• 한국대기환경학회지
• /
• 제34권3호
• /
• pp.486-492
• /
• 2018

Black carbon concentrations were measured along the altitude at various locations using a drone coupled with a small black carbon detector. The measurement locations are Eunseok Mountain, downtown, four places in KOREATECH campus, Byeongcheon, Cheonan, Chungcheongnam-do, and Chungbu Expressway in Ochang-eup, Cheongju, Chungcheongbuk-do. The average concentration of black carbon measured in Eunseok Mountain was $1.64{\mu}g/m^3$ and the average concentration near the Chungbu Expressway was measured to be $3.86{\mu}g/m^3$. The average concentrations of four places inside campus ranged from 1.37 to $2.67{\mu}g/m^3$. The concentration of black carbon at all places tended to be slightly decreased according to the altitude, but the influence of pollution source, geometry, wind speed, and wind direction are thought to be larger than the effect of altitude. Effect of air flow caused by drone flight on the measurement of black carbon were investigated and it resulted in that the measurement of BC concentration was affected by less than 5%.

• Carbon letters
• /
• 제14권3호
• /
• pp.175-179
• /
• 2013

Isolated single wall carbon nanotubes (SWCNTs) were synthesized by chemical vapor deposition (CVD) using a liquid precursor (xylene) as a carbon source. Transmission electron microscopy (TEM) and atomic force microscopy confirmed the isolated structure of the SWCNTs. Micro-Raman measurements showed a tangential G-band peak ($1590cm^{-1}$) and radial breathing mode (RBM) peaks ($150-240cm^{-1}$). The tube diameters determined from the RBM frequencies are in good agreement with those obtained from TEM. The chirality of the isolated SWCNTs could be determined based on the energy of the laser and their diameter. A further preliminary study on the nitrogen doping of isolated SWCNTs was carried out by the simple use of acetonitrile dissolved in the precusor.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 추계총회 및 학술대회 논문집
• /
• pp.163-164
• /
• 2012

Carbon coils could be synthesized using $C_2H_2/H_2$ as source gases and $SF_6$ as an incorporated additive gas under thermal chemical vapor deposition system. The substrate with oxygen incorporation and the substrate without oxygen incorporation were employed to elucidate the effect of substrate on the formation of carbon coils. The characteristics (formation densities, morphologies, and geometries) of the deposited carbon coils on the substrate were investigated. In case of Si substrate, the microsized carbon coils were dominant on the substrate surface. While, in case of oxygen incorporated substrate, the nanosized carbon coils were prevail on the substrate surface. The cause for the different geometry formation of carbon coils according to the different substrates was discussed in association with the different thermal expansion coefficient values between the substrate with oxygen incorporation and the substrate without oxygen incorporation.

• Bulletin of the Korean Chemical Society
• /
• 제35권2호
• /
• pp.401-406
• /
• 2014

Metal-containing carbon nanocomposites have shown significance promise in the area of energy storage, heterogeneous catalysis and material science because of their morphology and combined properties. Phosphorus-doped carbon nanocomposites with gold nanoparticles were developed by applying a simple impregnation method and metal deposition technique. Gold-phosphorus supported carbon nanocomposites with two sized (25 and 170 nm) were prepared from economical petroleum pitch residue as the carbon source using an advanced silica template method. These nanocomposites will lead to the novel applications in the field of material science with the combined properties of gold, phosphorus and carbon. The newly prepared gold phosphorus supported carbon nanocomposites were fully characterized using a range of different physico-chemical techniques.

• 한국전기전자재료학회논문지
• /
• 제19권5호
• /
• pp.477-479
• /
• 2006

Carbon films was grown on Si substrates using the method of electrolysis for methanol liquid. Deposition parameters for the growth of the carbon films were current density for the electrolysis, methanol liquid temperature and electrode spacing between anode and cathode. We examined electrical resistance and the surface morphology of carbon films formed under various conditions specified by deposition parameters. It was clarified that the high electrical resistance carbon films with smooth surface morphology are grown when a distance between the electrodes was relatively wider. We found that the electrical resistance in the films was independent of both current density and methanol liquid temperature for electrolysis. The temperature dependence of the electrical resistance in the low resistance carbon films was different from one obtained in graphite.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.553-554
• /
• 2006

Carbon films was grown on Si substrates using the method of electrolysis for methanol liquid. Deposition parameters for the growth of the carbon films were current density for the electrolysis. methanol liquid temperature and electrode spacing between anode and cathode. We examined electrical resistance and the surface morphology of carbon films formed under various conditions specified by deposition parameters. It was clarified that the high electrical resistance carbon films with smooth surface morphology are grown when a distance between the electrodes was relatively wider. We found that the electrical resistance in the films was independent of both current density and methanol liquid temperature for electrolysis. The temperature dependence of the electrical resistance in the low resistance carbon films was different from one obtained in graphite.

