• Journal of the Korea Safety Management & Science
• /
• v.20 no.3
• /
• pp.21-26
• /
• 2018

This paper describes result of a study on safety against a fire of charging cable for mobile phone for vehicle. Combustion on the USB cable in the car was happened while driving. Gas coming from the burning USB cable could be a reason which can make a secondary car accident since the driver also can be embarrassed while driving. In order to prevent a secondary car accident connected on the road, to research a reason why USB cable can emit gas and be burned in charging. We did simulation test with abnormal fault condition for the electronic component on the board in the USB cable. So we get the result from abnormal fault condition simulation test, for instance, shorted test for output terminal of 8 pin switch, shorted test for chip resistor after thermal aging in the condition $25^{\circ}C$, 93 % RH during 48 hours. To analysis the result of all test, Combustion on the USB cable was not the 8 pin but other electrical component such as a chip resistor. Therefore we guess that the reason for USB cable combustion in charging in a car was not 8 pin and a LED but another defective component.

• Journal of the Ergonomics Society of Korea
• /
• v.11 no.1
• /
• pp.111-118
• /
• 1992

Assuming the majority of car accidents are due to driver errors, we due rear-end collisions which occurred in the State of Washington, USA, in 1982, 1983, and 1984, to study human responsible involvement associated with the sex and age of drivers. Rear-end collisions involving two passenger cars are included in this study. The driver of a car which struck the rear end of another car is considered responsible for the accident, and the driver of a car which was struck in the rear end is not considered responsible for the accident. In addition to male and female drivers, we used three different age groups: 16 to 24 years old, 25 to 34 years old, and 35 years or older. Hence, six diferent groups of drivers are considered in this study.

• Journal of Urban Science
• /
• v.6 no.2
• /
• pp.59-72
• /
• 2017

Studies on the calculation of accident costs include the approach on calculating damage costs covering all accidents regardless of first or secondary party and the one calculating damage costs generated by a single victim. These two approaches have a limitation of considering a subject for costs analysis as a single entity. In addition, research on estimating the interaction effects caused in the relationship between diverse traffic accident features and factors remains inadequate since most studies focused on calculating costs incurred in a single entity such as a victim, damaged building, or social organization in charge of managing car accident. This study intends to identify the expected range of old age where a specific interaction effect would remain, compare accidents between old age section and the entire age section, and discover an exogenous variable to be applied in accident drop effects in senior people and reduced benefits by calculating and testing additional accident costs in case the first party and the second party all pertain to the senior age section. By classifying the entire accidents caused by old drivers according to the types of cars, significant coefficients representing the influence that affects car accidents according to the characteristics are calculated and set them as the representative variables by selecting top variable in accordance with from low to high order. Furthermore, characteristics on five age groups such as a group of over 65 and less than 70, a group of over 70 and less than 75, a group of over 75 and less than 80, a group of over 80 and less than 85, and a group of over 85 are elicited and compared them with these preselected accident characteristics variables, thereby identifying what changing effects come out.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6D
• /
• pp.587-597
• /
• 2010

When a car accident occurs, people who had an accident are not free from civil and criminal issues so that the accident investigator should reenact and analyze the accident situation accurately. In addition, the obtained documents through the analysis of such car accident occurrence and related factors have to be used to carry out the improvement of the areas that has numerous car accidents and complementary actions. The vehicle speed, accelerating force, braking power are currently known as the most affecting factors in accordance with many car accidents, traffic facilities, road design, etc. The vehicle's performance and rode friction coefficient road surface friction coefficient are affecting the most closely in this field. Especially, once the estimate of the speed of the accident moment relating to main eleven articles of Traffic Accident Exemption Law is very important and accuracy is required. However, currently the researches of these matters have not made exclusively yet in Korea. In this study by reflecting this current situation, until the sudden braking history is found from the car's sudden braking, it estimates accurately the transient brake time and rode friction coefficient by measuring a time of transient brake time through the precision speed detector (Vericom VC2000PC). The analysis of the experimental results calculated the transient brake time and friction coefficient to fit into the purpose of this study in the basis of different kind of various special purpose asphalt pavement and slip-prevention pavement and provided the fundamental data.

