• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.3
• /
• pp.1721-1724
• /
• 2013

Objective: To investigate the effect of epirubicin on soluble CD25 (sCD25) secretion by CD4+CD25+ regulatory T (Treg) cells isolated from diffuse large B-cell lymphoma (DLBCL) patients. Methods: Treg cells were isolated from the peripheral blood mononuclear cells isolated from the newly diagnosed DBLCL patients. The concentration of sCD25 in the supernatant was determined with a commercial sCD25 (IL-2R) enzyme-linked immunosorbent assay (ELISA) kit. The fluorescence intensity of CD25 was detected by flow cytometry. Results: Cell survival rate was significantly decreased along with the increase of epirubicin concentration after treatment for 24 h. There was also a significant difference in the concentration of sCD25 between the epirubicin group and the control group (P<0.01). A positive correlation between the Treg cells survival rate and the concentration of sCD25 was detected (r=0.993, P<0.01). When equal numbers of CD4+CD25+ Treg cells of the epirubicin group and the control group were cultured for another 24 h without epirubicin the CD25 fluorescence intensity on the surface of Treg cells was obviously higher in the epirubicin group than that in the control group (P<0.01), while the sCD25 concentration in the supernatant in the epirubicin group was significantly lower than that in the control group (P<0.05). Conclusion: Epirubicin may improve the body's immune functions by inhibiting the sCD25 secretion by Treg cells in DLBCL patients.

• Applied Chemistry for Engineering
• /
• v.30 no.4
• /
• pp.429-434
• /
• 2019

A lateral flow immunoassay platform utilizing antibody functionalized water soluble CdSe/ZnS semiconductor quantum dots (QDs) was developed for the analysis of human serum amyloid A-1 (hSAA1) in a buffer solution. hSAA1 was chosen as a target protein because it is regarded as a potential biomarker associated with early diagnosis and prognosis in patients of lung cancer. The immunoassay strip on a nitrocellulose membrane was fabricated by spraying two lines composed of a test line with a monoclonal antibody against hSAA1 (10G1) (anti hSAA1) and a control line of anti-chicken IgY. While the CdSe/ZnS QDs synthesized in an organic phase were transferred to a water phase by ligand exchange using carboxylic acid modified alkane thiol. The QDs was then conjugated to monoclonal antibody against hSAA1 (14F8) [anti hSAA1 (14F8)] and used as a fluorescent detection probe. The sequential lateral flow of hSAA1 in different concentration and QDs-anti hSAA1 (14F8) complex allowed to form the surface sandwich complex of anti hSAA1 (10G1)/hSAA1/QD-anti hSAA1 (14F8), which was then analyzed using fluorescence microscope. A 100 nM concentration of hSAA1 protein can be detected by naked eyes under an optimized lateral flow buffer condition with a sensing time of 5 mins.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.200-202
• /
• 1987

Sintered CdS films on glass substrate with low electrical resistivity and high optical transmittance have been prepared by coating and sintering method. All-polycrystalline CdS/CdTe solar cells with different microstructure and properties of CdTe layer were fabricated by coating a number of CdTe slurries, which consisted of Cd and Te powders, an appropriate amount of propylene glycol and 2 or 7.5 w/o $CdC1_2$, on the sintered CdS films and by sintering the glass-CdS-(Cd+Te) composites at various temperature. To explore the dependence of the solar efficiency on the preparation conditions of the CdTe layer, Cd powder with an average particle size of $0.3{\mu}m$ or $5{\mu}m$ was prepared. The use of Cd with finer particles forms more dense or uniform microstructure of the nuclear of CdTe during the heating. Therefore the use of Cd with finer particles improves the efficiency of the sintered CdS/CdTe solar cell by improving the microstructure of sintered CdTe layer. But the difference of solar efficiency by varing a particle size of Cd is decreased with increasing amount of $CdC1_2$ in the (Cd+Te) layer. All-polycrystalline CdS/CdTe solar cells with an efficiency of 10.2% under solar irradiation have been fabricated using a Cd with finer particles.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.481-481
• /
• 2013

Chemical bath deposition (CBD) 기술에 의해 slide glass 기판 위에 CdS 박막을 적층 형성하였다. 적층된 박막들은 CdCl2와 thiorea (H2NCSNH2)를 증류수와 혼합 시dipping의 온도 조건, pH 조건, 시간 및 횟수를 달리하여 균일한 표면이 형성되도록 하였다. 적층된 박막은 $200^{\circ}C$ 이상의 고온에서 annealing하여 결정화하였다. 적층한 박막은 결정화 요인들을 XRD, FE-SEM, AFM, EDX, UV-Vis spectroscopy를 통해 조사하였다. 형성된 박막은 포토레지스터로 활용될 가능성을 조사하였다.

