• Journal of Korea Port Economic Association
• /
• v.37 no.1
• /
• pp.103-119
• /
• 2021

Ports in Korea have been increasing in terms of volume while they have performed functions and roles such as industrial ports in promoting industries of their hinterlands as well as commercial ports supporting imports and exports. Nevertheless, specialization degree is different from port to port by cargo type and the changes in cargo volume. This study aims to analyze the structural changes and the degree of concentration and specialization by cargo type and port between 2001 and 2020. Top 10 ports were analyzed in terms of traffic volume by categorizing liquid, dry, general cargo and containers. HHI(Herfindahl-Hirschman Index), LQ(Location Coefficient), and shift-share analysis were employed in order to identify the degree of concentration, specialization and changes in cargo volume by port and cargo type. As a result of the analysis, the degree of port concentration and specialization for each cargo of 4 categories have maintained a high level, and no significant difference were found in fluctuations over the past 20 years. As a result of calculating the flucation of cargo volume through the shift-share analysis, the growth rate of liquid cargo was high in Yeosu Gwangyang Port, Pyeongtaek Dangjin Port in dry cargo, and Busan Port in general cargo and container ports. The result implies that it is not expected that the structural changes including degree of cargo concentration, specialization and relative fluctuation of cargo volume is significant in Korean ports in the future since the effects of economies of scale and clustering were achieved to the great degree.

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.2
• /
• pp.109-117
• /
• 2022

Membrane panels are installed in LNG cargo-hold in order to endure extremely low temperature LNG. Although there are several types of membranes around the world, Korean LNG cargo containment system is developing to accomplish technology independence from the other countries. The membrane panel of Korean LNG cargo containment system is composed of corrugation and flat sheets which are arranged asymmetrically. It is very important to reduce the number of the type of corrugation sheet because a mold is required as much as the type of the corrugation sheet. Therefore, we proposed an optimization method to minimize the type of the corrugation sheet. For this method, the number of pitches, which is the distance between the centers of two corrugation sheets should be minimized. We also developed optimized arrangement procedure of the flats simultaneously. Finally, the developed optimization program is applied to 174K LNG cargo hold, and the minimum pitch size is found.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2005.06a
• /
• pp.84-89
• /
• 2005

The double hull VLCC(Very Large Crude Oil Tanker) have been designed to have each four(4) longitudinal bulkheads and transverse bulkheads in general. Actually, the inside longitudinal bulkheads among four(4) longitudinal bulkheads, which are extended up to the end of the aft cargo hold for continuity of the members, have been designed with knuckled type inboard due to the narrowed hull shape at bottom region, but sometimes the straight type of longitudinal bulkheads were adopted based on the degree of the hull lines shape. However, regardless the type of longitudinal bulkheads, inside and outside longitudinal bulkheads conflict each other in aft cargo hold region This makes the structure more complex thus giving difficulties to structural design and production. Recently, a vessel of straight type was reported to have cracks on bracket end and tripping bracket toe in aft cargo hold region. As a solution to this problem, in designing the first 60m Beam VLCC, DSME developed a new cargo hold structure which is good in production and structural point of view by structural strength and fatigue analysis of fore and aft cargo hold.

• Journal of information and communication convergence engineering
• /
• v.6 no.3
• /
• pp.239-244
• /
• 2008

Cargo tracking issue on train transportation is challenging area because of long distance haulage, theft, terror attack and customer service. This paper aims at evaluating various cargo tracking systems in terms of cost and technology. The contents of this paper consist of the research trend of cargo tracking system in the railroad transportation and reviewing of technical alternatives in cost and service side. GNSS and RFID are reviewed as location tracking technology, Internet and Satellite technology like INMASAT and Low Earth Orbit are also reviewed as communication infrastructure. This paper selects cost and service factors in two alternatives of GNSS-Satellite and RFID-Internet, among GNSS-Internet, GNSS, Satellite, RFID-Internet, RFID-Satellite and evaluate each alternative in terms of cost and service. In a result, in terms of cost, RFID-Internet type is superior to GNSS-Satellite type, but in service GNSS-Satellite type is preferred to RFID-Internet in point of area coverage and service coverage.

• Journal of Navigation and Port Research
• /
• v.43 no.6
• /
• pp.444-449
• /
• 2019

The "Standard on Cargo Stowage and Securing" implemented to safely stow and secure the cargo of international shipping vessels and domestic car ferries, has also been applied to general cargo ships transported between domestic ports since J anuary 2018. As a result, a new type of cargo, such as a non-standardized steel box transported by general cargo ships to major ports in Korea from Jeju Island in Korea, must be factored as the method of safe stowage and securing according to the legal classification of cargo. This study analyzed the legal status of a steel box by analyzing the actual size, shape of steel box through field verification, collection of data from relevant agencies and finally proposed the methods of safe stowage and securing for a steel box in the cargo holds of general cargo ships. According to the relevant domestic laws and international regulations, steel boxes could be classified as pallette boxes with protective outer packing, a type of non-standardized cargo. Additionally, when a steel box is loaded into the cargo hold of general cargo ships, a method of loading and transporting them must be factored so that there is no gap in the cargo hold of ships. Verification of the safety of the tightly loading and transportation measures in the reviewed cargo hold was verified through safety of the hull structure and securing of the ship's stability. As a result of verification of the safety of the hull structure, the value of the structural strength on both sides and the floor of the cargo hold for the total weight of cargo that can be loaded in the cargo hold was satisfied, and the value of the ship's stability was satisfied with the value of GoM and the restoration of the three cross-sectional stability curve areas.