• Journal of Auto-vehicle Safety Association
• /
• v.9 no.4
• /
• pp.14-19
• /
• 2017

The mortality rate of car-pedestrian accidents is quite high compared to the frequency of accident. Recently, governments and insurance companies tend to establish and implement new safety standards for pedestrian protection such as EURO-NCAP and K-NCAP. The performance for the pedestrian protection has been gradually improved, but it is still insufficient. Therefore, various studies for the pedestrian protection are being carried out. The car-pedestrian accident is simulated in order to study to the upper legform test of the EURO-NCAP protocol. A pedestrian dummy model is employed and the results are discussed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.646-648
• /
• 2014

This paper proposes the color of car that accident occurs in color from the highest probability to lowest probability. This is talking about the color difference of advancing color and receding color. The color of the accident-prone is many receding color that actually seem to be far more. Advanced color that seems to be closer than the actual color find out that accident is less.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.6
• /
• pp.659-677
• /
• 2022

Hydrogen is emerging as a next-generation energy source and development and supply of FCEV (hydrogen fuel cell electric vehicle) is expected to occur rapidly. Accordingly, measures to respond to hydrogen car accidents are required and researches on the safety of hydrogen cars are being actively conducted. In this study, In this study, we developed a hydrogen car accident scenarios suitable for domestic conditions for the safety evaluation of hydrogen car in road tunnels through analysis of existing experiments and research data and analyzed and presented the hazard distance according to the accident results of the hydrogen car accident scenarios. The accident results according to the hydrogen car accident scenario were classified into minor accidents, general fires, jet flames and explosions. The probability of occurrence of each accident results are predicted to be 93.06%, 1.83%, 2.25%, and 2.31%. In the case of applying the hydrogen tank specifications of FCEV developed in Korea, the hazard distance for explosion pressure (based on 16.5 kPa) is about 17.6 m, about 6 m for jet fire, up to 35 m for fireball in road tunnel with a standard cross section (72 m²).

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.175-181
• /
• 2017

In this paper, we describe a design and development of car HUD(Head-Up-Display) navigation system using a Raspberry Pi. Car drivers can't concentrate on driving due to the use of various electronic devices, especially the car navigation systems installed in the cars. Therefore, car accident caused by not concentrating on the driving views is one of the most common accident types. In order to prevent the problems, HUD technology is used to help the driver to secure front views, thereby to minimize the traffic accidents caused by neglecting forward views. In this research, we propose the design and development techniques of a HUD navigation system using Raspberry Pi, and we believe that the commerical use of HUD navigation will grately reduce the risk of many car accidents.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.1
• /
• pp.52-63
• /
• 2008

The side collision reconstruction algorithm is developed using three dimensional car crash analysis. Medium size passenger car is modeled for finite element analysis. Total 24 side collision configurations, four different speed and six different angle, are set up for making side collision database. Deformation index and degree index are built up for each collision case. Deformation index is a kind of deformation estimate averaging displacement of side door of crashed car from finite element analysis result. Angle index is constructed measuring deformed angle of crashing car. There are two kinds of angle index, one is measured at driver's side and the other is measured at passenger's side. Also a collision analysis information in side of cars is used for giving a basis for scientific and practical reason in a reconstruction of the car accident. The analysis program, LS-DYNA3D is utilized for finite element analysis program for a collision analysis. Those database are used for side collision reconstruction. Side collision reconstruction algorithm is developed, and applied to find the collision conditions before the accident occurs. Three example collision cases are tried to check the effectiveness of the algorithm. Deformation index and angle index is extracted for the case from the analysis result. Deformation index is compared to the established database, and estimated collision speed and angle are introduced by interpolation function. Angle index is used to select a specific collision condition from the several available conditions. The collision condition found by reconstruction algorithm shows good match with original condition within 10% error for speed and angle. As a result, the calculation from the reconstruction of the situation is reproducing the situation well. The performance in this study can be used in many ways for practical field using deformation index and degree index. Other different collision situations may be set up for extending the scope of this study in the future.

• Journal of Korea Society of Industrial Information Systems
• /
• v.29 no.1
• /
• pp.91-105
• /
• 2024

Car accidents occur as a result of collisions between vehicles, leading to both vehicle damage and personal and material losses. This study developed a vehicle accident detection model based on 2,550 image frames extracted from car accident videos uploaded to YouTube, captured by CCTV. To preprocess the data, bounding boxes were annotated using roboflow.com, and the dataset was augmented by flipping images at various angles. The You Only Look Once version 8 (YOLOv8) model was employed for training, achieving an average accuracy of 0.954 in accident detection. The proposed model holds practical significance by facilitating prompt alarm transmission in emergency situations. Furthermore, it contributes to the research on developing an effective and efficient mechanism for vehicle accident detection, which can be utilized on devices like smartphones. Future research aims to refine the detection capabilities by integrating additional data including sound.