• Journal of Environmental Impact Assessment
• /
• v.32 no.2
• /
• pp.123-133
• /
• 2023

Wastewater generated in the secondary battery production process contains lithium and high-concentration sulfate. Recently, as demand as demand for high-Ni precursors with high-energy density has surged, nickel emission is also a concern. Lithium and sulfate are not included in the current water pollutant discharge standard, so if they are not properly processed and discharged, the negative effect on future environment may be great. Therefore, in this study, the ecotoxicity of lithium, nickel, and sulfate, which are potential contaminants that can be discharged from the secondary battery production process, was evaluated using water flea (Daphnia magna) and luminescent bacteria (Aliivibrio fischeri). As a result of the ecotoxicity test, 24-hour and 48-hour D. magna EC₅₀ values of lithium were 18.2mg/L and 14.5mg/L, nickel EC50 values were 7.2mg/L and 5.4mg/L, and sulfate EC₅₀ values were 4,605.5mg/L and 4,345.0mg/L, respectively. In the case of D. magna, it was found that there was a difference in ecotoxicity according to the contaminants and exposure time (24 hours, 48 hours). Comparing the EC₅₀ of D. magna for lithium, nickel, and sulfate, the EC₅₀ of nickel at 24h and 48h was 39.6-37.2% compared to lithium and 0.1-0.2% compared to sulfate, which was the most toxic among the three substances. The difference appeared to be at a similarlevelregardless of the exposure time. The EC₅₀ of sulfate was 253.0-299.7% and 639.5-804.6%, respectively, compared to lithium and nickel, showing the least toxicity among the three substances. The 30-minute EC₅₀ values of luminescent bacteria forlithium, nickel, and sulfate were 2,755.8mg/L, 7.4mg/L, and 66,047.3mg/L,respectively. Unlike nickel, it was confirmed that there was a difference in sensitivity between D. magna and A. fischeri bacteria to lithium and sulfate. Studies on the mixture toxicity of these substances are needed.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.41 no.1
• /
• pp.47-55
• /
• 2023

In this study, the following conclusions were drawn by analyzing the size, proportion, shape, angle, distribution, etc. of stones in order to identify the principles of facade molding of stonework of the 5th to 7th centuries of the Silla Dynasty. First, the uniformity of the size of the stones of the stone foundations of the Silla Dynasty was low at -0.8 to 4.1. This means that stones of various sizes were used, from small stones to large stones. In addition, the distribution of large stones in stonework of the Silla Dynasty appeared evenly regardless of height. This was common in the stonework of the Silla Dynasty, regardless of structural classification such as wells and mountain fortresses. It is thought that the Silla people did not only pursue practicality and efficiency in stone construction, but also considered design elements. Second, the proportional deviation of the stones of the stone walls of the Silla Dynasty was high, ranging from 0.861 to 1.515. This means that the stonework of the Silla Dynasty did not use only long flagstone-shaped stones, but used a mixture of long and short stones. Third, the shape average of the stones of the stonework of the Silla Dynasty was low at 0.45, and the shape deviation was high at the maximum of 0.15. This means that the stones as a whole have irregular shapes, and each stone has a high difference in shape. Fourth, the angle deviation of the stones of the Silla Dynasty was 4.3 to 16.2, and the average angle was 2. This means that the angle of each stone on the stone axis of the Silla Dynasty is tilted to the left and right. Fifth, there was no correlation between stone size, slenderness ratio, shape, and angle in the stone axes of the Silla Dynasty. In the case of stone axes in the Joseon Dynasty, there was a positive correlation between stone size and slenderness, and a negative correlation between stone size and shape. It can be said that the stones of the Joseon Dynasty were relatively standardized, but the Silla Dynasty showed the beauty of moderation by keeping the nature of the material and becoming one with the material.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.3
• /
• pp.269-275
• /
• 2019

