• Conservation Science in Museum
• /
• v.2
• /
• pp.77-82
• /
• 2000

The purpose of this study is to evaluate the effect of ART-SORB which is commonly used in museums and galleries at home and abroad including National Museum of Korea, so as to collect useful information to control micro-environment. Experiment was conducted in air-tight condition in order to evaluate only the effect of ART-SORB excluding any influence from outside factors. A certain amount of ART-SORB considering the case size and ART-SORB in cassette type were used to evaluate the humidity controlling capability. The result showed that target humidity was reached in 10~17 hours in case of using corresponding amount of ART-SORB to the cubic volume and in 5~6 hours in case of excessive use of cassette type ART-SORB. And it also showed that humidity can be controlled in the range of RH 50~70%. In addition, ART-SORB was excellent at raising humidity at low humidity and poor at high humidity. Therefore, ART-SORB turned out to be an effective humidity buffer for controlling micro-environment of such artifacts as wooden ware, lacquer ware and paintings, which require high humidity. However, unfortunately, there are some difficulties in applying this result to real condition, given the fact that this study was conducted under firm air-tight case. Therefore, ART-SORB can be fully effective only in firm air-tight case.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.7
• /
• pp.3309-3315
• /
• 2016

Helicobacter pylori as the second most common cause of gastric cancer in the world infects approximately half of the developed countries population and 80% of the population living in developing countries. Integrons as genetic reservoirs play major roles in dissemination of antimicrobial resistance genes. To the best of our knowledge, this is the first study to report carriage of class 1 and 2 integrons and associated gene cassettes in H. pylori isolates from Iran. This cross-sectional study was conducted in Tehran among 110 patients with H. pylori infection. Antimicrobial susceptibility testing (AST) for H. pylori strains were assessed by the micro broth dilution method. Class 1 and 2 integrons were detected using PCR. In order to determine gene cassettes, amplified fragments were subjected to DNA sequencing of both amplicon strands. The prevalence of resistance to clarithromycin, metronidazole, clarithromycin, tetracycline, amoxicillin, rifampin, and levofloxacin were 68.2% (n=75), 25.5% (n=28), 24.5% (n=27), 19.1% (n=21), 18.2% (n=20) and 16.4% (n=18), respectively. Frequency of multidrug resistance among H. pylori isolates was 12.7%. Class 2 integron was detected in 50 (45.5%) and class 1 integron in 10 (9.1%) H. pylori isolates. The most predominant gene cassette arrays in class 2 integron-bearing H. pylori were included sat-era-aadA1, dfrA1-sat2-aadA1, blaoxa2 and, aadB whereas common gene cassette arrays in class 1 integron were aadB-aadA1-cmlA6, aacA4, blaoxa2, and catB3. The high frequency of class 2 integron and multidrug resistance in the present study should be considered as a warning for clinicians that continuous surveillance is necessary to prevent the further spread of resistant isolates.

• Korean Journal of Microbiology
• /
• v.46 no.4
• /
• pp.326-333
• /
• 2010

A total of 105 nontyphoid Salmonella isolated from infants in Seoul from 2003 to 2009 was investigated for their serotype, antimicrobial resistance, characterization of integron, and the patterns of Pulsed-field gel electrophoresis (PFGE). Eighteen serotypes were detected in 105 isolates, and the two most common serotypes were S. Enteritidis (47.6%) and Montevideo (15.2%). Among the Salmonella serovars, a high level of antimicrobial resistance was found to ampicilin (60%), tetracycline (46.7%), streptomycin (35.2%) and nalidixic acid (28.6%). In the multi-drug resistance patterns, the predominant patterns were only nalidixic acid (15.7%), ampicillin-ampicillin/sulbactam-tetracycline (14.5%), and ampicillin-streptomycin-chloramphenicol-tetracycline (10.8%). PCR and DNA sequencing analysis revealed the presence of class 1 integron in 20 isolates (19%). Of the class 1 integron positive isolates 20% harboured the integron-associated gene cassettes : aadA2, blaP1, dfr17-aadA5, dfrA12-aadA2, and aadA7. PFGE was carried out to examine the genetic relatedness among S. Enteritidis isolates. Except for three strains, fifty strains were divided by three pulsotypes.

