• Journal of Microbiology and Biotechnology
• /
• 제4권1호
• /
• pp.41-48
• /
• 1994

The xylanase from alkali-tolerant Bacillus sp. YA-14 was purified to homogeneity by CM-cellulose, Sephadex G-50, and hydroxyapatite column chromatographies. The molecular weight of the purified enzyme was estimated to be 20, 000 Da by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The purified enzyme slightly hydrolyzed carboxymethyl cellulose and Avicel, but did not hydrolyze soluble starch, dextran, pullulan, and ${\rho}-nitrophenyl-{\beta}$-D-xylopyranoside. The maximum degree of hydrolysis by enzyme for birchwood xylan and oat spelts xylan were 47 and 40%, respectively. The Michaelis constants for birchwood xylan and oat spelts xylan were calculated to be 3.03 mg/ml and 5.0 mg/ml, respectively. The activity of the xylanase was inhibited reversibly by $HgCl_2$, and showed competitive inhibition by N-bromosuccinimide, which probably indicates the involvement of tryptophan residue in the active center of the enzyme. The Xylanase was identified to be xylose-producing endo-type xylanase and did not show the enzymatic activities which cleave the branch point of the xylan structure.

• 한국미생물·생명공학회지
• /
• 제46권1호
• /
• pp.59-67
• /
• 2018

A xylanolytic and cellulolytic anaerobic bacterium strain CtC72 was isolated from cattle rumen liquor. Phylogenetic analysis of 16S rRNA gene sequences revealed that strain CtC72 shared only 97.78% homology with its nearest phylogenetic affiliate Actinomyces ruminicola, showing its novelty. The strain could grow on medium containing xylan, carboxymethyl cellulose and avicel producing $CO_2$, acetate, and ethanol as major fermentation products. The whole genome analysis of the strain CtC72 exhibited a broad range of carbohydrate-active enzymes required for the breakdown and utilization of lignocellulosic biomass. Genes related to the production of ethanol and stress tolerance were also detected. Further there were several unique genes in CtC72 for chitin degradation, pectin utilization, sugar utilization, and stress response in comparison with Actinomyces ruminicola. The results show that the strain CtC72, a putative novel bacterium can be used for lignocellulosic biomass based biotechnological applications.

• KSBB Journal
• /
• 제29권4호
• /
• pp.239-243
• /
• 2014

Recently, there is a growing interest in efficient biomass pretreatment and saccharification processes to produce biofuels and biochemicals from renewable non-food biomass resources. In this study, glucose was produced from cellulose by immobilizing cellulase enzyme on chitosan beads which was reported to have high pH and temperature stability. The immobilized amounts of cellulase on chitosan beads linearly increased with increasing the concentrations of cellulase solution. The glucose production increased to 7.2 g/L from 1% carboxymethyl cellulose (CMC) substrate when immobilized at 20% cellulase solution. The maximum specific activity was 0.37 unit/mg protein when immobilized at 8% cellulase solution. At pH 7 and $37^{\circ}C$, the optimum reaction composition was 0.5 g beads/L from 1% CMC substrate. At this condition, the conversion to glucose completed at ca. 20 min.

• Journal of Pharmaceutical Investigation
• /
• 제27권2호
• /
• pp.133-137
• /
• 1997

Buccal absorption test of omeprazole in human was performed to determine the permeability of the drug molecule through oral mucous membrane. Oral mucosal adhesive tablets of omeprazole were prepared by compressing the omeprazole with a mixture of sodium alginate and hydroxypropylmethyl cellulose (HPMC) as bioadhesive polymers, magnesium oxide (MgO) as a stabilizer and sodium carboxymethyl cellulose (Na CMC) or cros-carmellose sodium (Ac-Di-Sol) as disintegrants. The bioadhesive force, stability in saliva and release characteristics of the tablets were evaluated. Omeprazole was absorbed about 23% in 15 min through human buccal mucous membrane. Furthermore, omeprazole was stable in saliva for more than 8 hrs when MgO was added to the tablet as the amount of 2.5 fold of omeprazole. The release rate of omeprazole was increased with increasing the amount of sodium alginate in the tablet. From these results, it is suggested that tablets composed of [omeprazole/HPMC/sodium alginate/MgO/Ac-Di-Sol and/or Na CMC (20/6/24/50/10) (mg/tablet)] are potential candidate for buccal drug delivery system.

• Geomechanics and Engineering
• /
• 제34권3호
• /
• pp.221-231
• /
• 2023

Biopolymer stabilization is a sustainable alternative to traditional techniques that cause a lesser negative impact on the environment during production and application. The study aims to minimize the biopolymer dosages by sizing the bio-additives to the nanoscale. This study combines the advantages of bio and nanomaterials in geotechnical engineering applications and attempts to investigate the behaviour of a low viscous biopolymer, nano sodium carboxymethyl cellulose (nCMC), to treat organic soil. Soil is treated with 0.25%, 0.50%, 0.75% and 1.00% of nano-bio additive, and its effect on the plastic behaviour, compaction characteristics, strength, hydraulic conductivity (HC) and compressible nature are investigated. The strength increased by 1.68 times after 90 days of curing at a dosage of 0.5% nCMC through the formation of gel threads connecting the soil particles that stiffened the matrix. The viscosity of 1% nCMC increased exponentially, deterring fluid flow through the voids and reduced the HC by 0.85 times after curing for 90 days. Also, beyond the optimum dosage of 0.50%, the nCMC forms a film around the soil particles that inhibits the inter-particle cohesion causing a reduction in strength. Experimental results show that nCMC can effectively substitute conventional additives to stabilize the soil.

