• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.4
• /
• pp.664-670
• /
• 2012

Experiments were conducted to find out the landscape effects and green manure production at the same time in farmland. Cornflower was grown in different soil texture with sand, sandy loam, loam, clay loam, and was sowing with autumn and spring respectively. The overwintering rate of cornflower was at 58.7% in average, and the treatment at sand soil showed 62.1% that was highest among other soils, which cornflower is possible to winter landscape crop. After flowering of cornflower, the contents of total nitrogen (T-N) and total carbon (T-C) in plant were 15.0 and $409.2g\;kg^{-1}$, respectively, and the carbon-nitrogen ratio (C/N) was 28.6. The yield of cornflower biomass, which will be returned to soil as green manure, recorded $1,210{\sim}3,920kg\;ha^{-1}$ at the spring seeding higher than the autumn seeding as $1,540{\sim}3,170kg\;ha^{-1}$, and the biomass treated by soil texture were showed that the treatments at the clay loam had been the largest yields both spring and autumn seeding among at other treatment of soil. The heights of cornflower regardless of soil treatments were 52.8 to 73.6 cm at the autumn seeding and 35.5 to 79.2 cm at the spring seeding although it was more significant variation at the soil textures than the seeding periods. The flowering periods of cornflower ranged from $17^{th}$ to $20^{th}$ in May at the autumn seeding and from $19^{th}$ to $20^{th}$ in June at the spring seeding, which was faster 30 days approximately at the autumn seeding than the spring seeding. In a view of the cornflower application as green manure after flowering, the autumn seeding, when considered to combine with following crops, was more suitable and various than the spring seeding, even though the yield at spring seeding was higher than one at autumn seeding.

• Korean Journal of Soil Science and Fertilizer
• /
• v.12 no.4
• /
• pp.179-187
• /
• 1980

1) Soils (volcanic ash and muck) were fractionated into particle-size separates (200 - 20, 20 - 2, 2 - 0.5 and finer than $0.5{\mu}$ in diamter), and of which the silt fraction was further fractionated into specific gravity separates (more than 2.0, 2.0 - 1.7, 1.7 - 1.4 and less than 1.4 in $g/cc^3$). And total organic and inorganic phosphorus in the separates were determined. 2) The amounts of total, organic and inorganic phosphorus distributed in the particle-size separates were as follows fine clay > coarse clay > silt > fine sand fraction. The increase rate in the amounts of phosphorus was great in the separates finer than $20{\mu}$, and greatest in the fine clay fraction. 3) The amounts of total, oganic and inorganic phosphorus distributed in the specific gravity separates were as follows: 2.0 - 1.7 > 1.7 - 1.4 > heavier than 2.0 fraction. The increase rate in the amounts of phosphorus was in the following order 2.0 - 1.7 > 1.7 - 1.4 > heavier than 2.0 fraction. 4) Distribution of carbon, amorphous aluminum and free iron oxides in the particle-size separates and the specific gravity separates were examined, and the distribution and the formes of organo-minera1 complexes in the separates were discussed to shed light on the factors affecting the distribution of phosphorous into the separates. And it was estimated that there was close relation among the distribution of organic and inorganic phosphorus, and the distribution and the formes of organo-minera1 complexes.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.6
• /
• pp.478-485
• /
• 2009

This study was conducted to reclassify Yongheung series based on the second edition of Soil Taxonomy and to discuss the formation of Yongheung series in Jeju Island. Morphological properties of typifying pedon of Yongheung series were investigated and physico-chemical properties were analyzed according to Soil Survey Laboratory Methods Manual. The typifying pedon contains 3.2~3.4% oxalate extractable (Al + 1/2 Fe), less than 85% phosphate retention, and higher bulk density than $0.90Mg\;m^{-3}$. That can not be classified as Andisol. But it has an argillic horizon from a depth of 15 to 150 cm and a base saturation (sum of cations) of less than 35% at 125 cm below the upper boundary of the argillic horizon. That can be classified as Ultisol, not as Andisol or Alfisol. The typifying pedon has 0.9 % or more organic carbon in the upper 15 cm of the argillic horizon and accordingly, can be classified as Humult. It has a clay distribution in which the percentage of clay does not decrese from its maximum amount by 20% or more within a depth of 150 cm from the mineral soil surface, and keys out as Palehumult. Also that meets the requirements of Typic Palehumult. That has 35 % or more clay at the particle-size control section and has mesic soil temperature regime. Yongheung series can be classified as fine, mixed, thermic family of Typic Palehumults, not as fine, mixed, thermic family of Typic Hapludalfs. Most soils distributed in the southern coastal areas in Jeju island which have a humid climate are developed as Andisols. But Yongheung series distributed in this areas and derived from mainly trachyte, trachytic andesite, and volcanic ash are developed as Ultisols.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.3
• /
• pp.330-342
• /
• 1998