Purpose: This study analyzed the treatment effects of drain insertion in the posteromedial portal after an arthroscopic synovectomy and posterior septum resection for pyogenic arthritis. Materials and Methods: From June 2005 to December 2016, 56 cases (55 patients, 1 case of bilateral knee) were diagnosed with pyogenic arthritis and arthroscopic treatment was performed. Fourteen patients (25.0%) were identified with causative organisms. The average follow-up period was 12.3 months, and the mean age was 67.8 years old. Twenty-four cases were males and 31 cases were females. Kellgrene-Lawrence grade (K-L grade) I was 6 patients, II was 20 patients, III was 11 patients, and IV was 18 patients. Surgery was performed through six portal. The posterior septum was removed and a drainage tube was inserted from the posterior medial side to the posterior side of the joint. The Lysholm score was used after surgery for a functional evaluation. The K-L grade at the time of admission and at the last follow-up were compared for a radiological evaluation. Results: The mean normalization period of the C-reactive protein was 59.8 days (6-164 days). Intravenous antibiotics were used for an average of 37.1 days. The results of the functional evaluation revealed a mean Lysholm score of 64.5 (30-98) in a total of 56 cases. Two reoperations was performed, but the treatment was completed with same method in all patients. The K-L grade was similar at the time of surgery and at the last follow-up (p>0.05). Conclusion: The method of drain insertion in the posteromedial portal after arthroscopic synovectomy and posterior septum resection for pyogenic arthritis is an effective technique that can obtain satisfactory results by inducing proper exudate discharge.

• Journal of the Korean Orthopaedic Association
• /
• v.52 no.1
• /
• pp.1-6
• /
• 2017

Purpose: To retrospectively compare minimally invasive percutaneous plate osteosynthesis (MIPPO) with open plate fixation for the treatment of clavicle midshaft fracture. Materials and Methods: Between November 2011 to May 2014, 40 cases that were followed for more than 1 year-among all cases of MIPPO and open plate fixation-were analyzed. The study population was divided into two groups: group A included 20 cases of MIPPO and group B included 20 open plate fixation cases. The comparative analysis between the two groups was based on the operative time, bone union, functional evaluation (American Shoulder and Elbow Society score), incision length, pain relief (visual analogue scale, VAS), and complication. Results: The bone union was successful for all the cases, and the functional evaluation scores of the shoulder joint were satisfactory for both groups (p>0.05). The operative time was 47.5 minutes and 58.7 minutes for group A and B, respectively (p<0.05). The incision length for group A was 6.2 cm and that for group B was 10.7 cm with statistical significance (p<0.05). Pain relief (VAS) after surgery for group A showed a quick recuperation in the early stages. For complications, there were 2 cases of dysesthesia and 1 case of malunion due to metal fixation failure in group A. There were 6 cases of dysesthesia and 2 cases of cosmetic problem due to hypertrophic scar in group B. Conclusion: Surgical results of clavicle shaft fracture were satisfactory for both groups, but group A had advantages of shorter operative time, minimal incision length, and better pain relief in the early stages compared with group B. However, we need further evaluations with long-term follow-up results and complications, such as malunion and exposure on radiation.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.73.4-74
• /
• 2021

