• 폴리머
• /
• 제38권5호
• /
• pp.573-579
• /
• 2014

탄소나노튜브(CNT), 불소계 아크릴레이트 2,2,2-trifluoroethylmethacrylate(3FMA) 및 유-무기 조성비와 같은 합성조건을 달리하여 제조된 자외선 경화형 유-무기 하이브리드 코팅 막의 표면특성 및 내오존성에 대해 연구하였다. 코팅 막은 금속 알콕사이드 전구체인 tetraethoxysilane(TEOS)와 실란 커플링제인 methacryloyloxypropyltrimethoxysilane (MPTMS)로 구성된 유-무기 혼성 용액에 탄소나노튜브 및 3FMA와 자외선 경화를 위한 유기물을 첨가하여 제조된 코팅제를 자외선 경화시켜 제조하였다. 제조된 코팅 막의 내오존성 및 기재와의 접착력은 TEOS, 3FMA 및 CNT의 함량에 크게 영향을 받는다는 것을 확인하였다. 특히, 탄소나노튜브가 첨가된 코팅 막은 우수한 내오존성 및 접착력 뿐만 아니라 높은 표면경도를 나타내었다. TEOS의 경우, 함량이 증가할수록 표면경도 및 내오존성은 향상되었지만, 기재와의 접착력은 감소되었다. 불소아크릴레이트 3FMA의 경우, 함량이 증가할수록 내오존성은 향상되었지만 표면경도는 감소하였다.

• 센서학회지
• /
• 제31권3호
• /
• pp.163-167
• /
• 2022

In this study, we investigated a carbon nanotube (CNT) film sensor to detect hazardous and noxious substances distributed in seawater. The response change of the sensor was studied according to environmental temperature, and its temperature coefficient of resistance (TCR, α) was measured. The temperature of the CNT film (~50 ㎛) was in the range of 20-50 ℃, and αCNT was calculated to be -0.0011 %/ ℃. We experimentally confirmed that the CNT film had a smaller TCR value than that of the conventional sensor. Therefore, we investigated the response change of the CNT sensor according to temperature. The CNT sensor showed a relatively small error of approximately 2.3 % up to 30 ℃, which is within the temperature range of the seawater of the Korean Peninsula. However, when the temperature exceeded 40 ℃, the error in the CNT sensor increased by more than 5.2 %. We fabricated a metal oxide (ITO, indium-tin-oxide) film and compared its performance with that of the CNT sensor. The ITO sensor showed an error of >12.5 % at 30 ℃, indicating that in terms of the stability of the sensor to temperature, the CNT film sensor has superior performance.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.388-389
• /
• 2006

Electro-deposition of carbon film on silicon substrate in methanol solution was carried out with various current density, solution temperature and electrode spacing between anode and cathode. The carbon films with smooth surface morphology and high electrical resistance were formed when the distance between electrode was relatively wider. The electrical resistance of the carbon films were independent of both current density and solution temperature.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.201-202
• /
• 2003

We developed a novel growth method of aligned carbon nanotubes. Aligned carbon nanotubes are grown on a metal catalyst on a glass substrate using biased Helicon plasma chemical vapor deposition (HPECVD) of $CH_4/H_2$ gases from 400 C to 500 C. The Helicon plasma source is one of the high-density plasma sources and is promising for low temperature carbon deposition. A Ni film was used as a catalyst to reduce the activation energy of the nanotubes' growth. The carbon nanotubes were deposited on the nickel catalysis layer selectively.

• 공업화학
• /
• 제24권4호
• /
• pp.438-442
• /
• 2013

본 연구에서는 무전해 도금법으로 니켈과 인을 탄소섬유 표면에 코팅한 후, 열처리시키는 과정에서 일어나는 변화를 다양한 분석방법을 이용하여 연구하였다. 전자현미경(Scanning Electron Microscopy, SEM)을 이용한 연구에서는, 코팅 후 추가적인 열처리를 하지 않은 경우 평평한 표면구조를 관찰하였으나, 열처리 온도가 $350^{\circ}C$에 이르면서 다공성구조가 생성됨을 알았다. 열처리 온도를 $50^{\circ}C$ 간격으로 증가시키면서 연구한 결과 $650^{\circ}C$까지는 열처리 온도가 증가할수록 기공의 크기는 증가하고, 개수는 감소하는 경향성이 관찰되었다. X-선 회절법(x-ray diffraction, XRD) 측정 결과, 코팅 후 추가 열처리가 없는 경우 금속성 Ni, Ni-P 화합물이 관찰되었으며, 열처리 온도가 증가함에 따라 NiO 봉우리는 세기가 증가하며, 금속성 Ni 봉우리의 세기는 감소하였다. X-선 광전자 분광법(X-ray Photoelectron Spectroscopy, XPS) 측정에서는 $650^{\circ}C$, $700^{\circ}C$의 열처리 후 인 산화물이 표면에서 검출됨을 확인하였는데, 이는 코팅된 니켈 필름의 내부에 존재하던 인 화합물이 열처리 온도가 증가함에 따라서 표면 밖으로 빠져 나오는 현상이 일어나는 결과로 해석할 수 있다. 이상의 분석 데이터를 토대로, 무전해 도금으로 코팅된 Ni-P 화합물($Ni_xP_y$)이 열처리 과정에서 산화되면서, 이때 생성된 인 화합물 기체가 승화하면서 필름에 기공을 생성시키는 것으로 제안할 수 있다. 다공성 물질은 넓은 비표면적 등의 우수한 물성때문에 불균일 촉매 등 다양한 분야에 적용될 수 있으며, 본 연구에서 소개하는 다공성 니켈 필름의 제작법은 대량 생산에 적용이 쉬워 환경 필터 분야 등의 다양한 곳에 응용될 수 있을 것으로 생각된다.

