• E2M - 전기 전자와 첨단 소재
• /
• 제9권5호
• /
• pp.476-482
• /
• 1996

The multi-dielectric layer SiO$_{2}$/Si$_{3}$N$_{4}$/SiO$_{2}$(ONO) is used to improve electrical capacitance and to scale down the memory device. In this paper, improvement of the capacitance by reducing the bottom oxide thickness in the nitride deposition with load lock(L/L) vacuum system is studied. Bottom oxide thickness under the nitride layer is measured by ellipsometer both in L/L and non-L/L systems. Both results are in the range of 3-10.angs. and 10-15.angs., respectively, independent of the nitride and top oxide thickness. Effective thickness and cell capacitance for SONOS capacitor are in the range of 50-52.angs. and 35-37fF respectively in the case of nitride 70.angs. in L/L vacuum system. Compared with non-L/L system, the bottom oxide thickness in the case of L/L system decreases while cell capacitance increases about 4 fF. The results obtained in this study are also applicable to ONO scaling in the thin bottom oxide region of memory stacked capacitor.

• 식물조직배양학회지
• /
• 제25권1호
• /
• pp.13-19
• /
• 1998

Electroporation을 이용한 형질전환 연구에서 원형질체 대신 체세포 배발생 세포를 이용하여도 DNA가 도입될 수 있음을 이미 보고한 바 있다. 본 연구는 배발생 세포 내로 DNA를 도입하기 위한 electroporation의 최적 조건, 즉 전압과 capacitance 수준, promoter 종류, DNA 농도, 저온처리효과 등을 구명하며, 처리에 따른 DNA의 전입 현상을 이해하고 전기충격후의 생장과 분화 정도를 조사하고자 수행되었다. 들잔디 미숙배를 2,4-D가 2 mg/L 함유된 MS배지에서 배양하여 배발생 캘러스를 유도하였고, 동일 조성의 액체배지에 진탕배양하여 조직 electroporation에 적합한 현탁배양 세포괴를 증식할 수 있었다. 100-400 V의 전압과 10-1980 $\mu\textrm{F}$의 capacitance 수준에서 세포괴를 35S-gusA 조성을 갖는 운반체 DNA와 함께 electroporation 하였을 때, 전반적으로 DNA가 도입되었음을 표지유전자 gusA의 transient 발현을 통하여 확인하였으며, 200-300 V 전압과 330-800 $\mu\textrm{F}$ capacitance 수준이 보다 효과적인 경향을 보였다. 처리시 온도는 큰 영향을 미치지 않았으며, 6 $\mu\textrm{g}$/mL 이상의 DNA 농도에서는 GUS 발현이 양호하였다. 배발생 캘러스 세포주들은 모두 DNA가 도입 되었으나 비 배발생 캘러스 세포주는 11개중 하나에서만 도입이 확인되었다. Electroporation시 전기충격후 20, 40시간 후에 DNA를 첨가하여도 gusA가 발현됨에 따라 전기충격이 세포막의 침투성을 장시간 변화시킴으로써 DNA가 전이될 수 있는 것임을 확인할 수 있었다. GusA의 promoter로 CaMV 35S외에 Actl과 Ubil의 활성을 비교한 바, 35S에 비해 각각 7배, 5배의 활성을 나타내었다. Electroporation 처리후 세포괴의 배양실험에서 100-400 V의 전압과 10-l980 $\mu\textrm{F}$ capacitance의 전 처리 범위에서 캘러스의 지속적인 생장과 함께 식물체 재분화가 일어났다.

• 전기학회논문지
• /
• 제59권9호
• /
• pp.1626-1631
• /
• 2010

The characteristics of electric current for the voltaic cell are important for electric power applications. In this paper, an electrical equivalent model consist of three resisters and a capacitance for the Cu/NaCl solution/Zn electrochemical cell is proposed. The capacitance which exists in the Zn electrode/electrolytic interface increased according to Zn electrode area, but cannot affect almost in electric current. Complex impedance plot was used to analysis the interface effect for Zn/electrolyte. This result shows that the interface is similar with the electric transmission line. The short current measurements were conducted to investigate the effects of hydrogen peroxide, the watery sulfuric acid and NaCl aqueous solution. As the hydrogen peroxide increased, the electric current increased because the hydrogen gas being converted with the water. Also electric current increased significantly with increase of the hydrogen ion with the watery sulfuric acid and increased with increase of $Na^+$ ion and $Cl^-$ion in the NaCl electrolyte.

