• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.59-60
• /
• 2013

In this paper, we implemented a digital doorlock using microprocessor Atemega128 made in Atmel. We added RFID reader to identify different existing Doorlock. To operate the system, first, if RFID reader recognize card, LCD is used to operate password input message. Second, if password is correct, door is opened. But if password is incorrect, door will not be open. To extend security intensity for opening door key, we used RFID module and can operate it easily.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1445-1447
• /
• 2004

In recent years, the smart card is widely applied for wireless communication, tracking, transportation logistics, diagnostic monitoring, access control and security. RF-ID system is universally applicable. Passive RF-ID system consists of reader and passive tag. The reader transmits energy and simple information to a tag by wireless and the power from the reader is transformed for controller, FRAM and Bluetooth module. In this paper, proposed for the improvement of wireless power transmission and demonstrated the propriety through experiments in several conditions.

• The Journal of Korea Robotics Society
• /
• v.6 no.2
• /
• pp.147-155
• /
• 2011

This paper presents an edutainment robot for young children. The edutainment robot called 'Mon-e' has developed by the Central R&D Laboratory at KT. The main services of the Mon-E robot are autonomous moving service, object card and story book telling service and videophone service. The RFID technology was introduced for easy interface to young children. The face of Mon-E robot is mounted with an RFID reader. The RFID tag is pasted on story book and object card. If you approach a book or an object card to the face of Mon-E, the Mon-E robot recognizes the identified code and plays its service. In autonomous moving, if the Mon-E robot meets obstacles, it moves back and turns left or right or half rotation. In videophone service, if young children approach an RFID card to the Mon-E, the Mon-E can make a call to the specific number, which is contained in the RFID card. The developed Mon-E robot has tested in real world environment and is evaluated young children and their parents. In the result of evaluation, the feeling of satisfaction was high to main services of Mon-E robot.

• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.412-414
• /
• 1999

The FSK demodulation module is the circuit which detects the data being transmitted from reader by FSK method. It doesn't use the PLL, and has lower power consumption and easier integration than conventional FSK detector using the PLL. So in a smart card, it is suitable to apply. In this study, the FSK demodulation module of the low power smart card is designed and analyzed.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.4
• /
• pp.183-190
• /
• 2017

This paper proposes a dynamic magnetic field emulator (DMFE), which can electrically emulate information for the magnetic stripes of most widely used credit cards. Payment transactions with most common credit cards are performed by reading the card's information, encoded in magnetic stripes, using the reader head of a point-of-sale (POS) system. A stripe-type permanent magnet is attached to the back side of the credit card, and information for payments or value-added service is reorganized by exposing it to strong magnetic field. The process of data recording and retrieving as stated above has been pointed out as a major cause of illegal credit card use, because the information on the magnetic stripe is always exposed, and is thus vulnerable to forgery or alteration. A dynamic magnetic field emulator displays card information only when necessary by using the principle of solenoidal magnets. The DMFE proposed in this paper can prevent fraudulent use if it is operated with a device, like a smart phone, or a separate user-authentication procedure. In addition, because it is possible to display various information as needed, it can be utilized for a smart multi-card application, in which information for multiple cards is stored in one card, and can be selected and used as needed. This paper introduces the necessity of the DMFE and its manufacturing principles. As a result, this study will be helpful for making various application cases in payment, which is a core area of the Fintech (a newly-coined word of finance and technology) industry.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1270-1272
• /
• 2003

Smart card system is being used in many countries to improve access to their transportation systems. Especially for subway system that typically see high volumes of passengers at specific times of the days, it's critical to find a ray to collect fares without unnecessarily delaying passengers. The card consists of antenna, modulation and demodulation block, power supply module and memory. The antenna receives the power and data signal from reader. The FRAM is used as the inner memory. And it is a non-volatile memory and complements the problems, that is high consumption and low data processing speed, of using conventional EEPROM in the passive smart cart. In this paper, we analyze and design the RF passive smart card to apply to the fare collection for the subway gate system.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.119-122
• /
• 2005

In this paper, we investigated the recognition range according to modulation index for the ISO(International Standards Organization) 14443 13.56MHz contactless Type B RFID(Radio Frequency IDentification) system. We measured recognition range with changing modulation index step by step from 5% to 24% where we used 4 samples of Type B transponder with different resonance frequencies between 13.838MHz and 17.200MHz. While gradually increasing a distance in vertical direction from the center of the reader antenna, we measured the distance where the transponder's PUPI(Pseudo Unique PICC(Proximity IC Card) Identifier) is recognized continuously during 10 seconds and the distance where the transponder's PUPI is recognized at least two times during 5 seconds. From the measurement results, we found that the best recognition ranges were achieved when the reader had modulation index between 11% and 14%.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.1
• /
• pp.53-59
• /
• 2011

In this paper, the implementation of a production control system has been studied in order to obtain Realtime Cost Calculation using an exact Machine Factor and Man Factor based on RFID reader data transferred through network. For the study, microprocessor built in the controller of production facilities is used and also RFID reader is built additionally. Control part, card reader used for check the beginning and ending working time of workers, and Machine Factor and Man Factor calculated are transferred to server via PLC transmission port, serial transmission port, or Ethernet transmission port. By using the system, the production cost or the production efficiency is calculated exactly. Therefore it is possible to improve production rate and cost reduction by the use of the proposed production control system.

• Journal of the Korea Society of Computer and Information
• /
• v.9 no.1
• /
• pp.71-77
• /
• 2004

In general, security server controls information of people who usually come to building. In order to exit and entrance, while they bring Identification card into contact with card reader, server admits them into building after asks whether their informations are or not in database. However if many People want to exit and entrance in all direction. it may give rise to a serious traffic congestion. Therefore the delay is due to server's overload. In this paper, we suggested IZA(Identification Zone Algorithm) in order to prevent of traffic congestion.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.543-548
• /
• 1994

This is the paper on the development of assemnly automation and visual inspection system for smart card reader connector. The automation consists of 3 main process injection, assembly and inspection. During the injection, the main pin of a reel. transferred under uniform tension, is cut with an injection interval and positioned precisely to an injection mold by roll feeder after injection. The main base is stacked to a magazine for main pin's exact positionning to a mold . For last effective production, The turn table and pick & place are driver with gears and came by a single monter. We developed the small parts handling technigue for stable supply of micro ist pin and 2nd pin and could determine the orientation and position of those pins. For reliable inspection, We used the vision system which examins the guality of arranged pins with a CCD camera. The connector models which can be manufactured with this system are 8 pin and 10 pin type. The user can select the connector model for production and adjust the torerable error range during the inspection of arranged pins.