Benthic environmental parameters were analysed at 40 stations during the period from April 1995 to February 1996. such as water temperature, salinity, and dissolved oxygen (DO)-concentration in the surface and bottom water layers, grain size, chemical oxygen demand (COD), ignition loss, particulate organic carbon (POC) in the sediment of Youngsan River estuary. The water temperature ranged from 4.1 to $29.8^{\circ}C$ in the surface and 4.0 to $20.7^{\circ}C$ in the bottom layers. Salinity ranged from 15.1 to $33.6\%_{\circ}$ in the surface and 31.5 to $33.2\%_{\circ}$ in the bottom layer. The salinity in the outer pan of the study area was higher than that of inner area from autumn to spring, whereas they remained lower in summer. Dissolved oxygen concentration ranged from 5,1 to 11.2 $mg/\ell$ in the surface, and 0.79 to 10,2 $mg/{\ell}$ in the bottom layers. Hypoxic condition ($\le2.0mg/\ell$) was developed in the bottom water layer from Youngsan dike to Mokpo Harhour in summer due to the summer stratification. The surface sediment type was silty clay with a mean grain size of $9.12{\pm}0.45\phi$. The range of COD was from 6.15 to $15.49mgO_2/g$ with a mean of $10.59{\pm}12.64mgO_2/g$. The COD in the inner stations was relatively higher than that of outer stations, and decreased toward the outer part of the study area. Ignition loss (IL) ranged from 3.35 to $15.45\%$ with a mean of $5.96{\pm}1.91\%$. Principal component analysis was carried out from the following five environmental parameters: water temperature, dissolved oxygen in the bottom layer and mean grain size, clay content and COD in the sediment. The forty stations in the study area were classified into three stational groups. Group I was located in the inner part of the estuary characterised by relatively low surface salinity and bottom water temperature, fine sedimemt texture, high organic matter and low dissolved oxygen concentration during the summer. Meanwhile, Group III showing relatively high bottom salinity and water temperature was located in the outer part of the estuary characterising coarse sediment and low organic content in sediment. Group II was between Group I and Group III. The division of the areal groups had high correlations to the DO in the bottom layer and clay content in the sediment.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.2
• /
• pp.161-175
• /
• 2008

The soil developed from volcanic ash in Jeju Island, Korea, were classified as typical Andisols. The soils had acidic pH, high water contents, high organic matters and clay-silty textures. The crystalline minerals of the samples were mainly composed of ferromagnesian minerals such as olivine and pyroxene, and iron oxides such as magnetite and hematite derived from basaltic materials. A large amount of gibbsite was found at the subsurface horizon as a secondary product from the migration of excessive aluminum. In addition, our study has shown that considerable amounts of poorly ordered minerals like allophane and ferrihydrite were present in Jeju soils. The contents of $SiO_2$ were lower than those of other soil orders, but $A1_2O_3$ and $Fe_2O_3$ contents were higher. These results are some of the important chemical properties of Andisols. The contents of heavy metals were in the range of $84{\sim}198$ for Zn, $56{\sim}414$ for Ni, $38{\sim}150$ for Co, $132{\sim}1164\;mg\;kg^{-1}$ for Cr, which are higher than the worldwide values in most of the soils. Some soil samples contained relatively high levels of Cr exceeding 1000 mg/kg. Mean reduction capacity of the Jeju soils was $6.53\;mg\;L^{-1}$ reduced Cr(VI), 5.1 times higher than that of the non-volcanic ash soils from inland of Korea. The soil reduction capacity of the inland soils had a good correlation with total carbon content (R = 0.90). However, in spite of 20 times higher total carbon contents in the Jeju soils, there was a week negative correlation between the reduction capacity and the carbon content (R = -0.469), suggesting that the reduction capacity of Jeju soils is not mainly controlled by the carbon content and affected by other soil properties. Correlations of the reduction capacity with major elements showed that Al and Fe were closely connected with the reduction capacity in Jeju soil (R = 0.793; R = 0.626 respectively). Moreover, the amounts of Ni, Co and Cr had considerable correlations with the reduction capacity (R = 0.538; R = 0.647; R = 0.468 respectively). In particular, in relation to the behavior of redox-sensitive Cr, the oxidation of the trivalent chromium to mobile and toxic hexavalent chromium can be restricted by the high reduction capacity in Jeju soil. The factors controlling the reduction capacity in Jeju soils may have a close relation with the andic soil properties explained by the presence of considerable allophane and ferrihydrite in the soils.