• Journal of the Society of Naval Architects of Korea
• /
• v.60 no.4
• /
• pp.213-221
• /
• 2023

The demand for Liquefied Natural Gas (LNG) carriers and LNG-fueled ships has significantly increased in recent years due to the sulfur-oxide emission regulations by the International Maritime Organization (IMO). The main goal of this paper is to introduce the process for the Engineering Critical Assessment (ECA) of IMO independent type-B cargo tanks made from 9% nickel alloy. A methodology proposed by the British Standard was used to conduct ECA for any structure with initial flaws. Based on this standard, a Matlab code was developed to perform ECA. Coarse mesh Finite Element Analysis (FEA) was performed on an independent type-B LNG cargo tank with a capacity of 15,000 m³. The location with the highest development of maximum principal stress was identified at the bottom of the cargo tank. Fine mesh FEA was performed to obtain the stress range required for ECA. The dynamic cargo tank loads used for FEA were determined using some ship rules presented by Det Norske Veritas. As a result of performing a 20-year long-term crack propagation analysis with a semi-elliptical surface crack, the fracture-to-yield ratio exceeded the Fracture Assessment Line (FAL) and some structural reinforcement was necessary. Performing a 15-day short-term crack propagation analysis, the fracture-to-yield ratio remained within the FAL, and no significant LNG leaks were expected. This paper is believed to provide a guide for performing ECA of LNG cargo tanks in the future by providing the basic theory and application sample necessary to perform ECA.

• Journal of Korean Port Research
• /
• v.3 no.1
• /
• pp.35-55
• /
• 1989

Today, about 99% of total import and export cargo in Korea is being transported through the port. The general trends of cargo handling show increases in capacity and speed, In order to cope with these trends, it is not only required to raise the efficiencies of port operation and function but also necessary to decide the optimal amount of the skilled labor force for cargo handling in the port. Cargo handling in the port is basically relied on the cargo handling facilities. Therefore, it is very important to reserve the amount of labor force for cargo handling system has been developed up to a certain level but the personnel management system which is the superior structure has not been followed well. In this study, therefore, we show a method to determine the required amount of labor force for cargo handling considering the amount of cargo and type of cargo handling work per each cargo, and the optimal amount labor force in cope with the fluctuation of the basic cargo handling labor force with respect to the time of in and out cargo flow in the viewpoint of minimizing the expences due to reservation of extra labor force than needed and firing employment of labor force using the Dynamic Programming. The derived algorithm is introduced into the computer simulation for Pusan port with the analyzed real data such as amount of cargo handling in the port with respect to working hour, cargo capacity, working step, the ratio of cargo handling facility and actual number of workers and we estimated the required labor force. As a result of analysis the labor force of Pusan port showed the over-employment such as maximum 21.4%, minimum 8.2% when we assumed that the averages of actual working hours and days were 8 hours in a day and 20 day in a month.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.3
• /
• pp.116-130
• /
• 2023

Expressways play pivotal roles in cargo transportation because of their superior accessibility and mobility compared to rail and air. On the other hand, there is a limit to the accurate calculation of cargo transportation performance using existing highways owing to the mixture of vehicle types and difficulty in identifying cargo loads of individual cargo vehicles. This paper presents an algorithm for calculating more reliable cargo transportation performance using big data. The traffic performance (veh·km/day) was derived using the data collected from Toll Collecting System. The average tolerance weight for each vehicle type and the cargo load unit (ton/unit) considering it was calculated using vehicle specification information data and high-speed and low-speed axis data. This study calculated the cargo transportation performance by section and type using various online integrated highway data and presented a method for calculating the transportation performance by linking open business offices and private highways.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.23 no.2
• /
• pp.84-88
• /
• 2015

In this study, we surveyed the CAO Dangerous Goods, the Cargo Compartment Classification, IATA DGR(Dangerous Goods Regulations), ICAO Doc. 9284 and the regulation for the Air Transport of Dangerous Goods by Ministry of land Infrastructure and Transport of Korea. We found that the differences between these regulations. Applied according to the type of dangerous goods cargo compartment Class is determined. These regulations have caused confusion was due to the difference, because of the need for revision and amendment regulations were analyzed.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.19-20
• /
• 2021

Domestic car ferries do not operate a dedicated information system for cargo loading and management, It is impossible to arrange according to the cargo type and quantity at the time of cargo reservation due to restrictions such as the need to comply with the cargo layout drawings in advance approved by the Korean Register. For this reason, this is a study to utilize similar information systems in operation in container ships and terminals for the purpose of improving cargo shipment management tasks for car ferries.