• Environmental Engineering Research
• /
• v.18 no.4
• /
• pp.211-219
• /
• 2013

Rare-earth manganites have a great potential for environmental applications based on their chemical and physical properties. The use of rare-earth manganites as catalysts for environmentally essential reactions was reviewed. Artificial neural networks were used to assess the catalytic activity in oxidation reactions. Relative catalytic activities of the catalysts were further discussed. We concluded that cerium manganite is the most practicable catalyst for technological purposes.

• Journal of the Korean institute of surface engineering
• /
• v.33 no.4
• /
• pp.261-265
• /
• 2000

Geometrically and chemically well defined Pt/alumina model catalysts have been prepared. To this end, we fabricated electrochemically alumina supports in which pores of constant size, length and shape were regularly distributed over a wide area of the surface. Platinum particles were dispersed on the pore surfaces via organometallic chemical vapor deposition technique using (trimethyl) methylcyclopentadienylplatinum (IV) as a precursor. The chemical composition of the alumina plane surfaces was examined by Auger electron spectroscopy and the adsorption characteristics of the platinum particles were studied by thermal desorption spectroscopy. A variety of industrial catalytic problems are now open for further investigation utilizing the Pt/alumina model catalysts.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.1
• /
• pp.12-15
• /
• 1986

Lead tolerance of $Pt/Al_2O_3$ catalysts was evaluated for CO oxidation depending on the properties of the alumina supports and base metals added as promoter. Among the four different alumina supports, the support with a large macropore volume (0.45 cc/g) and 5% Ce has shown the best resistence to lead poisoning. Most of the base metals added to the Pt-catalysts were found to be ineffective for improving lead resistence, but boron has shown an excellent lead tolerence, although it decreases the initial catalytic activity.

• Bulletin of the Korean Chemical Society
• /
• v.11 no.5
• /
• pp.403-406
• /
• 1990

Two types of new silica catalysts modified with benzenesulfonic acid derivatives were prepared by esterification or phenylation followed by sulfonation. Both catalysts thus prepared were tested as acid catalysts for 2-propanol dehydration and cumene dealkylation reactions. B catalyst () were more active than A catalyst (). Highter catalytic activity for B catalyst may be accounted for by higher resistance to water, higher acid strength, more acidity, and better thermal stability as compared with A catalyst.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.12
• /
• pp.1433-1436
• /
• 1999

The 2-(2,4-dimethoxyphenyl)-4-MDO (2) underwent polymerization with ring opening as well as cyclization reaction in the presence of various cationic catalysts such as boron trifluoride, trifluoromethanesulfonic acid, p-toluenesulfonic acid, hydrochloric acid and trifluoroacetic acid. They afforded a mixture of the ring-opened poly(keto ether) and 3(2H)-dihydrofuranone derivative. Both the methylene group and oxygen atom of 1,3-dioxolane ring were participated in the reaction with cationic catalyst. The contents of the polymer and cyclization product were variable according to the acid strength of the cationic catalysts.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.153-154
• /
• 2006

The development of metal catalysts that can polymerize or copolymerize "polar" $Ch_2=CHX$ monomers by insertion mechanisms would significantly expand the scope of metal-catalyzed polymerization and enable the synthesis of new materials with enhanced properties. We have studied the reactions of single-site olefin polymerization catalysts with vinyl chloride, acrylonitrile, and vinyl ethers, in order to probe monomer coordination trends, insertion rates and regioselectivity, and the structures and reactivity of metal alkyls that contain functional groups on the alpha and beta positions of the alkyl chain. These studies provide insights to the key issues that underlie the "polar monomer" problem. Copolymerization of olefins and selected vinyl ethers has been achieved.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.3
• /
• pp.245-252
• /
• 2010

For the purpose of evaluating to remove elemental mercury using SCR (Selective Catalytic Reduction) catalysts, the result of the concentration variation of elemental mercury in lab experiment and field measurement was compared. The effect of the elemental mercury oxidation on commercial catalysts was studied in simulated gas. Three species of SCR catalyst, $V_2O_5-TiO_2$ type, were selected. The elemental mercury reduced 30% without HCl gas in SCR operating condition. But the width of reduction increased 60% at 20 ppm HCl gas. According to the result of field measurement, reduction rate of elemental mercury at SCR outlet showed 60%. The total mercury concentration decreased about 20%. The results were similar to the lab test. The results of chemical analysis of test sample showed increase of mercury concentration but surface change was not observed.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.3 no.2
• /
• pp.116-121
• /
• 2017

To overcome the low reactivity and solubility of alkali metal fluorides (MFs), various types of phase transfer catalysts (PTCs) have been developed over the last decades. However, since the fluoride activated by such PTC sometimes has a strong basicity, it may cause various side reactions such as elimination reaction or hydroxylation reaction in the nucleophilic fluorination reaction. Also, they may cause separation problems in the compound purification process. In recent advanced study, various PTCs have been developed to solve these problem of conventional catalyst. In this review, we would like to introduce three kinds of novel multifunctional organic catalysts such as bis-tert-alcohol-functionalized crown-6-calix[4]arene (BACCA), easy separable pyrene-tagged ionic liquid (PIL) by reduced graphene oxide (rGO), and tri-tert-butanolamine organic catalyst.

• Journal of the Korean Magnetic Resonance Society
• /
• v.4 no.1
• /
• pp.1-11
• /
• 2000

Supported vanadium oxides are being used extensively as catalysts for a variety of reactions, including partial oxidations and ammoxidations. A series of vanadium oxide supported on TiO2-ZrO2 was obtained by impregnating ammonium metavanadate slowly into a mixed precipitateof Ti(OH)4-Zr(OH)4, followed by calcining in air at high temperatures. The prepared catalysts were characterized by 51V solid-state NMR. In the calcined catalysts 51V NMR studies indicated the peaks corresponding to distorted tetrahedral vanadia species at low V2O5 contents and octahedral vanadia species at high vanadia loadings. These results illustrate the suitability of 51V NMR as a unique quantitative spectroscopic tool in the structural analysis of vanadium(V) oxide catalytic materials.

• Journal of Hydrogen and New Energy
• /
• v.21 no.6
• /
• pp.493-499
• /
• 2010

Steam reforming (SR) of glycerol, a main by-product of manufacturing process of bio-diesel, for the production of hydrogen was investigated over the Ni-based catalysts. The Ni-based catalysts were prepared by an impregnation method, and characterized by $N_2$ physisorption, CO chemisorption, XRD and TEM techniques. It was found that the Ni/${\gamma}-Al_2O_3$ catalyst showed higher conversion and catalytic stability for the carbon formation than the other catalysts in the steam reforming of glycerol under the tested conditions. The results suggest that the steam reforming of glycerol over modified Ni/${\gamma}-Al_2O_3$ catalyst minimized carbon formation can be applied in hydrogen station for fuel-cell powered vehicles and fuel processor for stationary and portable fuel cells.