• 구강회복응용과학지
• /
• 제23권1호
• /
• pp.43-53
• /
• 2007

The purpose of this experimental study was to examine the effect of the decontamination of carbon dioxide ($CO_2$) laser in treatment of ligature-induced peri-implantitis in dogs. A total 24 implants with a sandblasted with large-grit and acid-etched (SLA) surface were inserted in six mongrel dogs. After a 3-month healing period, experimental peri-implantitis characterized by a bone loss of about 3mm was established by inducing with wires. And then wires were removed and plaque control was implemented. Surgical treatment involving flap procedure + debridement of implants surface with chlorhexidine and saline (group 1), flap procedure + GBR with absorbable collagen membrane (Bio-Gide) and mineralized bone graft (Bio-Oss) (group 2), and flap procedure + $CO_2$ laser application + GBR (group 3) was performed. The animals were killed 8 weeks and 16 weeks after treatment, respectively. A histomorphometric analysis confirmed statistically considerable new bone formation within the limit of the 5 most coronal threads in group 3 compared with group 1 at 16 weeks (P<0.05). And intragroup analysis showed considerable increase of new bone formation in group 3 at 16 weeks compared with 8 weeks (P<0.05). The present study demonstrates considerable new bone formation after treatment of experimental peri-implantitis with flap procedure, $CO_2$ laser application and GBR.

• Journal of Plant Biotechnology
• /
• 제45권2호
• /
• pp.125-130
• /
• 2018

이 실험에서 우리는 얌의 기내 비대근 유도와 순화에 영향을 미치는 탄소급원의 효과를 연구하였다. 첫 번째로 기내 비대근 유도를 위한 탄소원의 종류와 농도의 효과를 실험하였다. 7% sucrose처리에서 기내 비대근 유도 효율이 가장 높았으며, glucose처리에서는 기내비대근이 형성되지 않았다. 두 번째로 기내식물체의 순화 후 생존율과 비대근 형성율을 실험하였다. 순화 후 형성된 비대근의 직경(6.1 mm)과 생중량(0.5 g)은 7% sucrose에서 생육한 기내식물체에서 가장 높았다. 저농도(3%)의 sucrose처리에서 생육한 기내식물체의 순화 후 생존율은 100%였으나 식물체의 생육과 발달이 억제되었다. 이러한 결과는 얌의 기내 비대근 형성과 순화를 위해 7% sucrose처리가 적정하며 이러한 기술은 얌의 바이러스 및 병 저항성 클론과 우수 개체의 번식을 위해 적용이 가능하다.

• Applied Biological Chemistry
• /
• 제37권6호
• /
• pp.472-479
• /
• 1994

상수처리시 토양현탁액과 같은 유기물이 있을 때 산화제, 응집제 및 흡착제의 종류를 달리하고 처리방법을 변경시켰을 때 THMs 및 유기물의 제거정도를 조사하였다. 산화제로 처리된 $ClO_2$가 다른 산화제인 $Cl_2,\;NH_2Cl,\;KMnO_2$ 및 $O_3$ 보다 THMs 생성억제와 THMs의 전구물질인 유기물을 제거시키는데 가장 효율적이었다. 산화제$(Cl_2,\;NH_2Cl,\;KMnO_4,\;ClO_2,\;O_3)$를 응집 이후에 처리하였을 때 유기물의 양은 거의 변화가 없었으나 THMs의 생성량은 응집 이전 처리보다 약 $36.7{\sim}8.2%$ 정도 감소하였다. 수중 유기물을 응집 제거시키기 위하여 응집제로 alum과 ferric sulfate를 처리하였을 때 응집 효율은 유기물의 분자량 분포에 따라 상이하게 나타났다. THMs 제거 및 생성 억제를 위한 활성탄의 처리는 여과 이후의 처리가 산화제 처리 이전의 활성탄 처리보다 효과적이었다.

• 분석과학
• /
• 제5권1호
• /
• pp.103-110
• /
• 1992

본 연구에서는 고온용 Al-Ti 합금을 제조하기 위하여 복합금속분말의 화학적 균질성과 합금내에 형성되는 미세한 분산상에 대하여 조사하였다. Al-Ti 복합금속분말의 화학적 균질성은 400rpm의 회전속도로 10시간 이상 기계적 합금화하였을 때 나타났으며 MA Al-Ti 합금의 화학분석결과, Ti 함량은 8.2wt.%, 탄소 함량은 1.135wt.%, 그리고 산소 함량은 0.233wt.%였으며, 특히 탄소 함량은 스테아린산의 공정 제어제 중에 있는 약 90% 정도의 탄소가 최종적으로 합금 시편에 혼입되었음을 알 수 있었다. TEM 분석을 통하여 MA Al-Ti 합금의 기지조직내에 구형의 250nm 크기인 $Al_3Ti$ 금속간 화합물상과 침상형태의 폭 50nm, 길이 150nm 크기인 $Al_4C_3$ 탄화물상의 형성을 관찰하였으며 구형 모양을 갖는 약 20nm 크기의 $Al_2O_3$ 탄화물상들이 이 합금의 입내 및 입계에 균일하게 분포되었음을 알 수 있었다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.188-191
• /
• 2002