• Current Photovoltaic Research
• /
• v.7 no.2
• /
• pp.33-37
• /
• 2019

In this paper, we compared the performance of $Cu(In,Ga)(S,Se)_2$ (CIGSSe) thin film solar cell with CdS buffer layer deposited by irradiating 365 nm UV light with 8 W power in Chemcial Bath Deposition (CBD) process. The effects of UV light irradiation on the thin film deposition mechanism during CBD-CdS thin film deposition were investigated through chemical and electro-optical studies. If the UV light is irradiated during the solution process, the hydrolysis of Thiourea is promoted even during the same time, thereby inhibiting the formation of the intermediate products developed in the reaction pathway and decreasing the pH of the solution. As a result, it is suggested that the efficiency of the CdS/CIGSSe solar cell is increased because the ratio of the S element in the CdS thin film increases and the proportion of the O element decreases. This is a very simple and effective approach to control the S/O ratio of the CdS thin film by the CBD process without artificially controlling the process temperature, solution pH or concentration.

• 한국전기화학회:학술대회논문집
• /
• 2005.07a
• /
• pp.169-172
• /
• 2005

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05b
• /
• pp.39-42
• /
• 2002

There is a renewed interest in the application of photoconductors especially Cd(Zn)Te to x-ray imaging. In this paper, We investigate effects on x-ray detection characteristic of Zn dopped CdTe detector. Cd(Zn)Te film was fabricated by vacuum thermal evaporation method and then investigate physical analysis using EPMA and XRD. We investigated the leakage current and X-ray photosensitivity as applied voltage about fabricated Cd(Zn)Te film. Experimental results showed that the increase of Zn dopped concentration in $Cd_{1-x}Zn_{x}Te$ detector reduced a leakage current and improved a signal to noise ratio significantly.

• The Korean Journal of Ceramics
• /
• v.3 no.1
• /
• pp.57-61
• /
• 1997

The effects of pH of solution on structural, electrical, and optical properties of CdS thin films prepared by solution growth method were investigated. With increasing pH of the solution, both crystallinity and transmittance of CdS thin film were deteriorated due to impurities and CdS particles, which were produced by homogeneous nucleation and adsorbed on the surface of CdS thin films. The films were strongly adherent to substrates and has low resistivity of 10~$10^2{\omega}cm$ regrardless of deposition conditions. After annealing at 30$0^{\circ}C$ in Ar atmosphere, the resistivity decreased due to desorption of impurity ions as well as the formation of S vacancies, but after annealing above 35$0^{\circ}C$ it increased by an agglomeration of S vacancies. After annealing in air atmosphere, the film resistivity increased because of the formation of oxide particle in grain boundaries.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.248-250
• /
• 1987

Transparent CdS films with low electrical restivity on glass substrates were prepared by coating a CdS slurry which contained 10 wt.% $CdCl_2$, and sintering in a nitrogen atmosphere at $600^{\circ}C$ for 2hr. All-polycrystalline CdS/CdTe solar cells were fabricated by coating CdTe slurries, which contained 1.0 or 4.5 wt.% $CdCl_2$, on the sintered CdS films and sintering at $700^{\circ}C$ for various periods of sintering. The spectral responses of the sintered CdS/CdTe solar cells were measured and compared with theoretically calculated quantum efficiency. The spectral responses of the sintered CdS/CdTe solar cells in the short-wavelength region decreases with-increasing sintering time. The poor response in this region is attributed to the existence of the Cd-S-Te solid solution in the compositional junction. The decrease in the maximum response in the long-wavelength region as the sintering exceeds certain time appears to be caused by the increase in the depth of the buried homo junction and by the increase in the series resistance. The $CdCl_2$ in the CdTe layer during sintering enchances the interdiffusion of S, Te or donor impurities across the metallurgical Junction causing the formation of deeper n-p junction in the CdTe layer.

• Archives of Pharmacal Research
• /
• v.27 no.8
• /
• pp.873-877
• /
• 2004

This study was designed to determine the optimum conditions of three different factors (mixing time, mixing temperature, and tube size) in reduction of cholesterol in milk using immobilized $\beta$-CD beads. Immobilized $\beta$-CD glass beads were prepared at different conditions of silaniza-tion and $\beta$-CD immobilization reactions. In result, the glass beads (diameter 1 mm) at 20 mM 3-isocyanatopropyltriethoxysilane and 30 mM $\beta$-CD without base showed the highest choles-terol removal rate as 41%. Using above immobilized $\beta$-CD glass beads, the cholesterol removal rate was 40.2% with 6 h of mixing time in 7 mm diameter tube at $10^{\circ}C$. After choles-terol removal from milk, the glass beads were washed for cholesterol dissociation and reused. In recycling study, the cholesterol removal rate was 41%, which was mostly same as that using new glass beads. These results indicated that cholesterol removal rate was about 40% with $\beta$-CD immobilized glass beads, however, the recycling efficiency was almost 100%.