• Tribology and Lubricants
• /
• 제38권3호
• /
• pp.101-108
• /
• 2022

The structure and properties of tetrahedral amorphous carbon (ta-C) coatings depend on the main process parameters and bending angles of the magnetic field filter used in the filtered cathodic vacuum arc (FCVA). During the process, it is possible to effectively control the plasma flux of carbon ions incident on the substrate by controlling the arc discharge current, thereby influencing the mechanical properties of the coating film. Furthermore, we can control the size and amount of large particles mixed during carbon film formation while conforming with the bending angle of the mechanical filter mounted on the FCVA; therefore, it also influences the mechanical properties. In this study, we consider tribological characteristics for filtered bending angles of 45° and 90° as a function of arc discharge currents of 60 and 100 A, respectively. Experiment results indicate that the frictional behavior of the ta-C coating film is independent of the bending angle of the filter. However, its sliding wear behavior significantly changes according to the bending angle of the FCVA filter, unlike the effect of the discharge current. Further, upon changing the bending angle from 45° to 90°, abrasive wear gets accelerated, thereby changing the size and mixing amount of macro particles inside the coating film.

• Carbon letters
• /
• 제7권4호
• /
• pp.241-244
• /
• 2006

Carbon/Carbon composite was been manufactured by the technology of warmer-molding process of clutter chopped carbon fiber, using phenolic resin as an adhesive. The degree of graphitization, the microstructure and the friction properties were studied. The results show that the clutter chopped carbon fiber fully scatter in the Carbon/Carbon composite and the degree of graphitization of phenolic resin can reach up to 86.2%, this matrix carbon can form the continuous and stable graphitic thin film on the friction surface during braking process so that the composite has fine friction properties and low wear rate.

• Environmental Engineering Research
• /
• 제14권4호
• /
• pp.238-242
• /
• 2009

This study investigated the effects of organic loading rates on simultaneous carbon and nitrogen removal in an innovative fixed-film aerobic bioreactor. The fixed-film bioreactor (FFB) was composed of a two-compartment aeration tank, in which a synthetic filamentous carrier was submerged as biofilm support media, and a settling tank which polyvinylidene media (Saran) was used as settling aid for suspended solids. Three different organic loading rates, ranging from 0.92-2.02 kg chemical oxygen demand/$m^3$/day were applied by varying hydraulic retention time (HRT). The total soluble organic carbon removal efficiencies were in the range of 90-97%. The removal efficiency of ammonia was found to be in the range of 70-84%. Total nitrogen removal efficiency was found to be in the range of 40-45%, which indicates that denitrification reactions occurred simultaneously in the attached biofilm on the fibrous media in the aeration tank. The settling performance of suspended solids was significantly improved due to the presence of Saran media in the settling compartment, even for a short HRT. The fixed-film aerobic bioreactor used in this study demonstrated efficient treatment efficiency even at higher organic loading rates and at short HRTs.

• Korean Chemical Engineering Research
• /
• 제48권3호
• /
• pp.405-408
• /
• 2010

박막의 흡착특성인 흡착표면적과 세공크기를 수정진동자를 이용하여 측정하는 새로운 방법을 제안하였으며 그 성능을 조사하였다. 수정진동자의 표면에 박막을 직접 제조하여 흡착능을 측정함으로써 박막상태에서 흡착능을 측정하였으며, 이산화탄소를 피흡착 기체로 사용하여 측정이 용이하도록 하였다. 흡착측정 결과로부터 흡착면적은 양호하게 측정이 가능함을 알 수 있었으나, 세공크기의 측정에는 다소 오차가 발생하였다. 간단히 구할 수 있는 이산화탄소를 이용하여 상온에서 박막상태 흡착제의 흡착능 측정이 가능함을 제시하였다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.549-552
• /
• 2012

Recently the world is trying to reduce carbon emissions for global warming. Reducing use of fossil fuels can decrease carbon emission. In this reason the construction field has tried to reduce the use of fossil fuels relating to heating and cooling of buildings. An energy loss through the window system is about 10 to 30 percent of energy consumption of the whole building. The use of window film insulation is increasing to control the heat loss at the windows. The window film insulation absorbs solar radiation and makes the surface temperature of windows high. In this study, window surface temperature is measured, and an impact on indoor air is identified after attaching window film insulation. Finally, we found that cooling load decreases through simulation.