한국천문연구원은 2017년 제1차 구술채록사업에 이어 2020년 제2차 사업을 진행하면서 최초로 원외 원로에 대한 구술채록을 시도하였다. 국가 대표 천문연구의 산실로서 연구원 존재 의의를 확립하기 위하여 원내 원로에 국한되었던 구술자 대상을 확장한 것이다. 그 첫 외부 구술 대상자로 방득룡 전임 노스웨스턴 천문학과 교수를 선정하여 2020년 7월부터 준비단계에 들어갔다. 방득룡 전(前)교수가 첫 번째 한국천문연구원 원외 인사 구술자로 선정된 이유는, 그가 우리나라 천문대1호 망원경 구매 선정에 개입한 서신(1972년)이 자료로 남아있었기 때문이다. 한국천문연구원에서 2017년에 수행한 제1차 구술채록사업에서 구술자로 참여한 오병렬 한국천문연구원 원로가 기증한 사료들은 대부분 연구원 태동기 국립천문대 구축과 망원경 구매 관련 자료였으며 이 가운데 1972년 당시 과학기술처 김선길 진흥국장에게 Boller and Chivesns(사(社))의 반사경을 추천한 방득룡 전(前)교수의 서신은 한국 천문학 발전사에서 중요한 사료였다. 연구진은 이 자료를 시작으로, 방득룡 전(前)교수의 생존 여부와 문서고의 공기록물들에서 그의 흔적을 찾아가기 시작했다. 놀랍게도 그는 실제 세계와 한국천문연구원 문서고 깊숙이 기록물들 모두에서 상존하고 있었다. 1927년생인 방득룡 전(前)교수, Dr. John D. R.은 미국 플로리다 한 실버타운에서 건강한 정신으로 생존하여 있었고 연구진의 인터뷰에 흔쾌히 응했다. 2020년 9월 16일에 한국천문연구원 본원 세종홀 2층 회의실에서 영상통신회의로 그와의 구술인터뷰가 진행되었다. 이 구술인터뷰는 원외 인사가 대상이란 점 외에도 방법적으로는 전형적인 대면 방식이 아닌 영상 인터뷰였다는 점에서 코로나 시대의 대안이 되는 실험적 시도였다. 현대 한국천문학 발전사의 재조명 측면에서도 의미가 있었다. 1960년대 초반부터 1992년 정년퇴임까지 30년을 미국 유수 대학교 천문학과 교수로 재직하며 활발한 활동을 해 온 한국계 천문학자가 우리나라 최초 반사망원경 구매 선정에 적극 개입하였던 역사는, 공문서 자료들과 서신 사료들에 이어 그의 육성으로 나머지 의구심의 간극이 채워졌다. 또 구술자 개인이 주관적으로 중요하다고 여기는 '기억'이 중요한 아카이빙 콘텐츠 확장의 단초가 될 수 있다는 것을 보여줌으로써 구술사 연구에 있어서도 중요한 관점을 주었다. 애초 연구진이 방득룡 전(前)교수의 공식 기록에서 아카이빙의 큰 줄기로 잡았던 것은 1948년 도미, 1957년 위스콘신 대학교 천문학 박사학위 취득, 1962년부터 노스웨스턴 대학(일리노이주 에반스턴)의 천문학 교수진, 1992년 은퇴로 이어진 생애였다. 그러나 그와의 구술 준비 서신 왕래와 구술을 통하여 알게 된 그가 인생에서 중요시 여겼던 지점은, 1948년 도미 무렵 한국의 전쟁 전 상황과 당시 비슷한 시기에 유학한 한국 천문학자들의 동태, 그리고 1957년부터 1962년까지 프린스턴 대학교에서 M. Schwarzschild 교수와 L. Spitzer 교수를 보조하며 Stratoscope Project를 연구하였던 경험이었다. 기록학적 의미에서도, 전자를 통해서 그와 함께 동시대 한국 천문학을 이끌었던 인재들의 맥락정보를 얻을 수 있었으며, 후자를 통해서는 세계 천문학사에 큰 영향을 미친 석학에 대한 아카이브 정보와의 연계 지점과 방득룡 전(前)교수의 연구 근원을 찾을 수 있었다. 이들은 추후 방득룡 콘텐츠 서비스 시에 AIP, NASM, Lyman Spitzer 콘텐츠, 평양천문대, 화천조경천문대, 서울대와 연세대, 그리고 한국천문연구원까지 연계되어 전 세계 폭넓은 이용자들의 유입을 유도할 수 있는 검색 도구가 될 수 있다. 이번 방득룡 구술사 연구에서 구술자 개인의 주관적인 소회가 공식 기록이 다가갈 수 없는 역사적 실체에 일정 부분 가까울 수 있다는 것, 그리고 이를 통하여 개인의 역사는 공동체의 역사로 확장될 수 있다는 사실을 발견할 수 있었다. 또 연구진은 방득룡 전(前)교수의 회상을 통하여 구술자 개인의 시각으로 한국과 미국 천문학계의 공동체 역사를 재조명할 수 있었고, 이것을 아카이브 콘텐츠 확장 서비스에 반영할 수 있다는 기대를 가지게 되었다. 무엇보다 이 연구를 통하여 다양한 주제의 아카이브로 연동될 수 있는 주제어와 검색도구를 구술자 개인의 회상으로부터 유효하게 도출할 수 있다는 것을 확인하였다. 그리고 향후 한국천문 구술아카이브의 확장을 통하여 보다 다양한 활용과 연구 재활용의 선순환이 가능하다는 것도 알 수 있었다. 이는 최근 기록학계에서 대두되고 있는 LOD(Linked Open Data)의 방향성과도 흡사하여 한국천문학 구술사연구의 차세대 통합형 기록관리의 미래모형을 기대케 하는 대목이다.