• Korean Journal of Microbiology
• /
• v.44 no.3
• /
• pp.264-269
• /
• 2008

To develop an amylolytic industrial yeast strain producing $\beta$-amylase, the BAMY gene encoding Achlya bisexualis $\beta$-amylase was constitutively expressed under the control of the alcohol dehydrogenase gene promoter (ADC1p) in an industrial strain of Saccharomyces cerevisiae. Yeast transformation was carried out by an integration system containing $\delta$-sequences as the recombination site. The integrative cassette devoid of bacterial DNA sequences was constructed that contains the BAMY gene and $\delta$-sequences. Industrial S. cerevisiae transformed with this integrative cassette secreted 45 kDa $\beta$-amylase into the culture medium. The $\beta$-amylase activity of the transformant was approximately 18.5-times higher than that of A. bisexualis. The multi-integrated BAMY genes in the transform ant were stable after 100 generations of growth in nonselective medium. Hydrolysis of soluble starch and various starches with the enzyme released maltose but not glucose or oligosaccharides.

• Radiation Oncology Journal
• /
• v.22 no.1
• /
• pp.69-75
• /
• 2004

Purpose : A new fiduciary plate and orientation marker have been devised to assist the quality assurance (QA) procedures for port films in radiation therapy department. The plate is used in conjunction with the film/cassette combination during weekly QA procedures, at Seoul National University Hospital (SNUH), in order to verify treatment fields in high radiation therapy. Materials and Methods : A new fiduciary plate was fabricated using an acrylic plate, cerrobend, standard blocking tray and mercury. The acrylic plate had the dimension of $1{\times}25{\times}25$ cm, with two fiduciary markers. The plate was rigidly attached onto the standard blocking tray, thus making it easier to set the fiduciary plate to the center on the radiation field on the linear accelerator. The plate had two 2-mm vertical and horizontal lines, with the minor scales in 2-cm steps. The orientation marker was a small mercury filled disk, which was inserted into the plate. Results : The geometrical structure of the lines in the plate makes it easier to correlate two different images between the simulation and port films. The marker clearly indicated the orientation of the film, for example, the anterior, posterior, left, right and various oblique orientations, without the placement of a conventional orientation marker. Also, the new orientation marker could easily be applied to the simulator by placing the small orientation marker onto the image intensifier or in front of the film/cassette holder. Conclusions : The new fiduciary plate appears to be useful in verifying the treatment fields, and the new orientation marker makes the film orientation simple, which is expected to lower the block fabrication errors.

• Journal of Pharmaceutical Investigation
• /
• v.30 no.3
• /
• pp.191-199
• /
• 2000

Genomics is providing targets faster than we can validate them and combinatorial chemistry is providing new chemical entities faster than we can screen them. Historically, the drug discovery cascade has been established as a sequential process initiated with a potency screening against a selected biological target. In this sequential process, pharmacokinetics was often regarded as a low-throughput activity. Typically, limited pharmacokinetics studies would be conducted prior to acceptance of a compound for safety evaluation and, as a result, compounds often failed to reach a clinical testing due to unfavorable pharmacokinetic characteristics. A new paradigm in drug discovery has emerged in which the entire sample collection is rapidly screened using robotized high-throughput assays at the outset of the program. Higher-throughput pharmacokinetics (HTPK) is being achieved through introduction of new techniques, including automation for sample preparation and new experimental approaches. A number of in vitro and in vivo methods are being developed for the HTPK. In vitro studies, in which many cell lines are used to screen absorption and metabolism, are generally faster than in vivo screening, and, in this sense, in vitro screening is often considered as a real HTPK. Despite the elegance of the in vitro models, however, in vivo screenings are always essential for the final confirmation. Among these in vivo methods, cassette dosing technique, is believed the methods that is applicable in the screening of pharmacokinetics of many compounds at a time. The widespread use of liquid chromatography (LC) interfaced to mass spectrometry (MS) or tandem mass spectrometry (MS/MS) allowed the feasibility of the cassette dosing technique. Another approach to increase the throughput of in vivo screening of pharmacokinetics is to reduce the number of sample analysis. Two common approaches are used for this purpose. First, samples from identical study designs but that contain different drug candidate can be pooled to produce single set of samples, thus, reducing sample to be analyzed. Second, for a single test compound, serial plasma samples can be pooled to produce a single composite sample for analysis. In this review, we validated the issue whether the second method can be applied to practical screening of in vivo pharmacokinetics using data from seven of our previous bioequivalence studies. For a given drug, equally spaced serial plasma samples were pooled to achieve a 'Pooled Concentration' for the drug. An area under the plasma drug concentration-time curve (AUC) was then calculated theoretically using the pooled concentration and the predicted AUC value was statistically compared with the traditionally calculated AUC value. The comparison revealed that the sample pooling method generated reasonably accurate AUC values when compared with those obtained by the traditional approach. It is especially noteworthy that the accuracy was obtained by the analysis of only one sample instead of analyses of a number of samples that necessitates a significant man-power and time. Thus, we propose the sample pooling method as an alternative to in vivo pharmacokinetic approach in the selection potential lead(s) from combinatorial libraries.

