• Journal of the Korean Geotechnical Society
• /
• v.17 no.6
• /
• pp.181-191
• /
• 2001

Granular compaction piles increase the load bearing capacity of the soft ground and reduce the settlement of fecundation built on the reinforced soil. Also the granular compaction piles accelerate the consolidation of soft ground using the granular materials such as sand, gravel, stone etc. However, this method is one of unuseful methods in Korea. In the present study, the estimation procedure for the ultimate bearing capacity of randomly installed granular compaction pile group is proposed. Also, carbon rod tests have been peformed for verifying the group effect of granular compaction piles and the behavior characteristics such as bulging failure zone on granular compaction piles. From the test results, it is found that bulging failure shape of granular compaction piles was conical shape and the ultimate bearing capacity increased as the spacing of piles became gradually narrow. Also, from the proposed method in this study, the optimal locations of granular compaction piles with various installed cases are analyzed. The results were shown that the bearing capacity was increased in the case concentrated on the central part of pile group.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.10
• /
• pp.1235-1239
• /
• 2012

Primary water stress corrosion cracking (PWSCC) has been observed around the weld region of control rod drive mechanism (CRDM) nozzles in nuclear power plants overseas. The weld has a J-shaped groove and it connects the CRDM nozzle with the reactor vessel upper head (RVUH). It is a dissimilar metal weld (DMW), because the CRDM is made of alloy 600 and the RVUH is made of carbon steel. In this study, finite element analysis (FEA) was performed to estimate the stress condition around the weld region. Generally, it is known that a high tensile region is more susceptible to PWSCC. FEA was performed as for the condition of welding, hydrostatic test and normal operation successively to observe how the residual stress changes due to plant condition. The FEA results show that a high tensile stress region is formed around the weld starting point on the inner surface and around the weld stop point on the outer surface.

• Corrosion Science and Technology
• /
• v.16 no.5
• /
• pp.235-240
• /
• 2017

Regional cathodic protection has significant impact on pipeline integrity management. After risk analyses of a newly built gas distribution station constructed in an area with large dwelling density, risk score was high because of potential threat caused by galvanic corrosion. Except reinforced steel in concrete, there are four kinds of metal buried under earth: carbon steel, galvanized flat steel, zinc rod and graphite module. To protect buried pipeline from external corrosion, design and construction of regional cathodic protection was proposed. Current density was measured with potential using potential dynamic test and boundary element method (BEM) was used to calculate current requirement and optimize best anode placement during design. From our calculation on the potential, optimized conditions for this area were that an applied current was 3A and anode was placed at 40 meters deep from the soil surface. It results in potential range between $-1.128V_{CSE}$ and $-0.863V_{CSE}$, meeting the $-0.85V_{CSE}$ criterion and the $-1.2V_{CSE}$ criterion that no potential was more negative than $-1.2V_{CSE}$ to cause hydrogen evolution at defects in coating of the pipeline.

• Advanced Composite Materials
• /
• v.17 no.4
• /
• pp.359-372
• /
• 2008

The moisture absorption behavior of carbon fiber-reinforced plastic (CFRP) and its effect on dimensional stability were examined. Moisture diffusivity in CFRP was determined by measuring a specimen's weight during the moisture absorption test. Three types of CFRP specimens were prepared: a unidirectionally reinforced laminate, a quasi-isotropic laminate and woven fabric. Each CFRP was processed into two geometries - a thin plate for determination of diffusivity and a rod with a square cross-section for the discussion of two-dimensional diffusion behavior. By solving Fick's law expanded to 3 dimensions, the diffusivities in the three orthogonal directions were obtained and analyzed in terms of the anisotropy of CFRP moisture diffusion. Coefficients of moisture expansion (CMEs) were also obtained from specimen deformation caused by moisture absorption. During moisture absorption, the specimen surfaces showed larger deformation near the edges due to the distribution of moisture contents. This deformation was reasonably predicted by the finite element analysis using experimentally determined diffusivities and CMEs. For unidirectional CFRP, the effect of the fiber alignment on CME was analyzed by micromechanical finite element analysis (FEA) and discussed.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.4
• /
• pp.95-104
• /
• 2006

For the interests in the economical and safe design of foundation system, the concern on the piled raft or disconnected piled raft foundation system is increasing now. In this study, the behavior and the effects of the disconnected piled raft foundation not studied actively in this country were examined using the triaxial compression tests in place of laboratory model tests. The triaxial test samples were prepared with Jumunjin standard sand and the carbon rods, which simulate the ground soil and piles respectively. After the sample in which carbon rods were arranged was laid inside the triaxial chamber, the confining pressure was applied and then loading test was conducted. To analyze the reinforcing effects of the disconnected piled raft foundation, a few number of tests were carried out by changing the number, the diameter and the length of the model piles. As a result of this study, in the disconnected piled raft foundation system, even though the number of pile is few and the diameter of pile is small, the settlement of the foundation system decreased greatly.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.12 no.1
• /
• pp.67-74
• /
• 2004

A bacterium which grow on phenol as an only carbon and energy source was isolated from the sewage sludge at Nangi municipal wastewater treatment plant in Seoul. This bacterium was found to be a Gram negative rod with high motility, and well grew on 0.05%, 0.1%, and 0.15% of phenol. No matching strain was found from the result of the BBL test. Phylogenetic analysis of the strain by comparison of the 16s-rDNA has revealed that this bacterium has 99% of similarity with Stenotrophomonas maltophilia strain of Xanthomonas group, which belongs t the Gamma (${\gamma}$) subdivision of Proteobacteria. This strain has also shown 98% of similarity with nitrogen fixing bacterium MAGDE3 and Pseudomonas cissicola strain, and 97% of similarity with Stenotrophomonas sp. LMG198 and Xanthomonas cucurbitae.

