• Journal of Korea Port Economic Association
• /
• v.25 no.3
• /
• pp.139-164
• /
• 2009

The purpose of this paper is to investigate the value chain efficiency of Korean port investment by using the newly developed multi-year and multi-stage value chain efficiency model of DEA(Data Envelopment Analysis). Inputs[port investment amount, cargo handling capacity, and berthing capacity], and outputs[cargo handling amount, number of ship calls, revenue, and score of customer service satisfaction] are used during 14 years(1994-2007) for 20 Korean seaports by using two kinds of DEA models. Empirical main results are as follows: First, Model 1 shows that the ranking order of multi-stage value chain efficiency is Stage 2, Stage 3-1, Stage 1, and Stage 3-2. And according to the value chain average efficiency scores, ranking order is stages 2, 1, 3-1, and 3-2. In Model 2, 3(Incheon, Mogpo, and Jeju) out of 9 ports show the ranking order of Stages 2, 3-2, 3-1, and 1. And value chain average efficiency scores rank in order of Stages 2, 3-2, 3-1, and 1. Second, the difference among the value chain efficiency scores of each stage comes from the efficiency deterioration of all ports except Stages 2 and 1 in Model 1. In Model 2, value chain efficiency scores among the Stages 3-1, 3-2 compared to Stage 1 were deteriorated. The main policy implication based on the findings of this study is that the manager of port investment and management of Ministry of Land, Transport and Maritime Affairs in Korea should introduce the multi-year, multi-stage value chain efficiency method for deciding the port investment amount and evaluating the effect of port investment after considering the empirical results of this paper carefully.

• Fire Science and Engineering
• /
• v.31 no.3
• /
• pp.1-10
• /
• 2017

This study examined the risk of accidents when handling hazardous materials in hazardous materials storage facilities without safety facilities. In the case of illegal dangerous cargo containers, the burning rate is very fast in the case of fire, which leads to explosions, that are damaging and difficult to control. In addition, accidents that occur in flammable liquid hazardous materials are caused mostly by accidents that occur in the space due to leakage. Therefore, the variables that affect these accidents were derived and the influence of these variables was investigated. Numerical and computational fluid dynamics programs were used to obtain the following final results. First, when a flammable liquid leaks into a specific space, it is influenced by temperature and relative humidity until a certain concentration (lower limit of combustion) is reached. In the case of temperature, it was found that the reaching time was shorter than the flash point In addition, the effect of variables on pool fire accidents of leakage tanks is somewhat different, but the variables that have the largest influence are the wind speed. Therefore, it is expected that the results of this study will be used as basic data for similar numerical analysis and it will provide useful numerical information about the accidental leakage of hazardous materials under various research conditions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.720-725
• /
• 2016

This study examined how the APU noise of an aircraft influences the work efficiency and stress of airport ramp workers. A survey of airport ramp workers was conducted and the results analyzed. In the demographic analysis, men outnumbered women - accounting for 86% of the survey target - and 80% of the respondents were found to be employees with less than 15 years of work experience. The occupational cluster of the total of 160 respondents included 41 aircraft maintenance workers, 70 ground staff (Cargo, Water and Waste services), 19 ramp coordinators, 18 ramp controllers and 12 catering Service workers. The ground staff were the most prevalent, constituting 44% of the occupational cluster. Regarding the APU noise, 74% of the respondents answered that the environment was "always noisy", while 26% answered that it was "sometimes noisy". 85% answered that they are sensitive to and put under stress by the APU noise, while the majority of the respondents answered that the APU noise degrades their work efficiency. In conclusion, this study examined the effect of APU noise on the work efficiency and stress of airport ramp workers by analyzing the survey data by Regression and Chi-square analysis.