• 한국전기전자재료학회논문지
• /
• 제15권2호
• /
• pp.169-172
• /
• 2002

The voltage holding ratio(VHR) and the residual DC property in the in-plane switching (IPS) cells on a polyimide surface was studied. Several IPS cells which have different concentrations of cyano liquid crystals (LCs) were fabricated. We found that the VHR of the IPS cell was decreased with increasing concentration of cyano LCs. Also, the VHR of the IPS cell was increased with increasing specific resistivity of fluorine LCs. The residual DC voltage of the IPS cell by capacitance-voltage (C-V) hysteresis method was decreased with increasing concentration of cyano LCs. The residual DC property of the IPS cell on the rubbed PI surface can be improved by high polarity of cyano LC.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2003년도 추계학술대회
• /
• pp.351-357
• /
• 2003

The optimum polymer gel electrolyte composition ratio was 23 : 66 : 11 wt% of P(VdF-co-HFP) : PVP =20 : 3), (PC: EC =44 : 22) and TEABF$_4$. And the optimal thickness of polymer gel electrolyte was 50 ${\mu}{\textrm}{m}$. The electrochemical characteristics result of unit cell were 31.41 Fig of specific capacitance, and 3.21$\times$10$^{-3}$ S/cm of ion conductivity. Ion conductivity of polymer gel electrolytes decreased according to added PVP through impedance analysis, and it was higher in 7 wt%, but electrochemical characteristics of unit cell were better in 3 wt% PVP. And for excellent ion conductivity of polymer gel electrolytes, the use of a thin layer electrolyte(20 $\mu\textrm{m}$) was an effective method, but with unit cell application, the best thickness was 50 $\mu\textrm{m}$. Unit cell showed higher capacitance and more stable electrochemical performance when hot pressed between polymer gel electrolyte and electrode. This results from enhancement of the physical contact between the electrode and the polymer gel electrolyte and good accessibility of the liquid electrolyte to the electrode surface.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.266-266
• /
• 2009

For the development of hybrid supercapacitor, increasing energy density is one of the most crucial matters. Since the energy density is the function of capacitance and voltage, it is necessary to enhance energy density for increasing capacitance or voltage. For the high working voltage, it was to enforce Li ion free-doping to activated carbon. As a result, initial capacitance has increased by 11% than raw cell. But capacitance has decreased by Li ion re-solution to electrolyte for increase the number of cycle.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제5C권6호
• /
• pp.242-245
• /
• 2005

We compared and analyzed ASER (Accelerated Soft Error Rate) for cell structures and metal plate capacitance in the fabricated 16M SRAM. Application of the BNW (Buried NWELL) lowered the ASER value compared to the normal well structure. By applying the metal plate capacitor with the BNW, the lowest ASER value can be obtained. The thinner oxide thickness of the metal plate capacitor provides higher capacitance and lower ASER value. The ASER is improved from 2200 FIT to 1000 FIT after sole application of the BNW. However, it is dramatically improved to 15 FIT once the metal plate capacitor is additionally applied.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
• /
• pp.549-552
• /
• 1987

TO INCREASE THE CELL CAPACITANCE Of SMALL GEOMETRY DRAMS. HIGH DIELECTRIC MATERIAL HAS BEEN USED RECENTLY. THE PURPOSE Of THIS WORK IS TO INVESTIGATE THE STRUCTURAL AND ELECTRICAL CHARACTERISTICS Of SiO2/Si3N4/SiO2 STACKED FILM UTILIZING HIGH DIELECTRIC MATERIAL Si3N4(${\epsilon}=7.5$). IN RESULT, THE DIELECTRIC CONSTANT Of STACKED FILM IS 4.0 - 5.0 AND CAPACITANCE AND BREAKDOWN FIELD WERE MORE INCREASED THAN THOSE Of SiO2 FILM.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.257-266
• /
• 2018

Here, a controlled green synthesis route involving hydrothermal pre-carbonization cum pyrolysis is reported that converts cucumber into graphene-like carbon nanosheets for supercapacitor application. Transmission electron microscopy analysis reveals the formation of ultra-thin carbon nanosheets with distributed pores. This cucumber derived carbon exhibits high specific capacitance of $143F\;g^{-1}$ in aqueous electrolyte. The two-electrode symmetric cell exhibits a specific capacitance of $58F\;g^{-1}$ at high current density, and high capacitance retention of 97% after 1000 cycles. This simple low-cost process involving widely available cucumber as biomass precursor is a promising, commercially viable approach for developing high-performance supercapacitors.

• 한국자기학회지
• /
• 제12권2호
• /
• pp.68-72
• /
• 2002

본 연구에서는 터널링 자기저항 소자에서 절연층을 중심으로한 접합면의 정전 용량이 이를 메모리 소자로 사용하였을 때 접근시간에 미치는 영향을 알아보았다. 여기에서 얻어진 결과는 자장을 인가하지 않고 전기적 신호만을 입력하여 측정하였다. 이를 위해 시편에 1 MHz의 양극성 구형파를 인가하고 응답 파형을 오실로스코프로 관찰하여 시정수를 계산하였다. 그리고 각 cell의 접합면 면적에 따라 시정수를 비교하였다. 이렇게 측정된 시정수와 시편에서 각 부분의 전기적 저항 측정자료들을 기초로 전기 패드 리드 그리고 접합면과 같은 시편의 각 부위가 전기적 회로로 모델링 되었다. 그 결과 200$\mu\textrm{m}$$\times$200$\mu\textrm{m}$ cell에서 약 90 pF의 접합면 정전용량이 존재함을 유추할 수 있었다. 또한 모델링 결과와 실제 측정한 결과를 서로 비교하여 그 특성이 매우 유사함을 보였다.