• Korean Journal of Food Science and Technology
• /
• v.30 no.2
• /
• pp.313-318
• /
• 1998

Using direct headspace sampling (DHS) method, volatile terpenoid content was measured according to carrot cultured areas and various portions of carrot. In comparison of volatile terpenoid content in xylem and phloem of carrot, every volatile terpenoid was distributed highly in the xylem rather than the phloem of carrot. The carrot was divided into three different sections; upper (crown), middle (midsection), and lower part (tip), and the volatile terpenoids were measured. The content of ${\alpha}-pinene,\;{\beta}-pinene,\;{\beta}-myrcene,\;and\;{\gamma}-terpinene$ tended to be distributed highly in the upper part rather than the lower part, whereas the content of terpinolene and total terpenoids tended to be high in the lower part. In comparison of volatile terpenoid content according to the carrot cultured areas, volatile terpenoid content of carrot cultured in Cheju island was higher than Yangsan and Haenam areas. In case of total terpenoids, the carrot clutivars cultured in Cheju island contained $1.6{\sim}2.3\;times$ higher than those of Yangsan, and $1.5{\sim}2.4\;times$ higher than Haenam. In order to investigate the above results, we sampled out soils from the carrot fields and measured physical and chemical characteristics of the soils. The pH did not show much difference in the three areas. However the organic carbon, total nitrogen, cation exchange capacity, and total exchangeable cation in soil from Cheju were $2.4{\sim}3.0\;times$ higher than Yangsan and $3.9{\sim}7.1\;times$ higher than Haenam. The physical characteristics of the soils was investigated. The soil from Cheju island was found to be loam; Yangsan, sandy loam, and Haenam, clay loam.

• Journal of the Mineralogical Society of Korea
• /
• v.31 no.2
• /
• pp.113-121
• /
• 2018

Baekasan Acheon cave located in Hwasun-gun, Jeollanam-do is a natural limestone cave only found in this province. In this study, the mineralogical and geochemical characteristics of speleothems collected from Baekasan Acheon cave were identified and the capability of carbonate mineral formation by aerobic microorganisms enriched from the cave and the mineralogical and geochemical characteristics of carbonate minerals formed by the microorganisms were investigated. The samples of sediments (clay) and speleothems (shelfstone and cave coral) were collected at three sites in the cave. The samples of shelfstone and cave coral were identified mainly as carbonate mineral, Mg-rich calcite, and clay minerals were composed of quartz, muscovite, and vermiculite by X-ray diffraction (XRD) analysis. To cultivate the carbonate forming microorganisms, parts of the sediment and speleothems were placed in D-1 medium containing urea, respectively, and the growth of microorganisms was observed under the aerobic condition at room temperature. The capability of carbonate mineralization of the cultured Baekasan Acheon cave microorganisms was examined through adding 1% (v/v) of the cultured microorganisms and calcium sources, Ca-acetate or Ca-lactate, into the D-1 medium. XRD analysis showed that the microorganisms cultured in cave deposits formed calcium carbonate ($CaCO_3$) under all conditions, and these microbial carbonate minerals included calcite and vaterite. The morphological characteristics and chemical composition of biologically formed minerals were observed by SEM-EDS showed various crystal forms such as rhomboid, spherical, perforated surface with Ca, C, and O of major chemical components. The existence of such microorganisms in the cave can contribute the formation of carbonate minerals, and it is likely to affect the geochemical cycles of carbon and calcium in the cave.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.11
• /
• pp.1180-1185
• /
• 2006

