• Carbon letters
• /
• v.19
• /
• pp.57-65
• /
• 2016

Isroaniso matrix precursor synthesized from commercially available petroleum pitch was stabilized in air. The influence of oxygen mass gain during stabilization on the yield of matrix precursor was studied. Additionally, the influence of pressure on the yield of the stabilized matrix precursor in a real system was studied. The fourier transform infrared spectrometry (FTIR), thermogravimetric analysis (TGA), yield, yield rate, and yield impact were used to check the effect of stabilization and pressure on the yield of the matrix precursor and the end properties of the composite thereafter. The results showed that the yield increased with stabilization duration up to 20 h whereas it decreased for stabilization duration beyond 20 h. Further results showed that the stabilized matrix precursor for a duration of 5 h could withstand almost two-fold greater hot-pressing pressure without resulting in exudation as compared to that of a 1 h stabilized matrix precursor. The enhanced hot-pressing pressure significantly improved the yield of the matrix precursor. As a consequence, the densification and mechanical properties were increased significantly. Further, the matrix precursor stabilized for a duration of 20 h or more failed to provide proper and uniform binding of the reinforcement.

• Carbon letters
• /
• v.1 no.2
• /
• pp.60-63
• /
• 2000

In this work, the carbon fibers-reinforced carbon matrix composites made with different carbon char yields of phenolic resin matrix have been characterized by mechanical flexural tests for acoustic emission properties. The composites had been fabricated in the form of two-dimensional polyacrylonitrile based carbon fibers during the carbonization process. It was found that the composites made with the carbon char yield-rich of resin matrix result in better mechanical interfacial properties, i.e., the interlaminar shear strength (ILSS) of the composites. The data obtained from the acoustic emission monitored appeared to show that the composites made with carbon char yield-rich were also more ductile. From the acoustic emission results, the primary composite failure was largely depended on the debonding at interfaces between fibers and matrix. The interlaminar shear strengths of the composites were correlated with the acoustic emission results.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.8
• /
• pp.682-685
• /
• 2011

An engine oil sensor based on multiwall carbon nanotubes was fabricated with screen printing method. Since carbon nanotubes are generally intertwined, dispersion of the carbon nanotubes in the binding agent (ethyl cellulose, a-terpineol, frit) is a key factor for large yield of engine oil sensor. By conventional dispersion method, a hand-mill method, the maximum yield was 80% at most. However, we used the hand ultrasonic, in order to increase the yield of the sensors. As a results, our engine oil sensor fabricated by the screen printing method shows excellent yield rate of 97%, when we dispersed a paste by the hand ultrasonic method.

• Resources Recycling
• /
• v.8 no.3
• /
• pp.43-48
• /
• 1999

The pupose of h s study was to develop a process for removal of unburnzd carbon li-om fly ash by froth flotation. "Carbon zero (C.Z)" develqcd by KIGAM, gave the best results, praduci112 cleaned fly ash containing abom 0.1% FC with 72% yieldBased on the results of batch flotation tests, the pilot-scale tests wcre conducted. The result showed that cleaned fly ash with 0.1% FC could be recovered by about 73% yield.t 73% yield.

• Carbon letters
• /
• v.19
• /
• pp.104-106
• /
• 2016

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.2
• /
• pp.21-26
• /
• 1997

Lignin viscous material was prepared from acetosolve lignin by phenolation and heat treatment. The yield of phenolation was about 160% with p-toluene sulfonic acid(2% of acetosolve lignin) as catalyzer. Phenolated lignin has a good spinnability and thermosetting property by $300^{\circ}C$ treatment with vaccum. Acetosolve lignin carbon fiber has $20{\pm}5$ m diameter and $68.2{\pm}10\;kg/mm^2$ tensile strength. The yield of carbon fiber based on acetosolve lignin was 31%.

• Carbon letters
• /
• v.6 no.3
• /
• pp.173-180
• /
• 2005

In this study, AR (aromatic resin) pitch was employed as the matrix-precursor for carbon/carbon composite because it exhibits much higher coke yield than coal tar pitch. As a result, a fabrication process of carbon/carbon composites can be shortened. It has been known that the pitches may cause swolling problem during the carbonization process. In order to restrain the swelling occurrence, a small quantity of carbon black was added to the AR pitch. Due to addition of carbon black the swelling was decreased largely and the perform can be infiltrated with the AR pitch. The densification efficiency of the performs was compared with various matrix-precursors. The coke yield of matrixprecursors, the morphology and the degree of graphitization of carbon matrix were analyzed.

• Carbon letters
• /
• v.16 no.1
• /
• pp.62-66
• /
• 2015

In this study, carbonized fibers were prepared by using acidically cross-linked LDPE fibers. The surface morphologies of the carbonized fibers were observed by SEM. The effects of cross-linking process temperatures were studied using thermal analyses such as DSC and TGA. The melting and heating enthalpy of the fibers decreased as the cross-linking temperature increased. The cross-linked fibers had a carbonization yield of over 50%. From SEM results the highest yield of carbonized LDPE-based fibers was obtained by cross-linking at a sulfate temperature ($170^{\circ}C$). As a result, carbonation yield of the carbonized fibers was found to depend on the functions of the cross-linking ratio of the LDPE precursors.

• Journal of Environmental Science International
• /
• v.10 no.5
• /
• pp.373-380
• /
• 2001

In recent years, the demand of activated carbon has been increasing steadily because of the environmental problems. Among them waste and water treatment and removal of poisonous gas were invorved. Therefore, in this study, activated carbon was made from the waste chinese cabbage and measured the iodine adsorption ability, carbonization yield, and activation yield of the produced activated carbon. The result showed that the carbonization yield was decreased when carbonization temperature was increaed and that the optimal carbonization temperature was $600{\circ}C$. The optimal concentration of NaOH for removing ash in the raw sample was 1~2N. The range of iodine adsorption number of activated carbon using chinese cabbage at $600{\circ}C$. carbonization was 610.82mg/g to 1019.58mg/g. The activation result of carbonization sample showed that the optimal activation condition was the carbonization at $400\circ}C$ and the activation at$700{\circ}C$. So the production of activated carbon using chinese cabbage was possible in the aspect of reuse of resource and decrease of environmental pollution compared to the commercial activated carbon.

• Carbon letters
• /
• v.5 no.3
• /
• pp.133-141
• /
• 2004

The synthetic behaviors of carbon nanotubes (CNTs) by Fe/MgO catalysts were investigated in 0~90 wt.% range of MgO mixture ratios by catalytic chemical vapor deposition (CCVD) process. The CNTs were synthesized with 40 minutes of synthetic time, and 923 K of synthetic temperature using 0.1 L/min of ethylene gas and 1.0 L/min of hydrogen gas as synthetic and carrier gas, respectively. As the increase of synthetic temperatures and times, the diameters of CNTs become thicker. The carbon yield showed in a parabolic curve as MgO content increased and the maximum carbon yield was obtained at 30 wt.% of MgO. There were no obvious changes in the diameters of CNTs respect to the change of MgO content. Fe/MgO CNTs showed good crystalinity by High Resolution Transmission Electron microscope (HR-TEM) analysis. The behaviors of Fe/MgO CNTs have a tendency of depending on synthetic time and temperature rather than MgO content.