• Nuclear Engineering and Technology
• /
• v.55 no.6
• /
• pp.2335-2347
• /
• 2023

As medical facilities are usually built at urban areas, special concrete aggregates and evaluation methods are needed to optimize the design of concrete walls by balancing density, thickness, material composition, cost, and other factors. Carbon treatment rooms require a high radiation shielding requirement, as the neutron yield from carbon therapy is much higher than the neutron yield of protons. In this case study, the maximum carbon energy is 430 MeV/u and the maximum current is 0.27 nA from a hybrid particle therapy system. Hospital or facility construction should consider this requirement to design a special heavy concrete. In this work, magnetite is adopted as the major aggregate. Density is determined mainly by the major aggregate content of magnetite, and a heavy concrete test block was constructed for structural tests. The compressive strength is 35.7 MPa. The density ranges from 3.65 g/cm³ to 4.14 g/cm³, and the iron mass content ranges from 53.78% to 60.38% from the 12 cored sample measurements. It was found that there is a linear relationship between density and iron content, and mixing impurities should be the major reason leading to the nonuniform element and density distribution. The effect of this nonuniformity on radiation shielding properties for a carbon treatment room is investigated by three groups of Monte Carlo simulations. Higher density dominates to reduce shielding thickness. However, a higher content of high-Z elements will weaken the shielding strength, especially at a lower dose rate threshold and vice versa. The weakened side effect of a high iron content on the shielding property is obvious at 2.5 µSv=h. Therefore, we should not blindly pursue high Z content in engineering. If the thickness is constrained to 2 m, then the density can be reduced to 3.3 g/cm³, which will save cost by reducing the magnetite composition with 50.44% iron content. If a higher density of 3.9 g/cm³ with 57.65% iron content is selected for construction, then the thickness of the wall can be reduced to 174.2 cm, which will save space for equipment installation.

• Journal of Korea Water Resources Association
• /
• v.56 no.2
• /
• pp.115-124
• /
• 2023

Currently, as the frequency of extreme weather events increases, the scale of damage increases when extreme weather events occur. This has been providing forecast information by investing a lot of time and resources to predict rainfall from the past. However, this information is difficult for non-experts to understand, and it does not include information on how much damage occurs when extreme weather events occur. Therefore, in this study, a risk matrix based on heavy rain damage rating was presented by using the impact forecasting standard through the creation of a risk matrix presented for the first time in the UK. First, through correlation analysis between rainfall data and damage data, variables necessary for risk matrix creation are selected, and PERCENTILE (25%, 75%, 90%, 95%) and JNBC (Jenks Natural Breaks Classification) techniques suggested in previous studies are used. Therefore, a rating standard according to rainfall and damage was calculated, and two rating standards were synthesized to present one standard. As a result of the analysis, in the case of the number of households affected by the disaster, PERCENTILE showed the highest distribution than JNBC in the Yeongsan River and Seomjin River basins where the most damage occurred, and similar results were shown in the Chungcheong-do area. Looking at the results of rainfall grading, JNBC's grade was higher than PERCENTILE's, and the highest grade was shown especially in Jeolla-do and Chungcheong-do. In addition, when comparing with the current status of heavy rain warnings in the affected area, it can be confirmed that JNBC is similar. In the risk matrix results, it was confirmed that JNBC replicated better than PERCENTILE in Sejong, Daejeon, Chungnam, Chungbuk, Gwangju, Jeonnam, and Jeonbuk regions, which suffered the most damage.