• The Korean Journal of Mycology
• /
• v.27 no.1 s.88
• /
• pp.1-9
• /
• 1999

For the practical using of liquid spawn we carried out selection test of nutrient sources, cultural methods and cultural apparatus for liquid spawn production of oyster mushroom(ASTI 2001, ASTI 2018, ASTI 2072, ASTI 2016, ASTI 2070, ASTI 2180, ASTI 2183, ASTI 2042). The optimal temperature and pH range for mycelial growth of Pleurotus species were $25^{\circ}C\;to\;30^{\circ}C$ and 5.5 to 6.5, respectively. The effect of carbon sources, nitrogen sources and mineral salts on the mycelial growth was studied using petridish culture. Generally, the disaccharides and polysaccharides showed good effect for mycelial growth of Pleurotus species, and the polysaccharides were superior to the other classes of carbon sources for mycelial growth. For the mycelial growth of the 8 oyster mushroom stains, soybean flour was superior to the other kinds of nitrogen sources. On the other hand, addition of mineral salts did not affect, and even poor under certain mineral salts, the mycelial growth of the 8 oyster mushroom stains. The brown sugar selected out the carbon source of the agricultural medium. Also the soybean flour selected out the nitrogen source of agricultural medium. In the medium selection, we selected out agricultural optimum medium composed of brown sugar 3%, soybean flour 0.3%, potassium phosphate 0.05%, magnesium sulfate 0.05%. Under the 250 ml erlenmeyer culture, the effects of such factors as the inoculum rate, the working volume, cultural method and flask shapes on the mycelial growth were examined. The optimal inoculum rate and working volume on the mycelial growth of oyster mushroom was 2 mycelial disk (diameter 6 mm) and 100 ml, respectively. The shake flask culture was enhanced the mycelial growth than at the erlenmeyer flask. Pulp form growth of mycelium in the erlenmeyer flask culture was obtained in the culture with glass rod of length 50 mm, diameter 10 mm.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.5
• /
• pp.363-372
• /
• 2020

Dynamic compressive material properties at high strain rates is essential for improving the reliability of finite element analysis in dynamic environments, such as high-speed collisions and high-speed forming. In general, the dynamic compressive material properties for high strain rates can be obtained through SHPB equipment. In this study, SHPB equipment was used to acquire the dynamic compressive material properties to cope with the collision analysis of Woven tpye CFRP material, which is being recently applied to unmanned aerial vehicles. It is also used as a pulse shaper to secure a constant strain rate for materials with elastic-brittle properties and to improve the reliability of experimental data. In the case of CFRP material, since the anisotropic material has different mechanical properties for each direction, experiments were carried out by fabricating thickness and in-plane specimens. As a result of the SHPB test, in-plane specimens had difficulty in securing data reproducibility and reliability due to fracture of the specimens before reaching a constant strain rate region, whereas in the thickness specimens, the stress consistency of the specimens was excellent. The data reliability is high and a constant strain rate range can be obtained. Through finite element analysis using LS-dyna, it was confirmed that the data measured from the pressure rod were excessively predicted by the deformation of the specimen and the pressure rod.

• Korean Journal of Microbiology
• /
• v.50 no.1
• /
• pp.67-72
• /
• 2014

Minimal broth containing nicotine as a sole carbon source (MB/N) was used to isolate novel nicotine-degrading bacterial strains from tobacco plants and field soils. Comparative analysis of 16S rRNA gene sequence, phenotypic test and morphological tests showed that the position of these isolates were in the genus Arthrobacter of the family Micrococcaceae. The highest 16S rRNA gene sequence similarity of the isolate NU11 and NU15 to type strains in the genus Arthrobacter were Arthrobacter equi (98.2%) which was presumably a novel strain and Arthrobacter nicotinovorans (99.8%), respectively. Both strain NU11 and NU15 showed rod shaped, Gram-positive characteristics and catalase activity, but did not show oxidase activity. The novel strain NU11 was found to degrade efficiently nicotine in MB/N medium by the analysis of UV absorption spectra and could be used as an organism in bioremediation technique.

• Microbiology and Biotechnology Letters
• /
• v.44 no.2
• /
• pp.185-193
• /
• 2016

A novel proteolytic bacterium was isolated from soil at Yeungnam University, South Korea. The strain, named FBL-1, was rod-shaped with a smooth surface. Biolog and API 50CHB test results revealed that strain FBL-1 was a Bacillus species. Based on 16S rDNA sequencing and chemotaxonomic characterization, the strain was identified as Bacillus subtilis because it had the highest homology with Bacillus subtilis subsp. subtilis NCIB 3610 (99.5%). In liquid culture at 37℃ with shaking at 200 rpm, fructose and yeast extract were found to be the best carbon and nitrogen sources, respectively, for cell growth and protease production. The highest protease activity (451.640 U/ml) was obtained when the strain was cultured in medium containing 20 g/l of fructose and 5 g/l of yeast extract. Although further studies are needed to characterize the protease and enhance its activity, the newly isolated protein-degrading B. subtilis FBL-1 can be applicable for the production of peptides and for the degradation of proteins in various industries.