• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.9
• /
• pp.151-157
• /
• 2000

Stress intensity factors for the circumferential surface crack of a long composite cylinder under torsion is investigated. The problem is formulated as a singular integral equation of the first kind with a Cauchy type kernel using the integral transform technique. The mode III stress intensity factors at the crack tips are presented when (a) the inner crack tip is away from the interface and (b) the inner crack tip is at the interface.

• Journal of Ocean Engineering and Technology
• /
• v.16 no.3
• /
• pp.34-39
• /
• 2002

본 논문에서는 수면파(Surface wave)와 수중파 (Internal wave)간의 동적 상관관계에 관하여 수행된 연구결과를 정리하였다. 표면파의 비선형 문제는 파의 경사매개변수를 2차원으로 가정하여 해석하였으며, Cauchy 문제는 불균일 조류상의 균일 수면중력파에 대하여 해석하였다. 또한, 파의 경사, 주기의 범위(Frequency range) 그리고 자유표면하의 조류의 분포들간의 조화에 대한 연구가 수행되었으며 해류 및 이동파와 연계되어 수중파의 최전 후방에 형성될 수 있는 정적 파형 (Steady wave pattern)이 수면파형에 포함되었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.1
• /
• pp.143-149
• /
• 1993

An approach is presented for efficient numerical integration of the Sormnerfeld type integrals pertinent to the microstrip surface Green's function arising in the problem of an electric current point source on an infinite planar grounded dielectric substrate. This approach, valid for both lossless and lossy dielectric substrates, is based on the deformation of the integration contour via a coordinate transformation and Cauchy's residue theory, and identifies clearly the effects of surface waves. I ts useful application is in a rigorous moment method analysis of micros trip antenna arrays and microstrip guided wave structures. The efficiency and the usefulness of the present approach are emphasized through some numerical calculations of the impedance matrix elements with associated CPU times.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.3
• /
• pp.296-301
• /
• 2012

This paper describes an analytic method for infrared thermography to detect surface cracks in thin plates. Traditional thermographic method uses the spatial contrast of a thermal field, which is often corrupted by noise in the experiment induced mainly by emissivity variations of target surfaces. This study developed a robust analytic approach to crack detection for thermography using the holomorphic function of a temperature field in thin plate under steady-state thermal conditions. The holomorphic function of a simple temperature field was derived for 2-D heat flow in the plate from Cauchy-Riemann conditions, and applied to define a contour integral that varies depending on the existence and strength of singularity in the domain of integration. It was found that the contour integral at each point of thermal image reduced the noise and temperature variation due to heat conduction, so that it provided a clearer image of the singularity such as cracks.

• Journal of Ocean Engineering and Technology
• /
• v.12 no.1
• /
• pp.85-98
• /
• 1998

본 논문의 수치해법은 경계치문제를 풀기 위하여 코시이론(Cauchy's theorem)을 사용하였다. 경계치문제는 완전한 물체표면조건과 자유표면조건을 만족시키는 초기치문제로 귀결된다. 현 수치해법에서 무한영역은 수치계산 영역인 비선형 영역과 선형 자유표면조건을 만족하는 선형영역으로 나누어진다. 선형영역의 해는 과도 그린(Green)함수를 사용하여 정합조건을 부과함으로써, 수치계산은 비선형 영역에서만 수행된다. 본 논문에서 저자는 수치계산 영역에서 코시이론을 사용하여 적분방정식을 도출하였고, 무한영역의 해는 정합면에서 과도 그린함수를 사용하여 표현하였다. 본 수치계산에서 자유표면에 요소 재분배법을 적용함으로써 쇄파현상에 대해서도 안정적인 수치해석을 할 수 있었다. 본 논문에서 개발된 수치방법을 적용한 문제는 다음과 같다. 첫째는 자유표면에서 실린더가 강제동요하는 경우에 자유표면형상과 힘을 계산하여 이전의 실험치 및 계산치와 비교하였다. 두번째로는 실린더가 자유수면하에서 일정한 속도로 항주하는 경우에는 조파저항과 양력을 계산하여 고차 스펙트럴법과 비교하였다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.6
• /
• pp.665-670
• /
• 2011

