• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.1
• /
• pp.145-151
• /
• 2017

In this paper, we propose the design and implementation of the system that is predicting the failure of ballast water treatment system by analysing its sensor datum and is reserving the most effective service center for sellecting the repair location on the way to the destination port. These data are collected in real time during draining or filling up the sea water from/to the ship, and it is essential to preliminarily repair the equipment showing unstable characteristics by analyzing the normal and abnormal data characteristics. We proposed a software platform for predicting and repairing faults by selecting the most efficient repair center based on this e-Navigation while the vessel is navigating to the next destination port. This system, as announced by the IMO Convention for the Prevention of Marine Pollution in 2017, provides a stable economic impact from stable cargo operation and stable out/in from/to port and marine ecosystem.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.1
• /
• pp.34-46
• /
• 2016

This study analyzes inspection results of ships by Port State Control. Particularly, this research focuses on a detention trend of vessels that registered to Korean Register of Shipping. In order to conduct this research, we have searched 170 ships that got a detention with a Code-30 within recent 46 months period. The deficiencies of the detentions are inspected by ship types, ship years, flags, ports inspected, and criteria. Moreover, we categorized the deficiencies for the detentions into 17 types for internal and external inspections. As the results of the comparison study, bulk and general cargo carriers dominate the portion of detentions by almost 66 percent. Self-induced detention due to a lack of preparation by crews and company support are the main reasons of repeated detentions from the same type ships. Ships between six and ten years old show the lowest detention rate by 4 percent whereas ships less than five years old generate the highest detention rate by 22 percent. The main categories of the detentions from ships less than 5 years old are a lack of documentation and certification, and the clues support our opinion that owners and crews may neglect to prepare the inspections because their strong confidence for the ship condition due to young ship age. As a result of a great effort of Korean government and shipping companies to reduce a detention rate, the detention rate has been recently reduced to 0.3 percent. The results also require companies with the flag of convenience ships to spend more effort to reduce the detention rate, too. We expect that using social networking service by Korea Register will lower the detention rate by sharing relevant information real-time to ships and owners.

• Journal of Navigation and Port Research
• /
• v.28 no.5
• /
• pp.405-411
• /
• 2004

The aim of this research is to analyze actual condition of port logistics industries in Busan For this, this research identified logistics, based on the concept and definition of port and logistics, and then, divided them into six categories, transportation, cargo handling, storage, service, packing, and information The results of the paper are, first, it was found that there are much differences among industries, in revenue scale, and number of employee and firm Secondly, it indicated that actual occupation rate of these industries in regional economy was not high, except for transportation related industries. Finally, from these findings, this research suggested that it was necessary to build different policies according to competitiveness level of firms, and strategies to promote many firms with low occupation rate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.1954-1962
• /
• 2012

Recently the increase in the exchange of goods between Europe and Asia caused by social and economic factors creates good opportunities for railways. At the same time, however, it becomes an enormous challenge for railway transport. There are different rail track gauges (i.e narrow/standard/broad gauge) on the continental transportation between Korea (TKR) and Eurasian (TCR/TSR). The existence of various track gauges is one of obstacles preventing the smooth flow of goods by rail. The transferring process system from one track gauge to another could vary with the types of cargo. Service operation of these systems has a decisive effect on working time and cost of storage and transshipment facilities at border crossings. In relation to the above-mentioned factors, it is important to examine the comparison between different methods of transferring goods in different track gauges. In this study, it was performed to evaluate the effectiveness of continental railway transportation systems through analysis scenarios and to suggest technical factors of them.

• Journal of Korea Port Economic Association
• /
• v.27 no.3
• /
• pp.247-272
• /
• 2011

Because of operating and ordering vessels over 10,000 TEU, the strategic alliance between liner shipping companies will be diversified and activated more briskly to secure cargo quantities, minimize costs, secure profits, improve service quality and manage stable business. Many of prior studies concerning strategic alliance are carried out to clarify success factors, motives or to explain how to select a good partner for success. But over 70% of strategic alliance has been resulted in failure. Because failures of strategic alliance occur much more frequently than success, negative effect factors in strategic alliance have to be measured and be adapted to changing conditions in the shipping market. To improve negative effect factors, shipping companies should make an effort to establish reliable relationships between partners and suppress claims by clearing off imprecise contract terms. And it is necessary to increase satisfaction of each individuals and minimize complexity occurred due to the exterior relationships for the successful strategic alliance.

