• The Transactions of the Korea Information Processing Society
• /
• v.7 no.4
• /
• pp.1246-1264
• /
• 2000

An input-output buffering switch operates in either of tow different cell loss modes; Backpressure mode and Queueloss mode. In the previous studies, the Backpressrue mode is more effective at low traffic loads, and the Queueloss mode performs better at high traffic. We propose a new operation mode, called Hybrid mode, which adopts the advantages of he Backpressure and the Queueloss mode. Backpressure and Queueloss modes are distinguished from whether a cell loss occurs at the output buffer or not when output buffer overflows, irrespective of input buffer status. In order to simply combine Backpressure and Queueloss mode, the change of input traffic load must be measured. However, in the Hybrid mode, simply both of the input and output buffer overflow and checked out to determine the cell discard. The performance of the Hybrid mode is compared with those of the Backpressure and the Queueloss mode under random and bursty traffic. This paper show that the Hybrid mode always gives the best performance results for most ranges of load values.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.22 no.2
• /
• pp.139-151
• /
• 1997

An ATM switching system may be designed so that communications between processors of its control part can be performed via its switching network rather than a separate inter-processor communications (IPC) network. In such a system, there should be interfaces to convent IPC traffic from message format to cell format and vice versa, that is, mechanisms to perform the SAR (Segmentation And Reassembly) sublayer functions. In this paper, we concern the cell reassembly mechanism among them, mainly focussed on buffer management schemes. We consider a few alternatives to implement cell reassembly function block, namely, separated buffering, reserved buffering and shared buffering in this paper. In case of separated and reserved buffering, we employ a continuous time Markov chain for the performance evaluation of cell reassembly mechanism, judicially defining the states of the mechanism. Performance measures such as measage loss probability, mean number of message queued in buffer and average reassembly delay are obtianed in closed forms. In case of shared buffering, we compare the alternatives for implementing cell reassembly function block using simulation because it is almost impossible to analyze the mechanism of shared buffering by analytical modeling. Some illustrations are given for the performance analysis of the alternatives to implement cell reassembly function block.

• Journal of the Korean Electrochemical Society
• /
• v.14 no.4
• /
• pp.225-230
• /
• 2011

CIGS solar cells are kind of thin film solar cells, which are studied several years. CdS buffer layer that makes heterojunction between window layer and absorbing layer was one of issue in the CIGS solar cell study. New types of buffer layer consisted of indium sulfide are being studied these days owing to high price and environmental harmful of CdS. In this study, we demonstrated electrochemical synthesis of indium sulfide film as a buffer layer, which is cheaper and faster than other methods. A uniform indium sulfide film was obtained by applying two different alternating potentials. The band gap of the film was optimized by controlling temperature during the electrochemical synthesis. Using x-ray photoelectron spectroscopy and diffraction method we confirmed that ${\beta}$-indium sulfide was formed on ITO electrode surface.

• Korean Journal of Materials Research
• /
• v.21 no.8
• /
• pp.432-438
• /
• 2011

In this study, chemical bath deposited (CBD) indium sulfide buffer layers were investigated as a possible substitution for the cadmium sulfide buffer layer in CIGS thin film solar cells. The performance of the $In_2S_3$/CIGS solar cell dramatically improved when the films were annealed at $300^{\circ}C$ in inert gas after the buffer layer was grown on the CIGS film. The thickness of the indium sulfide buffer layer was 80 nm, but decreased to 60 nm after annealing. From the X-ray photoelectron spectroscopy it was found that the chemical composition of the layer changed to indium oxide and indium sulfide from the as-deposited indium hydroxide and sulfate states. Furthermore, the overall atomic concentration of the oxygen in the buffer layer decreased because deoxidation occurred during annealing. In addition, an In-thin layer was inserted between the indium sulfide buffer and CIGS in order to modify the $In_2S_3$/CIGS interface. The $In_2S_3$/CIGS solar cell with the In interlayer showed improved photovoltaic properties in the $J_{sc}$ and FF values. Furthermore, the $In_2S_3$/CIGS solar cells showed higher quantum efficiency in the short wavelength region. However, the quantum efficiency in the long wavelength region was still poor due to the thick buffer layer.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.99-102
• /
• 1998

As multimedia communication services have been widely spreading, the amount of video traffic is rapidly increasing in B-ISDN environment based on the ATM technology. The image quality of MPEG services is very sensitive to the cell losses in ATM network, since each cell contains information needed at decoding process. Since the number of cells in each frame of MPEG is variable, this video smoothing technology need to prepare a buffer for no overflow or underflow at the transmission, requires that some number of cells be taken to the buffer in client before the playback of video. To ensure the high quality image of video, the video smoothing is scheduled by a Group of Picture unit. In this paper, we then apply the theory to reds nightmare encoded in MPEG, and find minimum smoothing buffer size, initial buffer size. It can be used to study the smoothing of stored video.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.435-444
• /
• 1995

We propose a new approach to the calculation of the exact cells loss probability in a shared buffer ATM multiplexer, which is loaded with homogeneous discrete-time ON-OFF sources. Renewal cycles are identified in regard to the state of input sources and the buffer state on each renewal circle is modelled as a K(shared buffer size)-state Markov chain. We also analyze the behavior of queue build-up at the shared buffer whose distribution together with the steady-state probabilities of the Markov chain leads to the exact cell loss probability. Our approach to obtaining the exact cell loss probability seems to be more efficient than most of other existing ones since our underlying Markov chain has less number of states.