• 한국동물학회:학술대회논문집
• /
• 한국동물학회 1999년도 한국생물과학협회 학술발표대회
• /
• pp.11-11
• /
• 1999

;It has been reported that suspension-cultured rice cells grown on mixed carbon sources of glucose (GIc) and acetate exhibited diauxic growth in which acetate was the preferred carbon source (Lee and Lee, 1996). Carrot (Daucus carota L.) suspension cells, showing a diauxic growth very similar to that of rice cells, were used to delineate the mechanisms underlying this preferential use of acetate over GIc. Uptakes of both GIc and 3-0-methylglucose (3-0MG), a non-metabolizable GIc analogue, were similarly inhibited when acetate or butylate, weak acids which are capable of transporting protons into the cytosol, were present in the uptake assay mixture containing cells harvested during the GIc-utilizing second growth phase. Inhibition of GIc uptake by these weak acids was similar when equivalent experiments were carried out with isolated plasma membranes. It was further shown that Glc uptake, which requires a proper proton gradient across the plasma membranes, was inhibited during the first growth phase by acetate-mediated alkalization of growth medium and/or simultaneous acidification of cytosol. This study strongly suggests that Glc utilization in plant cells is inhibited by co-presenting carbon source(s) which can alter the proton gradient across the plasma membrane. We further examined diauxic growth in culture containing GIc and malate. Unlike the case in the culture with GIc and acetate, carrot cells used GIc first. Malate was utilized only after Glc is depleted from medium. These results indicate that GIc can be a preferred or less-preferred carbon source depending on the competing carbon source. It was noted that malate was not directly taken up by cells. Instead it was converted extracellularly into fumarate which was subsequently transported into cells. During the malate-growth phase malate uptake was negligible, and fumarate uptake was active and pH-sensitive. It was shown that fumarase released into medium was responsible for the extracellular conversion of malate into fumarate. An immunoblot experiments showed that fumarase antibody raised against Arabidopsis fumarase provided positive signals only in medium in malate culture, not in fumarate or GIc cultures. This study demonstrates the first example in that fumarase, a mitochondria marker enzyme, can be present in places other than mitochondria.ndria.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 춘계학술발표대회
• /
• pp.251-254
• /
• 2000

Effect of carbon sources including agro-industrial byproduct on cell growth and production of curdlan by Agrobacterium sp. ATCC 31749 was investigated. Maximal production of curdlan was obtained when the carbon source was sucrose. The conversion rate of curdlan from 2% (w/v) sucrose was 59%. Glucose, mannose and maltose were also found to be good carbon sources for production of curdlan. Production of curdlan increased up to 3% (w/v) glucose as the carbon source and then decrease as the concentration of glucose increased. The major components of agro-industrial byproduct (AIB) were glucose, maltose, and maltose, and maltotriose. Agrobacterium sp.ATCC 31749 utilized up to 25% (v/v) AIB and produced curdlan with 29.8g/1.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.791-793
• /
• 2009

Hydrogen has been recognized of the energy source for the future, in terms of the most environmentally acceptable energy source. A pressurized fluidized bed reactor made of carbon steel with 0.076 m I.D. and 1.0 m in height was employed for the thermocatalytic decomposition of methane to produce amount of $CO_2$ - free hydrogen with validity from a commercial point of view. The fluidized bed was proposed for withdrawing of product carbons from the reactor continuously. The methane decomposition rate with the carbon black N330 catalyst was rapidly reached a quasi-steady state and remained for several hour. The methane thermocatalytic decomposition reaction was carried out at the temperature range of 850 - 950 $^{\circ}C$, methane gas velocity of 2.0 $U_{mf}$ and the operating pressure of 1.0 -3.0 bar. Effect of operating parameters such as reaction temperature, pressure on the reaction rates was investigated and predicted the effect of a change in conditions on a chemical equilibrium thermodynamically, according to Le Chatelier's principle.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.51-51
• /
• 2011

We have grown nanocrystalline graphite on sapphire substrate by using solid carbon source molecular beam epitaxy. Changes of structure from amorphous carbon to nanocrystalline graphite controlled by the growth temperature have been investigated by Raman spectroscopy. Raman spectra show D, G, and 2D peaks, whose intensities vary on the growth temperature. Atomic force microscopy reveals that the surface is very flat. Sapphire substrates of different cutting direction produce similar results. Simulations suggest that the interaction between carbon and oxygen causes disorders. Electrical transport measurements exhibit a Dirac-like peak, including a carrier type change by an external gate voltage bias.