• Journal of Distribution Science
• /
• v.10 no.10
• /
• pp.25-33
• /
• 2012

Purpose - The Garak agricultural wholesale market ('Garak Market') plays a central role in the distribution of agricultural products in Korea and is important in connecting consumers with producers. However, problems regarding inefficiencies and the high-cost structure of the wholesale market's distribution/logistical system are being raised in relation to severe competition among retailers. Furthermore, the service needs of retailers and market users are not being fulfilled due to the inconsistency of the wholesale market's functions and facilities, thus reducing the competitiveness of the market. In this regard, innovative changes are being requested of the agricultural wholesale market according to changes in the agricultural product distribution environment. In particular, the lack of unloading facilities and the outdated unloading system of the wholesale market must be improved to enhance system efficiency. Research design, data, and methodology - This study observed the problems of the unloading system of the agricultural wholesale market in order to present relevant measures for improvement. The need for unloading auctions was also researched in this study. The survey of 70 forwarders belonging to the producing district distributor association of the Garak market was conducted by post. Additionally, 20 auction dealers and 59 shippers and transporters were individually interviewed. The survey on the need for unloading auctions used five-point Likert Scales. The statistical analysis was conducted with SPSS WIN 12.0 software. Results - First, the wholesale market must employ members of the unloading labor union to allow these employees to directly manage the unloading process. Second, it is crucial to revise regulations to ensure that the principal agent pays the unloading cost according to the standard unloading cost system. Third, the vehicle auction carried out for certain vegetable products must be converted to the unloaded auction system. According to the related interviews with the wholesale market's distribution agents, whereas shippers and transporters recognized the need for unloaded auctions, auction dealers tend to have a negative view of this system. Furthermore, the stated reasons in favor of unloaded cabbage, radish, and other vegetable auctions were prevention of constraint, creation of transparent trade conditions, and reduction of corrected seller tickets. Many of the respondents answered that the transport cost reduction rate in unloaded auctions must be below 20%. Fourth, the unloading system must be mechanized and a detailed, reasonable plan must be provided to settle the existing conflict with the unloading labor union. Conclusions - The proposals in this study are expected to play an important role in improving the cargo handling system of the wholesale agricultural product market in the future. Improving the system is expected to help shore up the competitiveness of the industry. If all the related bodies closely cooperate with each other and work harder, taking advantage of the synergies created by the facility modernization project, the Garak market will play a pivotal role in the distribution of agricultural products.

• Journal of Korea Port Economic Association
• /
• v.27 no.3
• /
• pp.273-288
• /
• 2011

Recently, the rankings of Korean container ports in terms of container handling cargo volume were plunged down due to the emerging Chinese ports. The efficient container ports strategies which increase container port competitiveness were requested. In this respect, it is urgently required to draw out constituent factors for Port Logistics, weigh these factors, and finally focus on improving the suggested factors. The aim of this paper is to evaluate weight and priority values for 'inner consisted factors' and 'outer requested factors' of port logistics by using the AHP(Analytic Hierarchy Process) method. As for the analysis regarding the inner consisted factors, the results were shown as follows: a storage and handling system (0.288) as the first rank; an information system of port logistics (0.210) as the second rank; an inland intermodal system (0.189) as the third rank; a ship's entering and departuring system (0.184) as the fourth rank, and a ship's berthing system (0.129) as the fifth rank. In terms of analysis regarding outer requested factors, the results came out as follows: a logistics cost (0.360) as the first rank; a port service (0.128) as the second rank; a connectivity (0.118) as the third rank; a hinterland condition (0.116) as the fourth rank; an convenience (0.106) as the fifth rank; a regional center (0.095) as the sixth rank, and an availability (0.077) as the seventh rank. For analyzing the priorities changes in constituent factors, the comparison of results between the year 2007 and the year 2011 was done. As the results, among inner consisted factors, 'information system of port logistics' was ranked first in the year 2007 while 'a storage and handling system' became the most important factor in the year 2011. Among the inner consisted factors, however, the logistics cost was the important factor in 2007 and 2011, respectively.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.3
• /
• pp.211-217
• /
• 2008

Natural environment, topographical conditions and marine traffic flows were investigated and questionnaire surveys were performed for the purpose of understanding the cause of marine accidents. The frequent cases of ships' dragging have happened at the anchorages of E-1, E-2 and E-3. The anchorage area is insufficient for the accommodation of a number of ships, the dolphins at the nearby piers are located near a narrow fairway. SBMs' are positioned too close to the fairway. It shows that many crossing marine traffic flows occur in all areas of the port. Marine casualties are concentrated mainly at No. 1 fairway, M1-M7 waters close to the dolphins and Gwanjeolgot, "E" anchorage and the waters close to the fairway "come and go" areas. The marine traffic flow is mainly caused by the ships' movement at the inter-port and most of the ships are the dangerous cargo carriers. And small ships like the tug-barge are moving disorderly in the ports. Furthermore, the fairway‘s layout is crossing each other. Questionnaire surveys of the users and experts shows that the LANBY that can distinguish the fairway of "come and go" ports is required.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.9
• /
• pp.2093-2099
• /
• 2015