• Current Applied Physics
• /
• v.18 no.12
• /
• pp.1592-1599
• /
• 2018

The present study deals with the effect of dual cathode buffer layer (CBL) on the performance of bilayer of 4,4'-cyclohexylidenebis[N,N-bis(4-methylphenyl)benzenamine] (TAPC) and fullerene (C70)-based organic solar cell (OSC) with low donor concentration. OSC devices with CBLs have been fabricated using thermal vapor deposition technique. We report the use of lithium fluoride (LiF) and molybdenum trioxide ($MoO_3$) as CBLs. The insertion of LiF between C70 and aluminium (Al) electrode enhances the power conversion efficiency (PCE) of device from 1.89% to 2.47% but quenching of photogenerated excitons is observed at interface of C70 and LiF layers. Incorporation of $MoO_3$ between LiF and Al electrode further enhances PCE of device to 3.51%. This has also improved the material quality and device properties, by preventing the formation of gap states and diminishing exciton quenching.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.9B
• /
• pp.751-759
• /
• 2003

We analyze the performances, such as the cell loss probability(CLR) and the cell delay time, of time division multiplexed(TDM) optical output buffers using traveling delay lines or delay-line loops for buffering. Since traveling delay lines used for buffering are superior over delay-line loops in terms of simplicity and signal quality, they were used in a conventional TDM optical output buffer. However, the latter is more flexible than the former in that the cell storage time is adjustable by changing the recirculating times of a cell in the loops. So we propose a novel TDM optical output buffer using delay-line loops for buffering. We show that the proposed TDM optical output buffer can reduce the number of buffering unit required to achieve a CLR of less than 10$^{-9}$ . When the number of buffering unit is sufficiently large, we show that both TDM optical output buffers have same cell delay time characteristic.

• The KIPS Transactions:PartC
• /
• v.8C no.1
• /
• pp.88-96
• /
• 2001

Future mobile communication networks, which consist of ATM-based B-ISDN backbone networks and wireless ATM networks, will provide u user with broadband connection and QoS service. These network systems need the lossless handoff methods which support user mobility, satisfy ATM features such as ATM cell ordering and no ATM cell duplication and minimize buffer requirement for ATM cell buffering. In this paper we suggest a multicast-based handoff method to supp$\alpha$t lossless connection as well as to minimize buffer overhead. It establishes a dynamic multicast connection between source terminal and wireless member AP (access point)s. When the mobile terminal receives data packet correctly, it notifies the positive acknowledgement of the packet to all member APs. And member APs then release the MT related temporary buffer space for MT's future movement. Therefore member APs can eliminate unnecessary buffer usage and manage the buffer space efficiently. Analysis result shows that our handoff method has better performance in buffer requirement for lossless and seamless connection services over VCT (virtual connection tree) method and other dynamic multicast-based handoff methods.

• Korean Journal of Microbiology
• /
• v.47 no.2
• /
• pp.117-123
• /
• 2011

The purpose of this study was to evaluate and compare different elution and concentration methods for optimization of human rotavirus (HRV) detection method using real-time RT-PCR and cell culture techniques. The leafy vegetable samples (lettuce, Chinese cabbage) were artificially inoculated with HRV. Viruses were extracted from the vegetables by two different elution buffers, buffer A (100 mM Tris-HCl, 50 mM glycine, 3% beef extract, pH 9.5) and buffer B (250 mM Threonine, 300 mM NaCl, pH 9.5), and the extracted viruses were concentrated by filtration and PEG precipitation sequentially. To determine infectivity of the viruses, the viruses recovered from the samples were infected to the MA-104 cells, and integrated cell culture real-time RT-PCR was performed at 1, 48, 72, 96, 120, 144, 168 h post-infection (p.i.). The elution buffer A was more efficient in extracting the virus from the produce samples tested than the buffer B, 29.54% and 18.32% of recoveries, respectively. The sensitivity of real-time RT-PCR method was markedly improved when the virus was concentrated by the filtration method. When the viruses were eluted and concentrated by buffer A and filtration, respectively, the average recovery rate was approximately 51.89%. When the viruses recovered from samples were infected to MA-104 cell, infectious HRV was detected within 48 h p.i. by ICC/real-time RT-PCR, whereas cytopathic effects were not observed until 72 h p.i. The optimized detection method evaluated in this study could be useful for rapid and reliable detection of HRV in fresh produce products and applied for detection of other food-borne viruses.