• Analytical Science and Technology
• /
• v.20 no.5
• /
• pp.434-441
• /
• 2007

The aim of this paper is to investigate composition of fatty acids in sweat on purpose of latent fingerprint detectant developing and crime evidence searching. Fingerprint from 5 male donors (aged 29-50 years) were collected. We identified fatty acid components on sweat using methylester mixture (37species) as standard fatty acid and analyzed them by GC-FID. As donor was aged, the level of total fat was found to decrease markedly (aged 20-30 years: 56.4-72.0 %, aged 50 years : 32.4-45.4 %). We identifided 28 species fatty acid, primarilly C16:0(palmitic acid), C16:1 (palmitoleic acid), C18:1n9c(oleic acid), C18:0 (stearic acid), C14:0 (tetradecanoic acid) and all sweats were found to contain C12:0 (lauric acid), C15:0 (pentadecanoic acid), C18:2n6c (linoleic acid), C18:2n6t (linolelaidic acid), C20:0 (arachidic acid), C24:0/C20:5n3 (lignoceric acid/eicosapentaenoic acid), but with differing frequencies and at varying levels. C14:1 (myristoleic acid), C15:1 (pentadecenoic acid), C21:0 (heneicosanoic acid), C22:1n9 (erucic acid) were often observed in sample. Ratio of saturated and unsaturated fatty acid was from 0.94:1 to 2.6:1. And decrease of total fatty acids components caused by loss of saturated fatty acid and monounsaturated fatty acid. In case of sweat amino acids, we detected serine ($0-31.9{\mu}L/mL$), threonine ($0-26.2{\mu}L/mL$), glycine ($0-18.9{\mu}L/mL$) and 20-30 years old, highly protein intake ratio individuals increased (10 times) than 50 years old. We observed greatly individual characterization of amino acid compounds in sweat.

• Analytical Science and Technology
• /
• v.22 no.6
• /
• pp.504-513
• /
• 2009

In this study, the safety of commercial herbal medicines was evaluated by determining concentration of hazardous heavy metals. 3,152 samples (244 types) purchased by individual packing unit from market in Seoul, were analyzed using ICP-MS and mercury analyzer. As a result, the content (mg $kg^{-1}$) of Pb was higher in the above-ground part (0.92) than underground part (0.43). But in case of As and Cd contents, there is slightly higher in the underground-parts (0.26, 0.13) than the above-ground parts (0.18, 0.08). There were many herbal medicines exceeding regulatory limits of Cd comparing with other metals. The levels of Hg seemed to be different between above-ground part(0.009) and underground part (0.008) but there was no sample exceeding tolerance limits. In the comparison of imported samples with domestic herbal medicines, it was shown that Pb, As, and Hg were measured highly in the imported ones, Cd was not significantly different (t-test, p<0.05). The significant correlation was observed between Pb and As (r=0.386, p<0.01) but there was no difference in other parts. The heavy metal contamination of herbal medicines measured in total amount of respective heavy metals (mg $kg^{-1}$) was high in Flos (6.241) and Caulis (2.238), and decreased in the order of Cortex (1.634), Herba (1.154), Perithecium (0.861), Rhizoma (0.828), Radix (0.825), Fructus (0.475), and was low in Semen (0.422) (ANOVA-test, p<0.05).

• Journal of the Korean Society of International Agriculture
• /
• v.23 no.5
• /
• pp.520-530
• /
• 2011

This study was carried out to evaluate the possibility of rice double cropping in Korea by assessing the growth and yield performance of rice cultivars transplanted at the extremely-early date. When the transplanted rice seedling was exposed to low temperature below 0℃, the survival rate decreased drastically. However, short exposure to below 0℃ one or two times did not damage transplanted rice seedling so severely. Thus, the earliest transplanting in spring would be possible when minimum temperature rises above 0℃. Compared with the conventional seedling nursery tray (CSNT), seedling rearing with the potted nursery tray was more effective for increasing leaf age and seedling dry weight during nursery period. In the first rice cropping, rice cultivation with seedlings reared in PSNT showed shorter growth duration and cumulative temperature from transplanting to heading than that with seedlings reared in CSNT. The earliest heading date on July 4 in Jinbuolbyeo was earlier by two to three days than that of Dunaebyeo. If rice has not exposed to cold damage, the earliest heading date of Jinbujolbyeo can advance to June 30 or July 1. In this case, rice harvest would be possible on August 5, enabling the rice transplanting of the second rice cropping before August 10. At transplanting time with low temperature damage rice yield were less than 400 kg/10a while rice yield exceeded 400 kg/10a at transplanting time without low temperature damage.