• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.477-480
• /
• 2003

This study discusses the fundamental properties of cement mortar with the kinds and adding ratio of stabilizing agent of recycled water. According to the results, fluidity and air content hardly make difference by the kinds and adding ratio of stabilizing agent. When recycled water is used, setting time is shortened slightly in comparison with plain mortar because of an increase of fine particle. And it is similar to the use of recycled water in the case of A, Band D(stabilizing agent), but shortened significantly in the case of C. Also, it does not show difference with variation of the adding ratio, but as the adding ratio increases, it approach to the value of plain mortar. When recycled water is used, compressive strength is similar to plain concrete, and it shows the larger value in order of D, C and A. As the adding ratio of stabilizing agent increases, it decreases at 3days, but increases at 7 and 28days. However, at the adding ratio of 0.5%, it decreases, instead. Length change ratio by drying shrinkage increases in the case of B in comparison with plain mortar, but is similar to plain mortar in the other stabilizing agent. As the adding ratio of stabilizing agent increases, it decreases, however, increases at the adding ratio of 0.5%

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.11
• /
• pp.1907-1916
• /
• 2003

During decades, there has been much progress in understanding of the inelastic behavior of the materials and numerous inelastic constitutive equations have been developed. The complexity of these constitutive equations generally requires a stable and accurate numerical method. To obtain the increment of state variable, its evolution laws are linearized by several approximation methods, such as general midpoint rule(GMR) or general trapezoidal rule(GTR). In this investigation, semi-implicit integration schemes using GTR and GMR were developed and implemented into ABAQUS by means of UMAT subroutine. The comparison of integration schemes was conducted on the simple tension case, and simple shear case and nonproportional loading case. The fully implicit integration(FI) was the most stable but amplified the truncation error when the nonlinearity of state variable is strong. The semi-implicit integration using GTR gave the most accurate results at tension and shear problem. The numerical solutions with refined time increment were always placed between results of GTR and those of FI. GTR integration with adjusting midpoint parameter can be recommended as the best integration method for viscoplastic equation considering nonlinear kinematic hardening.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.297-302
• /
• 2011

In this study, used Trnsys and will apply metropolitan city distinguishes, fixations and BIPV systems the photovoltaic module arrangement environment which receives solar radiation quantity plentifully from the case design process which and most the outcome value simulation did analyzed. The climate data uses each metropolitan city distinguishes 20 average weather data, With measured values of horizontal solar radiation. The error scope appeared with 0.1%~6.7%. Variable of module arrangement Azimuth and angle of inclination of module and comparison group Module on due south direction angle of inclination $45^{\circ}$ day time set with the yearly average solar radiation quantity which receives. The result When the case comparison group which arranges a solar storehouse module with optimum environment and comparing until the minimum 1.4% - maximum 10.9% the solar radiation quantity difference appears with the thing, metropolitan city distinguishes considers the case solar radiation quantity which will arrange a photovoltaic module and that must establish with optimum environment judges.

• The Korean Journal of Physiology
• /
• v.11 no.2
• /
• pp.41-43
• /
• 1977

In pulmonary function which is important place which national physical power, in maximal grade of physical power, and end growth and development whom aged 20 years old that whole members 74 students, and taken pulmonary functions examination records, and took as the following results. 1) Frequency of breathing: Pertaining of the frequency of breathing are about form 15, to 16 times per minute at male and female students. 2) Vital capacity: Measures of vital capacity are in case of male students, whom was about 4.3 liter, and female students was about 3.6, liter which different between male and female students was more low quantity at female students with comparison male students. 3) Tidal volume: Pertaining of the volume are in case of male students, whom was 521ml, and female students was 497m1, and was slightly low quantity at female students with comparison male students, 4) Breathing holding time: Breathing holding time are in case of male students, whom was 64 sec, and female students was 55 sec, and was sbout 10 sec more high quantity at male students than female students.

