• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.12 s.243
• /
• pp.1615-1620
• /
• 2005

We present a novel flow-rate independent cell counter using a fixed control volume between double electrical sensing zones. The previous device based on the single electrical cell sensing in a given flow-rate requires an accurate fluid volume measurement or precision flow rate control. The present cell counter, however, offers the flow-rate independent method for the cell concentration measurement with counting cells in a fixed control volume of $22.9{\pm}0.98{\mu}{\ell}$. In the experimental study, using the RBC (Red Blood Cell), we have compared the measured RBC concentrations from the fabricated devices with those from Hemacytometer. The previous and present devices show the maximum errors of $20.3\%\;and\;16.1\%$, which are in the measurement error range of Hemacytometer (about $20\%$). The present device also shows the flow-rate independent performance at the constant flow-rates ($5{\mu}{\ell}/min$ and $10{\mu}{\ell}/min$) and the varying flow-rate (4, 2, and $4{\mu}{\ell}/min$). Therefore, we demonstrate that the present cell counter is a simple and automated method for the cell concentration measurement without requiring an accurate fluid measurement and precision flow-rate control.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.339-342
• /
• 1998

The various services that a broadband integrated services digital network (B-ISDN) carries, have a wide range of delay, delay jitter and cell loss probability requirements. Design of appropriate control schemes for B-ISDN is an extremely important and challenging problem. In this paper, we proposes a priority control scheme with a delay counter and a cell counter per each class type. The priority control for required service quality is performed with delay/loss factor obstained by comparing window counter with cell counter. The performance of proposed control scheme is estimated by computer simulation.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.428-430
• /
• 2008

Dye-sensitized solar cell has many internal resistant components such as Pt counter electrode, $TiO_2$/dye/electrolyte, charge diffusion, sheet resistance of TCO. Among these, the resistance about the counter electrode can be reduced by increasing the roughness factor of Pt counter electrode. This causes the increase of fill factor and improvement of efficiency. And the amount of light reflection on the counter electrode also increases as the roughness factor goes up. In our experiment, we suggest a new deposition structure of Pt thin film that is a stepped-type structure. The more step lines are in the counter electrode, the more roughness factor is. As a result, we get the improvement of fill factor and efficiency by controlling the roughness factor of counter electrode.

• Korean Journal of Veterinary Service
• /
• v.16 no.1
• /
• pp.1-10
• /
• 1993

Samples of bulk herd milk, foremilk, last milk (stripping) and individual cow sample were collected and their somatic cell number were counted with Fossomatic counter (FCC), Coulter counter(CC), direct microscopic somatic cell count(DMSCC) and Califormia mastitis test (CMT), The results were compared and summarized as follows : 1. Mean somatic cell counts of 120 bulk herd milk samples obtained by DMSCC, FCC and CC were 433,203, 481,213 and 676,245 respectively. 2. Mean somatic cell counts of 116 foremilk samples obtained by DMSCC, FCC and CC were 515,035, 611,845 and 725,051 respectively 3. Mean somatic cell counts of 87 last milk samples obtained by DMSCC, FCC and CC were 718,506, 839,874 and 1,041,160 respectively. 4. Mean somatic cell counts of 57 individual cow samples obtained by DMSCC, FCC and CC were 449,258, 491,018 and 521,315 respectively. 5. Mean somatic cell counts of all samples increased with the increasing CMT score, and the cell counts were higher by CC than by FCC. 6. The correlation coefficients between the somatic cell counts by CMT and CC were 0.926 in bulk herd milk, 0.707 in foremilk 0.688 in last milk and 0.675 in individual cow sample, respectively 7. The correlation coefficients between the somatic cell counts by CMT and FCC were 0. 945 in bulk herd milk, 0.705 in foremilk 0.694 in last milk and 0.727 in individual cow sample, respectively. 8. The correlation coefficients between the somatic cell counts by CC and FCC were 0.978 in bulk herd milk, 0.997 in foremilk 0.983 in last milk and 0.985 in individual cow sample, respectively.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.131-133
• /
• 2008

A serious problem of the 21st century is the supply of energy resources. Reserves of fossil fuels are facing depletion: renewable energy resources must be developed in this era. Dye sensitized solar cell (DSC) has been very economical and easy method to convert solar energy to electricity. Recently a novel tandem cell structure is proposed to improve photocurrent of DSC. To fabricated a tandem cell, the mesh structure of counter electrode is essential for the improvement in transmittance. In this study, we conducted the experiment to get the characteristic of DSC with mesh counter electrode. Under the standard test condition (AM 1.5, 100mW/$cm^2$), we obtained the maximum efficiency of 3.41% and the transmittance of 72% in the DSC with mesh counter electrode.

