover amplifier. Since an accurate analysis of carefully measured data using the CDMA level detector must be made, the system is designed so that measurement errors due to changes in crest factor with modulation method can be overcome.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11A
• /
• pp.891-897
• /
• 2009

In the satellite communications, the frequency sharing with other services is important because the service coverage is generally very wide and overlaps with those of other wireless services. This paper introduces a new technique to mitigate interference into the terrestrial stations from the Earth station in the same frequency band by means of band segmentations which are portions of the overall operation frequency band divided by frequency reuse factor. We consider a multi-beam satellite system, where frequency bands are reused in each satellite cell. The terrestrial stations use band segmentations of adjacent satellite cells, and this may decrease the interferences. By this way, the terrestrial and satellite systems can share the same frequency bands efficiently. The simulation is performed at frequency reuse factors, seven and three. The simulation results show that the proposed method can highly reduce the interference level to -168 dBW or -163 dBW depending on the considered frequency reuse factor from -117 dBW at the 90% link availability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.9
• /
• pp.764-774
• /
• 2013

The number of users and data packets has increased in 4G cellular networks. Therefore, 4G cellular network providers suffer from the network capacity problem. In order to solve this problem, femtocell concept is suggested. It can reduce the coverage hole and enhance the QoS. However, only small number of femtocells experience the large amount of loads. To solve this problem, Mobility Load Balancing (MLB) algorithm is suggested, which is a kind of load balancing algorithm. To distribute the traffic load, MLB algorithm modifies the handover region. If the handover region is reduced by MLB algorithm, some cell edge users are compulsively handed over to neighbor femtocell. In this paper, we analyze the relation between MLB performing period and performance indicators. For example throughput and blocking probability is reduced, if period is decreased. On the contrast, if period is increased, the number of handover frequency is decreased. Using this relation, we suggest the adaptive periodic MLB algorithm. This algorithm includes the advantage of both long period and short period MLB algorithm, such as high throughput, the small number of handover frequency, and low blocking probability.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.7
• /
• pp.1900-1906
• /
• 1997

In this paper, the efficient BILBO(named EBILBO) is designed for BIST that is able to batch the testing when circuit is designed on FPGA. The proposed algorithm of batch testing is able to test the normal operation speed with one-pin-count that can control all part of large and complex circuit. PRTPG is used for the test pattern and MISR is used for PSA. The proposed algorithm of batch testing is VHDL coding on behavioral description, so it is easily modified the model of test pattern generation, signature analysis and compression. The EBILBO's area and the performance of designed BIST are evaluated with ISCAS89 benchmark circuit on FPGA. In circuit with above 600 cells, it is shown that area is reduced below 30%, test pattern is flexibly generated about 500K and the fault coverage is from 88.3% to 100%. EBILBO for the proposed batch testing BIST is able to execute concurrently normal and test mode operation in real time to the number of $s+n+(2^s/2^p-1)$ clock(where, in CUT, # of PI;n, # of register, p is order # of polynomial). The proposed algorithm coded with VHDL is made of library, then it well be widely applied to DFT that satisfy the design and test field on sme time.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.6
• /
• pp.1069-1078
• /
• 2001

Pattern grading is a technique used to increase or decrease the size of a garment pattern according to the measurements in a given size chart. The original pattern is graded and laid out for cutting before mass production. This study tried to classify body types for pattern grading of jacket by applying a concept of "drop"defined as the difference between chest girth and waist girth and the difference between hip girth and waist girth for pants. Data were collected through the stratified sampling method. 138 subjects were selected out of 1,290 subjects of our sample population. Findings were as follows : 1) For pattern grading of jacket, the cell with the chest girth of 96cm and the waist girth of 87cm had the highest frequency rate and body type was 87H type and the coverage of this type was 9.52%. Then, the size specification 87-96 was the center of distribution. H type had seven ones such as 72H, 75H, 78H, 81H, 84H. 87H and 90H. H type had 33 observations and frequency ratio of 26.19%. Same types could be graded up and down from the reference size for the age group. And this reference size became to the starting point for developing the grading system. 2) For pattern grading of pants, fatty types, H10 type had six ones such as 80H10. 82H10, 84H10, 86H10, 88H10 and 90H10. H10 type had 28 observations and frequency ratio of 20.29%. H6 type had 6 ones such as 84H6, 86H6, 88H6, 90H6. 92H6 and 94H6. H6 type had 27 observations and frequency ratio of 19.57%. If lower body types were classified as same ones, these types could be graded up and down proportionately.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.632-636
• /
• 2006

It is needed to use the beam scanning to control the cell coverage of the base station considering operation conditions, season, time period, radiation character and mobility of customers and vehicles for varied wireless communication service and quality improvement. This paper proposes a mobile antenna system which can obtain the characteristics of the beam scanning by controlling the directivity depending on the operation condition. Radiation block is made of 2 sub-array of $1\times3$ patched antennas for ITS of 5.8GHZ bandwidth with the gain of 13dBi, and of 2 sub-array of single patched antenna for WiBro of 2.3GHZ bandwidth with the gain of 12dBi. RF module is made of a switch, an amplifier, a PAD, a 3-Bit phase shifter, and a power divider. The system is able to control the beam tilting with electronic methode by using 3-bit phase shifter$(45^{\circ},\;90^{\circ},\;180^{\circ})$.

• Archives of Plastic Surgery
• /
• v.38 no.5
• /
• pp.687-690
• /
• 2011

Purpose: Pemphigus vulgaris, a rare autoimmune blistering disease of the skin and mucous membranes remains a challenging disease to treat. Management is focused on immunotherapy against autoimmune antibodies that target keratinocyte cell adhesion molecules, and antibiotics preventing secondary infections. There is no established dressing protocol and skin is usually manipulated the least amount possible in order to minimize irritation. The authors suggest that early initiation of aggressive bathing and debridement of skin lesions, with nutritional support, is essential in accelerating resolution. Methods: A 40 year-old male previously diagnosed with pemphigus vulgaris was admitted due to exacerbation of mucocutaneous lesions involving the epidermis and mucosa of the whole body. Steroids, immunosuppressants, intravenous immunoglobulin and antibiotics were administrated, but infection and de-epithelialization progressed, while his general condition deteriorated with a weight loss of over 20 kilograms. The plastic surgery department intervened with daily bathing, debridement of unhealthy debris and non-traumatizing coverage of growing epithelium. Total parenteral nutrition and mobilization with rehabilitation therapy was initiated as early as possible. Results: After bathing, healthy epithelium gradually covered the patient's entire body, while his general condition improved with a corresponding weight gain of 14 kgs. Conclusion: Treatment of pemphigus vulgaris focuses on immunotherapy and infection control. However, an equal amount of attention should be laid on early intervention with daily dressings including bathing and irrigation, nutritional support, and exercise as this accelerates resolution of existing infections, promotes healthy epithelialization and leads to faster recovery.