• Earthquakes and Structures
• /
• v.7 no.3
• /
• pp.295-315
• /
• 2014

This paper presents the results of an analytical study on seismic reliability of viscoelastically damped frame systems in comparison with that of conventional moment resisting frame systems. In order to exhibit the reliability of the frame systems with viscoelastic dampers, seismic reliability analyses were carried out for steel framed buildings, 5 and 12 storeys in height, designed as: (a) Case 1: Conventional moment resisting frame, (b) Case 2: Frame with viscoelastic dampers providing supplemental effective damping ratio of 10%, and (c) Case 3: Frame with viscoelastic dampers providing supplemental effective damping ratio of 20%. Nonlinear time history analyses were utilized to develop seismic fragility curves whilst monitoring various performance objectives. To obtain robust estimators of the seismic reliability, a database including 15 natural earthquake ground motion records with markedly different characteristics was employed in the fragility analysis. The results indicate that depending upon the supplemental effective damping ratio, frames designed with viscoelastic dampers have considerably lower annual probability of exceedance of performance limit states for structural components, showing up to a five-fold reduction in comparison to conventionally designed moment resisting frame system.

• Korean Journal of Geomatics
• /
• v.1 no.1
• /
• pp.1-5
• /
• 2001

This paper presents an investigation into the operational comparison of SPOT triangulation to build GCP library by analytical plotter and DPW (digital photogrammetric workstation). GCP database derived from current SPOT images can be used to other image sensors of satellite, if any reasons, such as lack of topographic maps or GCPs. But, general formulation of a photogrammetric process for GCP measurement has to take care of the scene interpretation problem. There are two classical methods depending on whether an analytical plotter or DPW is being used. Regardless of the method used, the measurement of GCPs is the weakest point in the automation of photogrammetric orientation procedures. To make an operational comparison, five models of SPOT panchromatic images (level 1A) and negative films (level 1AP) were used. Ten images and film products were used for the five GRS areas. Photogrammetric measurements were carried out in a manual mode on P2 analytical plotter and LH Systems DPW770. We presented an approach for exterior orientation of SPOT images, which was based on the use of approximately eighty national geodetic control points as GCPs which located on the summit of the mountain. Using sixteen well-spaced geodetic control points per model, all segments consistently showed RMS error just below the pixel at the check points in analytical instrument. In the case of DPW, half of the ground controls could not found or distinguished exactly when we displayed the image on the computer monitor. Experiment results showed that the RMS errors with DPW test was fluctuated case by case. And the magnitudes of the errors were reached more than three pixels due to the lack of image interpretation capability. It showed that the geodetic control points is not suitable as the ground control points in DPW for modeling the SPOT image.

• Human Ecology Research
• /
• v.54 no.3
• /
• pp.251-262
• /
• 2016

This study analyzes the relation of the consumption values and ethical fashion consumption behavior as well as other influential factors between Korean and German ethical consumers based on the 'Modified Theory of Planned Behavior.' A survey was conducted on female consumers in their 20s and 30s, who experienced ethical fashion consumption in Seoul and Berlin. A factor analysis, reliability analysis, F -test and multiple regression analysis were performed for model verification. The research results indicated that emotional value (in case of Korea) and functional value out of consumption values (in case of Germany) have significant effects in regards to the influence of consumption values on ethical self-identity. The effects of ethical self-identity on ethical fashion consumption behavior indicated that Korean ethical self-identity influenced the ethical fashion consumption behavior of moderating and simplicity and eco-friendly certification versus local consumption as well as above factors (in case of Germany) explained by ethical self-identity. Both variables had a negative moderating effect in Korea in regards to the moderating effects of social comparison and materialism in the relations of ethical self-identity and ethical fashion consumption behavior; however, only materialism was an influential factor in Germany. The results of the research variables by individualism/collectivism indicated that the horizontal-collectivism group showed the highest ethical self-identity along with the lowest materialism tendency that had a high point of consumption behavior towards local consumption. However, the vertical-individualism group was outstanding. The consumption behavior aimed at moderating and simplicity.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.339-342
• /
• 2003