• Applied Biological Chemistry
• /
• 제33권3호
• /
• pp.209-215
• /
• 1990

압출면의 영양강화 목적으로 대두분을 소맥분과 섞어 점도 특성을 고찰하고, 압출면을 제조할 후 조리시험, 조리면의 조직감시험 및 관능정사 결과 대주분 첨가비율이 증가함에 따라 복합분의 점도, 조리면의 조직감 및 조리품질은 저하하였다. 대두분 10% 첨가 압출면에 각종 첨가제의 첨가효과를 보면, 첨가제의 첨가량이 증가함에 따라 점도는 증가하였으며, 첨가제 중에서는 xanthangum이 가장 효과적이었다. 조직감에 있어서는 Na-carboxymethyl cellulose 2.0%, guar gum 2.0%, xanthan gum 1.0%에서 밀가루면과 비슷한 값을 나타내었으며, 관능검사도 이와 유사한 결과를 보였다.

• 한국균학회지
• /
• 제25권1호통권80호
• /
• pp.68-76
• /
• 1997

섬유소자원의 이용을 목적으로 담자균류인 T. trogii를 실험 균주로 하여 합성배지에서 cellulase 생성 최적 배양조건을 검토해 본 결과는 다음과 같다. 합성배지에서 T. trogii에 의한 cellulase 생산은 $30{\sim}35^{\circ}C,\;pH\;4.0{\sim}6.0,\;and\;11{\sim}15$일 배양시 가장 높았다. 탄소원은 Avicelase와 ${\beta}-glucosidase$의 경우 CMC를, CMCase는 cellulose를 탄소원으로 했을 때 최고의 생산성을 보였으며, CMC의 최적 농도는 세 효소 모두 3%이었다. 질소원은 ammonium tartrate 첨가시 cellulase 생산이 높았으며, 그 최적 농도로 Avicelase와 ${\beta}-glucosidase$는 0.03N, CMCase는 0.04 N이었다.

• Journal of Microbiology and Biotechnology
• /
• 제17권11호
• /
• pp.1782-1788
• /
• 2007

Cellulosomes in Clostridium cellulovorans are assembled by the interaction between the repeated cohesin domains of a scaffolding protein (CbpA) and the dockerin domain of enzyme components. In this study, we determined the synergistic effects on cellulosic and hemicellulosic substrates by three different recombinant mini-cellulosomes containing either endoglucanase EngB or endoxylanase XynA bound to mini-CbpA with one cohesin domain (mini-CbpAl), two cohesins (mini-CbpA12), or four cohesins (mini-CbpAl234). The assembly of EngB or XynA with mini-CbpA increased the activity against carboxymethyl cellulose, acid-swollen cellulose, Avicel, xylan, and com fiber 1.1-1.8-fold compared with that for the corresponding enzyme alone. A most distinct improvement was shown with com fiber, a natural substrate containing xylan, arabinan, and cellulose. However, there was little difference in activity between the three different mini-cellulosomes when the cellulosomal enzyme concentration was held constant regardless of the copy number of cohesins in the cellulosome. A synergistic effect was observed when the enzyme concentration was increased to be proportional to the number of cohesins in the mini-cellulosome. The highest degree of synergy was observed with mini-CbpAl234 (1.8-fold) and then mini-CbpAl2 (1.3-fold), and the lowest synergy was observed with mini-CbpAl (1.2-fold) when Avicel was used as the substrate. As the copy number of cohesin was increased, there was more synergy. These results indicate that the clustering effect (physical enzyme proximity) of the enzyme within the mini-cellulosome is one of the important factors for efficient degradation of plant cell walls.

• Journal of Microbiology and Biotechnology
• /
• 제22권11호
• /
• pp.1494-1500
• /
• 2012

Fermentation with filamentous fungi in a bioreactor is a complex dynamic process that is affected by flow conditions and the evolution of the rheological properties of the medium. These properties are mainly affected by the biomass concentration and the morphology of the fungus. In this work, the rheological properties of a fermentation with the fungus Beauveria bassiana under different hydrodynamic conditions were studied and the rheological behavior of this broth was simulated through a mixture of carboxymethyl cellulose sodium and cellulose fibers (CMCNa-SF). The bioreactor was a 10 L CSTR tank operated at different stir velocities. Rheological results were similar at 100 and 300 rpm for both systems. However, there was a significant increase in the viscosity accompanied by a change in the consistence index, calculated according to the power law model, for both systems at 800 rpm. The systems exhibited shear-thinning behavior at all stir velocities, which was determined with the power law model. The mixing time was observed to increase as the cellulose content in the system increased and, consequently, the efficiency of mixing diminished. These results are thought to be due to the rheological and morphological similarities of the two fungal systems. These results will help in the optimization of scale-up production of these fungi.

• 펄프종이기술
• /
• 제46권4호
• /
• pp.11-20
• /
• 2014

The objective of this study was to investigate the beating properties of two types of cotton pulps such as "cotton lint mixed pulp" and "cotton linter pulp". In order to improve refining characteristics, the effects of carboxymethyl-cellulose (CMC) pre-treatment, mixing ratio changes of cotton lint mixed pulp and cotton linter pulp, and refining load changes were analyzed. In mill application, it was possible to improve the refining characteristics and maintained the strength properties of the paper by applying increasing ratio of cotton linter pulp mixing and controlling the refining methods.