To prevent damage to the cargo, monitoring and remote management for reefer containers is necessary. The currently used remote monitoring service is the Power Cable Transmission(PCT) system, which is recommended by the International Maritime Organization(IMO). However, this system is not widely used because it requires a separate PCT infrastructure and is susceptible to data loss problems. To solve this problem, this study introduces the "IoT-based reefer container management system", The proposed system which is attached to reefer container collects and transmits data on the temperature, status and location of reefer container to middleware using RS-232 communication and WCDMA/GSM communication. Middleware is store the data received in the database and provide information to user in real time through the web and mobile program. At this time, users able to change setting temperature in real time from a distant place through the web program. This study tested by transit about shipment of strawberries to monitor and analyze and check the system's overall effectiveness.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.541-549
• /
• 2018

This paper deals with the braking dynamic behavior of diesel electric locomotive pulling domestic cargo and passenger vehicles. Friction coefficient, pneumatic pressure, and running resistance affecting the braking system were tested. For the friction coefficient, the Dynamo test was performed with reference to UIC 541-4. The results are analyzed by multivariate regression and the relationship between braking force and ititial velocity is presented. The pneumatic pressure were classified into service braking and emergency braking. In order to reflect the characteristics of the brake valve and piping, the pressure rising over time was measured in the vehicle. In order to reflect the external force acting on the vehicle, we carried out the test of EN 14067-4 and presented the second order polynomial formula on a running resistance. The running resistance test results were compared with other countries. The dynamic behavior of a diesel electric locomotive running on a straight flat track based on vehicle resources, friction coefficient, braking pressure, and running resistance is simulated using the time integration presented in EN 14531-1. The simulation results were compared and verified with the vehicle braking test results. The results of this study can be used to analyze the dynamic braking behavior of a train. Also, it is expected that various parameters affecting braking in vehicle design can be analyzed and used as basic data for braking performance improvement.

• Journal of Digital Convergence
• /
• v.17 no.4
• /
• pp.95-105
• /
• 2019

The failure of company management that does not overcome the recession of shipping economy has negative impact on front-end and back-end industries in relation to shipping industry overall. This study aims to derive a measure of government policy support for win-win of ship owners and shippers by performing a survey with experts in ship owners, shippers, and port-related institutions. This study employed a consistent fuzzy preference relation (CFPR) method to provide the priority of government policies. The study results showed that out of all 14 policies, the policy perceived most important was "expansion of participation in share of shipping company or ships of shipper (0.102)" followed by "strengthening of national shipper-centered service quality (0.101)", and "providing a long-term transportation contract model of container cargo (0.085)". To recover the Korean shipping industry via win-win of ship owners and shipper, the policy enforcement is important through correct government policy establishment and priority selection. In this regard, this study contributed to proposing policies and priority of the policies. For the future study, detailed analysis on comparison of perception difference among stakeholders in the shipping industry is needed.

• The Journal of the Korea Contents Association
• /
• v.21 no.2
• /
• pp.121-129
• /
• 2021

In this study, we try to minimize the tariff risk by constructing a hazardous cargo screening model by applying Association Rule Mining, one of the data mining techniques. For this, the risk level between supply chains is calculated using the Apriori Algorithm, which is an association analysis algorithm, using the big data of the import declaration form of the Korea Customs Service(KCS). We perform data preprocessing and association rule mining to generate a model to be used in screening the supply chain. In the preprocessing process, we extract the attributes required for rule generation from the import declaration data after the error removing process. Then, we generate the rules by using the extracted attributes as inputs to the Apriori algorithm. The generated association rule model is loaded in the KCS screening system. When the import declaration which should be checked is received, the screening system refers to the model and returns the confidence value based on the supply chain information on the import declaration data. The result will be used to determine whether to check the import case. The 5-fold cross-validation of 16.6% precision and 33.8% recall showed that import declaration data for 2 years and 6 months were divided into learning data and test data. This is a result that is about 3.4 times higher in precision and 1.5 times higher in recall than frequency-based methods. This confirms that the proposed method is an effective way to reduce tariff risks.