• ETRI Journal
• /
• v.37 no.6
• /
• pp.1087-1095
• /
• 2015

Mobility management is important in mobile cellular networks. In this study, we considered an enhanced location-based registration (ELR) method. In the ELR method, even when a mobile phone enters a cell to find that the cell is already on its list (of visited cells) and then updates its main counter, it does not remove any cells from the list (memory space permitting), which gives better performance than the location-based registration (LR) method. However, the location registration cost of the ELR method is still high, and there is a lot of room for improvement with regards to this matter. We now propose an improved version of the ELR method; namely, the improved ELR (iELR). In the iELR method, when a mobile phone enters a cell to find that the cell counter value is less than the main counter value, or when a mobile phone enters a cell to register its location, it updates the main counter and the cell counter values as much as possible to reduce the future need for registrations. We show that our proposed iELR method provides better performance than the ELR method.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.05a
• /
• pp.405-408
• /
• 2006

Design of appropriate control schemes that can satisfy the cell loss, delay requirements with various traffic specification for B-ISDN is an extremely important challenging problem. In this paper, we proposes a priority control scheme with a window counter and a cell counter per each type of class. The priority control for satisfying required service quality is performed with delay/loss factor obtained by comparing window counter with cell counter. The performance of proposed control scheme is estimated by computer simulation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.10
• /
• pp.1090-1094
• /
• 2004

Studies on porous oxide electrode, dye and electrolyte for dye-sensitized solar cells have been intensively carried out until now. However, counter electrode have not been much studied so far. Accordingly, it is needed to investigate new counter electrode materials with superior catalyst property and to substitute for Pt electrode. In this case, carbon nano-tubes (CNTs) are one of alternatives for counter electrodes as following merits: low resistivity, excellent electron emission property, large surface area and low cost due to development of mass production technique. Such advantages gave us to select multiwalled CNTs (MWCNT) as counter electrode for dye-sensitized solar cell. Also, cyclic voltammetry and impedance spectroscopy were used to investigate electrochemical properties of both CNT electrode and Pt electrode. It was found that sheet resistance of CNT electrode was similar to that of Pt electrode, also, electrochemical properties of CNT electrode was superior to that of Pt electrode on the basis on the measurement of CV and impedance spectrum. It was found that CNT is likely to be a very promising electrode material for dye solar cells.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.335-338
• /
• 2007

Cost effectiveness is an important parameter for producing DSSCs as compared to the widely used conventional silicon based solar cells. A fluorine-doped tin oxide (FTO) substrate coated with a catalytic amount of platinum is used as counter electrode in dye-sensitized solar cell. Carbonaceous materials are quite attractive to replace platinum due to their high electronic conductivity, corrosion resistance towards $I_{2}$, good catalytic effect and low cost. In this paper, the unit DSSCs with Pt and CNT as a counter electrode were connected in series-parallel externally, then the current-voltage curves were investigated to find out the connection characteristics of the DSSC with CNT counter electrode. The connection characteristics of the DSSC with CNT counter electrode is superior to that of the DSSC with Pt counter electrode. And a parallel connection of the DSSC with CNT counter electrode has higher efficiency than a series connection of that.

• The Journal of the Korea Contents Association
• /
• v.6 no.3
• /
• pp.1-11
• /
• 2006

With the improvement of information telecommunication technology, the various service in broadband integrated services digital networks have a wide range of delay, delay jitter and cell loss probability requirements according to traffic specification. Therefore, the design of appropriate control schemes that can satisfy the cell loss, delay requirements with various traffic specification for B-ISDN is an extremely important challenging problem. In this paper, we propose a priority control scheme using a window counter and a cell counter per each type of class. In the proposed priority control scheme, for satisfying required service quality, we performed the priority control scheme using the delay/loss factors obtained by comparing window counter with cell counter. The performance of proposed control scheme is estimated by computer simulation. In the results of simulation, we verified that the proposed method satisfied per class requirements as the results showed that cell loss probability has a order of video, data, voice and delay time has a order of video, voice and data.