This study is intended to investigate the influence of chemical admixture on bleeding of concrete. According to the results, the amount of bleeding with elapse of time does not make much difference in the case of naphthalene type water reducing agent(RN), Naphthalene type high performance water reducing agent(HN) and Melamine type high performance water reducing agent(HM), but it is largest in the case of Polycarbonic acid type high performance water reducing agent(HP). Bleeding speed also is highest in the case of HP in comparison with other chemical admixture. This prove that high performance water reducing agent like HP has little effect on fluidity of concrete, but influences the amount of bleeding more greatly, instead. As properties of hardened concrete, compressive strength makes no difference in the case of RN, HN and HM, but on the other hand, it increases in the case of HP due to a decrease of air content and the large amount of bleeding.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.7
• /
• pp.163-170
• /
• 2004

In order to automatically determine the sequences of block assembly operations in shipbuilding, a process planning system using case-based reasoning (CBR) is developed. A block-assembly planning problem is modeled as a constraint satisfaction problem where the precedence relations between operations are considered constraints. The process planning system generates an assembly sequence by adapting information such as solutions and constraints collected from similar cases retrieved from the case base. In order to find similar cases, the process planning system first matches the parts of the problem and the parts of each case based on their roles in the assembly, and then it matches the relations related to the parts-pairs. The part involved in more operations are considered more important. The process planning system is applied to simple examples fur verification and comparison.

• Journal of Positioning, Navigation, and Timing
• /
• v.6 no.3
• /
• pp.125-133
• /
• 2017

Time comparison is necessary for the verification and synchronization of the clock. Two-way satellite time and frequency (TWSTFT) is a method for time comparison over long distances. This method includes errors such as atmospheric effects, satellite motion, and environmental conditions. Ionospheric delay is one of the significant time comparison error in case of the carrier-phase TWSTFT (TWCP). Global Ionosphere Map (GIM) from Center for Orbit Determination in Europe (CODE) is used to compare with Bernese. Thin shell model of the ionosphere is used for the calculation of the Ionosphere Pierce Point (IPP) between stations and a GEO satellite. Korea Research Institute of Standards and Science (KRISS) and Koganei (KGNI) stations are used, and the analysis is conducted at 29 January 2017. Vertical Total Electron Content (VTEC) which is generated by Bernese at the latitude and longitude of the receiver by processing a Receiver Independent Exchange (RINEX) observation file that is generated from the receiver has demonstrated adequacy by showing similar variation trends with the CODE GIM. Bernese also has showed the capability to produce high resolution IONosphere map EXchange (IONEX) data compared to the CODE GIM. At each station IPP, VTEC difference in two stations showed absolute maximum 3.3 and 2.3 Total Electron Content Unit (TECU) in Bernese and GIM, respectively. The ionospheric delay of the TWCP has showed maximum 5.69 and 2.54 ps from Bernese and CODE GIM, respectively. Bernese could correct up to 6.29 ps in ionospheric delay rather than using CODE GIM. The peak-to-peak value of the ionospheric delay for TWCP in Bernese is about 10 ps, and this has to be eliminated to get high precision TWCP results. The $10^{-16}$ level uncertainty of atomic clock corresponds to 10 ps for 1 day averaging time, so time synchronization performance needs less than 10 ps. Current time synchronization of a satellite and ground station is about 2 ns level, but the smaller required performance, like less than 1 ns, the better. In this perspective, since the ionospheric delay could exceed over 100 ps in a long baseline different from this short baseline case, the elimination of the ionospheric delay is thought to be important for more high precision time synchronization of a satellite and ground station. This paper showed detailed method how to eliminate ionospheric delay for TWCP, and a specific case is applied by using this technique. Anyone could apply this method to establish high precision TWCP capability, and it is possible to use other software such as GIPSYOASIS and GPSTk. This TWCP could be applied in the high precision atomic clocks and used in the ground stations of the future domestic satellite navigation system.