• Journal of Korea Port Economic Association
• /
• v.27 no.3
• /
• pp.231-245
• /
• 2011

Pyeongtaek Port is becoming a specialized for importing or exporting cars. In 2010, Pyeongtaek Port became the major port, out of the 31 ports in Korea, for import and export of cars. Usage of this port was especially high for imported cars. In 2011, more than 1 million cars are expected to be imported or exported via Pyeongtaek Port. This research analyses the factors for selecting Pyeongtaek Port for imported cars and recommendations required to improve Pyeongtaek Port. To do this, questionnaires were given to 14 imported car companies that currently, July 2011, use Pyeongtaek Port and used AHP criteria to asses the importances of each factors. According to this research, the most important determinant for the use of Pyeongtaek Port is 'Port Location' followed by 'Port Cost', 'Port Facility', 'Port Service', 'Port Marketing' and 'Port Cargo Volume', in the order of importance. Also, imported car companies say that the factor in need for the most urgent improvement is 'Port Facilities' in Pyeongtaek Port.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.2
• /
• pp.60-67
• /
• 2017

A baggage handling system (BHS) in airport is an unified system for moving the passengers' baggage in designated time. Input baggage from the check-in counter travels to the baggage claim area or cargo handling terminal through this system. In particular, entryway BHS consists of conveyors, X-ray and sorters such as tilt-tray to send the baggage to departing airplane and it could have various problems for handling certain amount of baggage in restricted time such as baggage jamming at certain merge point. This causes systemic error such as delay of the time, omissions of the baggage and even breakdown of the equipment and inefficiency. Also the increasing maximum time of the baggage passing through the BHS could delay the flight schedule and finally decrease the service level. Thus, the algorithm for controlling the flow of the merge is essential to the system. The window reservation algorithm is the one of the most frequently used methods to control the merge configuration. Above all, the reserve location, so called reserve ahead point, that allocates the window is important for the performance of the algorithm. We propose the modified window reservation algorithm and the best reserve locations by changing the reserve ahead point in the induction conveyors. The effect of various reserve ahead points such as the capacity and utility of the system were analyzed and the most effective reserve ahead point combination was found. The total baggage processing time and the utilization of the tilt-tray are properly considered when choosing the optimal Reserve ahead point combination. In the layout of this study, the configuration of four conveyors merged into one tilt-tray is studied and simulation analysis is done by AutoMod(R), 3D simulation software. Through the simulation, the window reservation algorithm is effectively operated with the best combination of reserve ahead point which reduces the maximum baggage travel time.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.64
• /
• pp.65-97
• /
• 2014

Arbitration is the dispute methods for speedy and economic resolutions in international commercial areas. In maritime disputes cases in East Asia, Korea and Japan are the regional benefits to cover and deal with the maritime cases on arbitration. And Korea and Japan are the competitive maritime industry for heavy shipbuilding industry, cargo carrier, processing and transhipment service on ports, and ship financial services in national competitive areas. Japan is the Tokyo maritime arbitration commission(TOMAC) as an uniquely capable of dealing with arbitrations involving problems arising in the sea field. TOMAC provides amended its arbitration rules 2014 aiming at matching with the maritime disputes circumstances with three maritime arbitration rules as ordinary rules, simplified rules and the rules of small claims arbitration procedure. KCAB however, as the unique commercial arbitration board in Korea is dealing on all of the commercial disputes on only the international commercial arbitration rules in 2011. Though KCAB is dealt with maritime dispute cases on international arbitration rules in Korea, it is small and simple compared with TOMAC in Japan. Maritime disputes are highly complicated and embroiled with multi-parties contract and subcontracts arising under contracts relating to bills of lading, charter parties, sale and purchase of ships, shipbuilding, ship financing and so forth. This paper is to provides a discussion and comparison on recently arbitration rules focus on the maritime aspects on Korea and Japan. We need to consider to make an independent and special institute and maritime arbitration rules including the multiparty consolidation and med-arb provisions for handling the disputes and resolution of maritime conflict cases in Korea.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.4
• /
• pp.75-82
• /
• 2001

Static loadings on ship structure induced either by water pressure before service such as a tank test and ballasting or by cargo pressure during first laden voyage cause relatively much greater stress than dynamic loadings induced by wave. With these static pre-loadings, the initial residual stresses around welded joint, where fatigue strength is concerned(in most cases, where stress concentration occurs) are expected to be shaken-down in a great extent by the elasto-plastic deformation behavior of material. Therefore, it is more resonable to assess the fatigue strength of ship structure with S-N data which have taken into account the effect of shaken-down residual stresses(re-distributed stresses) on the fatigue strength. In this research work, the re-distribution of residual stresses by the tensile pre-loading is measured using an ordinary sectioning method for specimens of padding plate weldment. Fatigue tests are performed also to evaluate the fatigue strength of the both as-welded and pre-loaded specimens.

• Journal of Korea Port Economic Association
• /
• v.37 no.1
• /
• pp.179-196
• /
• 2021

Port congestion rate at Busan Port has increased for three years. Port congestion causes container reconditioning, which increases the dockyard labor's work intensity and ship owner's waiting time. If congestion is prolonged, it can cause a drop in port service levels. Therefore, this study proposed an anomaly detection method using ARIMA(Autoregressive Integrated Moving Average) model with the daily volume data from 2013 to 2020. Most of the research that predicts port volume is mainly focusing on long-term forecasting. Furthermore, studies suggesting methods to utilize demand forecasting in terms of port operations are hard to find. Therefore, this study proposes a way to use daily demand forecasting for port anomaly detection to solve the congestion problem at Busan port.