In this paper, a new approach to detect surface cracks from a noisy thermal image in the infrared thermography is presented using an holomorphic characteristic of temperature field in a thin plate under steady-state thermal condition. The holomorphic function for 2-D heat flow field in the plate was derived from Cauchy Riemann conditions to define a contour integral that varies according to the existence and strength of a singularity in the domain of integration. The contour integral at each point of thermal image eliminated the temperature variation due to heat conduction and suppressed the noise, so that its image emphasized and highlighted the singularity such as crack. This feature of holomorphic function was also investigated numerically using a simple thermal field in the thin plate satisfying the Laplace equation. The simulation results showed that the integral image selected and detected the crack embedded artificially in the plate very well in a noisy environment.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.253-256
• /
• 2011

본 논문에서는 표면효과와 비선형 탄성효과를 고려한 FCC 나노박막의 순차적 멀티스케일 해석 모델을 제시한다. 표면에서의 구성방정식은 표면응력과 표면탄성계수를 이용하여 선형으로 표시되며, 표면효과를 나타내기 위한 표면물성들은 EAM 포텐셜을 이용한 원자적 계산 방법으로 계산된다. 두께가 얇은 나노박막은 표면응력으로 인하여 면내 방향으로 수축 또는 인장의 변형이 발생하게 된다. 나노박막의 평형상태에서의 변형율은 두께가 얇은 박막의 경우 재료가 선형 탄성 영역을 벗어나는 값을 가지는 경우가 많으므로 나노박막의 해석시 벌크 영역의 비선형 탄성 효과를 고려해야 한다. 이러한 비선형 탄성 효과를 고려하기 위해 본 연구에서는 FCC 구조를 가지는 금속의 비선형 탄성 모델을 제시하고, EAM 포텐셜로 계산된 응력과 탄성 계수를 이용하여 매칭 기법을 통하여 비선형 탄성 모델의 계수들을 결정한다. 또한 Cauchy-Born Rule 모델과 분자동역학 전산모사를 통하여 본 연구에서 제안된 비선형 탄성 모델에 대한 검증을 수행한다.

• Journal of Aerospace System Engineering
• /
• v.1 no.1
• /
• pp.25-35
• /
• 2007

In this paper, the interlaminar crack problems of a fiber metal laminate (FML) under generalized plane deformation are studied using the theory of anisotropic elasticity. The crack is considered to be embedded in the matrix interlaminar region (including adhesive zone and resin rich zone) of the FML. Based on Fourier integral transformation and the stress matrix formulation, the current mixed boundary value problem is reduced to solving a system of Cauchy-type singular integral equations of the 1st kind. Within the theory of linear fracture mechanics, the stress intensity factors are defined on terms of the solutions of integral equations and numerical results are obtained for in-plane normal (mode I) crack surface loading. The effects of location and length of crack in the 3/2 and 2/1 ARALL, GLARE or CARE type FML's on the stress intensity factors are illustrated.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.1
• /
• pp.45-64
• /
• 1993

This paper dealt with the application of a numerical method developed by the authors using the matching method proposed in the previous paper on "The Nonlinear motions of cylinders(I)[16]", and Cauchy's theorem to the problems associated with hydrodynamic forces acting on a heaving cylinders translating in a calm water and also motions of cylinders in waves. In spectral method. body boundary condition in submerged case is satisfied exactly but one in floating case is not satisfied exactly. In the numerical code developed here, the boundary condition at the free-surface and body surface is satisfied exactly at its instaneous position. It is of interest to note that the present scheme could be applied to a free-surface-piercing body without experiencing a difficulty in the numerical convergence. The computed results are compared with other results([6], [12]).

• Structural Engineering and Mechanics
• /
• v.67 no.3
• /
• pp.277-281
• /
• 2018

The analytical solution of two functionally graded layers with Volterra type screw dislocation is investigated under anti-plane shear impact loading. The energy dissipation of FGM layers is modeled by viscous damping and the properties of the materials are assumed to change exponentially along the thickness of the layers. In this study, the rate of gradual change ofshear moduli, mass density and damping constant are assumed to be same. At first, the stress fields in the interface of the FGM layers are derived by using a single dislocation. Then, by determining a distributed dislocation density on the crack surface and by using the Fourier and Laplace integral transforms, the problem are reduce to a system ofsingular integral equations with simple Cauchy kernel. The dynamic stress intensity factors are determined by numerical Laplace inversion and the distributed dislocation technique. Finally, various examples are provided to investigate the effects of the geometrical parameters, material properties, viscous damping and cracks configuration on the dynamic fracture behavior of the interacting cracks.