3-D orthogonal woven carbon/Al composites were fabricated using a pressure infiltration casting method. Especially, to minimize geometrical deformation of fiber pattern and $Al_4C_3$ formation, the process parameters of the minimum pressurizing force, melting temperature, delay and holding time of molten aluminum pressurizing was optimized through the PC-controlled monitoring system. Resonant ultrasound spectroscopy (RUS) was utilized to measure the effective elastic constants of 3-D orthogonal woven carbon/Al composites. The CTE measurement was conducted using strain gages in a heating oven.

• Carbon letters
• /
• 제14권2호
• /
• pp.105-109
• /
• 2013

Effects of the amount of nickel powder (Ni) in Ni-carbon fiber (CF) hybrid filler systems on the conductivity(or resistivity) and thermal coefficient of resistance (TCR) of filled high density polyethylene were studied. Increases of the resistivity and TCR with increasing Ni concentration at a given hybrid filler content were observed. Using the fiber contact model, we showed that the main role of Ni in the hybrid filler system is to decrease the interfiber contact resistance when Ni concentration is less than the threshold point. The formation of structural defects leading to reduced reinforcing effect resulted in both a reduction of strength and an increase of the coefficient of thermal expansion in the composite film; these changes are responsible for the increases of both resistivity and TCR with increasing Ni concentration in the hybrid filler system.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.9-12
• /
• 2008

The internal reforming of n-Butane on Ni-YSZ and Cu-Ceria-YSZ was investigated with anode granule at steam to carbon ratio from 0 to 3 and at temperature of $750^{\circ}C$. Although hydrogen production was lager at Ni-YSZ, resistivity for carbon deposition was better at Cu-Ceria-YSZ. These phenomena occur because unwanted side reaction go on with reforming reaction for hydrogen production at Ni-YSZ.

• 에너지공학
• /
• 제21권4호
• /
• pp.378-384
• /
• 2012

Higher compression ratio is required in diesel engine to ignite the fuel that leads to better efficiency. For complete combustion inside the cylinder it is important to ensure the clean air flow with free of debris and as cool as possible. In this manner, modification of intake valve arrangements is taken in to consideration importantly. In this paper, the intake valve arrangements are modified with newly designed valve mixer. It causes swirl flow of air through the intake port that mixing with the fuel followed by complete combustion. The use of valve mixer reduces the carbon sediment formation on valve fillet and its face area as the carbon particles gradually take place on it after certain running period. It therefore, helps to increase the valve lifetime. And at the same time it reduces the exhaust elements i.e. soot from the automobiles to a significant level.

• 한국주조공학회지
• /
• 제29권2호
• /
• pp.59-63
• /
• 2009

Effects of Ti on damping capacity and mechanical properties are investigated in hot rolled Fe-17%Mn alloy. The existing damping alloy with Fe-Mn binary system was limited the use by high production cost, however in case of using scrap iron instead of pure iron although the content of carbon is higher it is possible to be applied wider field especially construction items because the production cost is lower. However, the excellent specific damping capacity is dropped due to the high content of carbon, we developed advanced type of damping alloy included Ti. TiC is formed with added Ti and it holds the specific damping capacity similar to existing damping alloy. The effect of Ti on damping capacity is found to be beneficial in carbon-containing alloy, which is attributed to the depletion of carbon solute due to the formation of TiC.

• 한국세라믹학회지
• /
• 제32권10호
• /
• pp.1139-1146
• /
• 1995

$\beta$-SiC whiskers could be formed from a system of mullite-carbon-hydrogen by VLS mechanism at elevated temperatures. It was considered that methane gases were generated from the reaction of hydrogen gases with carbon black, and were reacted with mullite to produce two kinds of gases; silicon suboxide (SiO) and carbon monoxide (CO) of precursors of SiC. With increasing the synthesizing temperature up to 146$0^{\circ}C$, the formation of $\beta$-SiC whisker increased from 0.58 mg/$\textrm{cm}^2$ to 3.98 mg/$\textrm{cm}^2$ on the basis of unit area of carbon block, and the diameters of whiskers had their uniformity due to the reduction in stacking faults.