• Korean Journal of Clinical Laboratory Science
• /
• v.56 no.1
• /
• pp.43-51
• /
• 2024

[⁶⁸Ga]Ga-FAPI-04 is a promising radiopharmaceutical that binds specifically to fibroblast activation protein, which is overexpressed in more than 90% of malignant epithelial tumors but not in normal healthy tissue. This study aimed to develop an efficient method for producing ⁶⁸Ga-labelled FAPI-04 using a cassette-based automated synthesizer. [⁶⁸Ga]GaCl₃ was eluted from an Eckert & Ziegler Medical germanium-68/gallium-68 generator using 2.5 mL of 0.1 M HCl. The synthesis of the [⁶⁸Ga]Ga-FAPI-04 was performed using different concentrations of HEPES (1~2.5 M; 4-(2-hydroxyethyl) piperazine-1-ethanesulfonic acid) in 3~10 minutes; amounts of FAPI-04 precursor (5~50 ㎍) and reaction temperature (25℃~100℃) were optimized on the BIKBox^® synthesizer. The labeling efficiency of [⁶⁸Ga]Ga-FAPI-04 was greater than 96% (decay corrected) using 25 ㎍ FAPI-04 synthesized in 10 minutes at 100℃ in 2 M HEPES (pH 3.85), and its stability was greater than 99% at 6 hours. The total synthesis time of [⁶⁸Ga]Ga-FAPI-04 was 32.4 minutes, and the product met all quality control criteria. In this study, we developed and optimized a labeling method using [⁶⁸Ga]Ga-FAPI-04 using a cassette-based synthesizer. The devised method is expected to be useful for supplying [⁶⁸Ga]Ga-FAPI-04 for diagnosis in clinical practice.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.21-22
• /
• 2003

Fungicide treatment is the most important method for the control of plant diseases caused by phytopathogenic fungi. But fungicide resistant strains have appeared in many phytopathogenic fungi. Until now, molecular mechanisms of fungicide resistance such as mutation of target protein, overproduction of target enzyme and detoxification of fungicide have been designated. Recently, it was demonstrated that active efflux of fungicides mediated by ATP-binding cassette (ABC) transporters also contributes to fungicide resistance in several filamentous fungi, such as Aspergillus nidulans, Penicillium digitatum and Botrytis cinerea.(중략)

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1994.03a
• /
• pp.218-222
• /
• 1994

The chassis of T.V, cassette, radio and telephone are made up thin-iron plates that makes a lot of female screws to assemble various parts. Then makes hole in the iron plate and forming female screws of burring face after the burring. Female screws forming in thin-iron plate is very difficult working then rolled forming process use of plastic deformation instead of cut forming. In this study goals are solve the trouble problem of industrial field and develop new model tap for prevent chips.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.421-426
• /
• 1989

Many of semiconductor manufacturing companies persuit automation of wafer fabrication to improve the yields and quality of their products. Development of real-time control system for wafer fabrication and wafer/cassette automatic transfer-system is the most important part to achieve the purpose. In this paper, SECS protocol proposed by SEMI is briefly reviewed and an implementation method of real-time monitoring and control system is suggested as one of the possible ways for wafer fabrication automation. The system consists of process equipments supporting SECS.