Lab-scale batch experiments using several 25-L transparent acrylic reactors were conducted to develop optimum capping materials that can reduce phosphorus released from polluted sediments. The sediment used in the experiment was very fine clay(8.8 $\Phi$ in mean grain size), and organic carbon($C_{org}$) content was as high as 2%. Four kinds of batches with different capping materials Brucite($Mg(OH)_2$), Sea sand($SiO_2$), Granular-gypsum($CaSO_4{\cdot}2H_2O$), Double layer(brucite+sand), and one control batch were operated for 30 days. Phosphorus fluxes released from bottom sediments in the control batch were estimated to be 14.6 $mg{\cdot}m^{-2}{\cdot}d^{-1}$, while 9.5 $mg{\cdot}m^{-2}{\cdot}d^{-1}$, 5.2 $mg{\cdot}m^{-2}{\cdot}d^{-1}$, 4.2 $mg{\cdot}m^{-2}{\cdot}d^{-1}$, and 3.1 $mg{\cdot}m^{-2}{\cdot}d^{-1}$ in the batch capped with Sea sand, Granular-gypsum, Double layer, and Brucite, respectively. The results obtained from lab-scale batch experiments show that there were 70% reduction of phosphorus for some materials such as Brucite, Double layer(brucite+sand), and whereas sea sand only about 35%. The pH range of surface sediment to which Brucite was applied showed about $8.0{\sim}9.5$ in the weak alkaline state. This effect can prevent liberation of $H_2O$. The addition of gypsum into the sediment can reduce the progress of methanogenesis because of fast early diagenesis and sufficient supply of $SO_4^{2-}$ to the sediments, stimulate the SRB highly. Therefore, the application of Brucite and Gypsum can reduce phosphorus release from the sediment as a result of formation of $Mg_5(OH)(PO_4)_3$, pyrite($FeS_x$), and apatite-mineral.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.1
• /
• pp.4-31
• /
• 2018

The Neolithic pottery excavated from the Jungsandong site has been classified into four types of pottery (I: feldspar type, II: mica type, III: talc type and IV: asbestos type) according to their mineral composition. These four types of potteries generally appear to have undergone incomplete firing, while the level of oxidation in the type I pottery objects, which have a relatively higher clay content, was found to be particularly low. The type III objects, which have a high talc content, are judged to have been somewhat slow in removing carbon because they contain saponite belonging to the smectite group. Of the four types of pottery, type IV showed the highest redness and the most uniform characteristics, thus indicating a good level of oxidation. In particular, fixed carbide (C; 33.7 wt.%) with a thickness of about 1mm, and originating from organic substances, was detected inside the walls of the type I pottery, while the deep radial cracks in the outer surfaces of the pottery are thought to have been caused by repeated thermal shocks. Given that all of the pottery except for the type I artifacts are considered to be have been made for storage purposes, those containing talc and tremolite are easy to done liquid storing vessels based on an analysis of their material characteristics. As for the type II relics, which are composed of various minerals and exhibit poor physical properties, they seem to have been used for simple storage purposes. As domestic talc and asbestos mines were concentrated in the areas of Gyeonggi, Gangwon, Chungbuk, and Chungnam, it seems likely that talc and tremolite were produced as contiguous minerals. Considering the distance between the remains in Jungsandong and these mines and their geographical distribution, there is a possibility - albeit somewhat slight - that these mines were developed for the mining of various minerals. Although ultramafic rock masses - such as serpentine capable of generating talc and tremolite - have not been found in the Jungsandong area, limestone and biotite granite containing mica schist have been identified in the northwestern part of Yeongjong Island, indicating that small rock masses might have formed there in the past. Therefore, it is judged necessary to accumulate data on pottery containing talc and tremolite, other than the remains in Jungsandong, and to investigate the rocks and soils in the surrounding area with greater precision. The firing temperatures of the pottery found at the Jungsandong site were interpreted by analyzing the stability ranges of the mineral composition of each type. As a result, they have been estimated to range from 550 to $800^{\circ}C$ for the type I artifacts, and from 550 to $700^{\circ}C$ for the type I, II and IV artifacts. However, these temperatures are not the only factors to have affected their physical properties and firing temperature, and the types, particle sizes, and firing time of the clay should all be taken into consideration.

• Journal of Mushroom
• /
• v.7 no.1
• /
• pp.9-21
• /
• 2009

This study was executed in an attempt to investigate a artificial requisites of fruitbody occurrence. Environmental requirements on habitat for fruitbody occurrence of collected cultures resulted in leading to $13-16^{\circ}C$ and 75% relative humidity, and requiring silt loam of soil texture which had more nutritional substances than a dry field. Optimal temperature was $25^{\circ}C$, medium PDB, and pH 5.0 in cultural conditions. Mannose required of 5% in ASI 59002, 59003, 59004, but 3% in ASI 59001 was selected as optimum carbon source. The substrates stimulating sclerotium formation were cotton waste, or cotton waste + oak sawdust (mixture ratio of 8:2), which had 20% additive of wheat barn respectively. Sclerotium was formed well in the substrate adjusted chemical properties by applying 2% of calcium sulfate. Sclerotium formation was the most effective in the treatment of peat moss + oak sawdust (mixture ratio of 5:5) + 30% of wheat barn.