• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.1
• /
• pp.153-159
• /
• 2012

Driver's view has blind spot of automobile surroundings due to physical components of automobile architecture. Obstacles on blind spot are the cause of car destruction and car accidents. Cars which produced in recent have obstacle detection sensors and rear view cameras which provide information of obstacles on the blind sopt, and have also AVM(Around View Monitoring) which provides automobile surroundings for driver's safe driving. During a low-speed travel while parking or moving in a narrow street, a driver get help for safe driving by taking information of automobile surroundings using the above-mentioned devices. In this paper, we present a design and implementation of a 4-sided monitoring (4SM) system, which helps a driver see an integrated view of a vehicle's perimeter at a glance, using a car PC connected to four cameras installed on the front, rear, left, and right sides.

• Journal of Korean Society of Transportation
• /
• v.25 no.6
• /
• pp.89-97
• /
• 2007

The car-dependent traffic system based on highly advanced industrialization and economic growth causes various urban problems including traffic jams, energy consumption, air pollution, noise, car accidents and other issues. Particularly in urban areas, air pollution from motor vehicles is worse than pollution from past industrialization. In this study, therefore, the authors grasped car exhaust reduction effects by using microsimulation and those traffic policies that could make cars flow smoothly, reducing the air pollution in urban areas through analysis on profitability. As a result, the weekday-based car using system has been found most effective as it does not need investment cost. However, this system may be socially unacceptable, as it requires the government to change driver behavior. Therefore, the government needs to first reach a consensus with the citizens regarding this system. This system will also be effective with other alternatives. As a follow-up study, the authors will research citizens' perceived impacts of car exhaust on air pollution through a study on preference and grasp the possibility of applying these study results to real traffic policies.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.1
• /
• pp.73-80
• /
• 2016

The Car License Plate Recognition(: CLPR) is required in searching the hit-and-run car, measuring the traffic density, investigating the traffic accidents as well as in pursuing vehicle crimes according to the increasing in number of vehicles. The captured images on the real environment of the CLPR is contaminated not only by snow and rain, illumination changes, but also by the geometrical distortion due to the pose changes between camera and car at the moment of image capturing. We propose homographic transformation and intensity histogram of vertical image projection so as to transform the distorted input to the original image and cluster the character and number, respectively. Especially, in this paper, the Multilayer Perceptron Algorithm(: MLP) in the CLPR is used to not only recognize the charcters and car license plate, but also determine the optimized ratio among the number of input, hidden and output layers by the real experimental result.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.11
• /
• pp.2677-2685
• /
• 2013

Car running data collected from the vehicle is a native image data and sensing data of it. Hence, it can be used as a set of objective data based on which events that took place outside the car can be analyzed and determined. In this paper, we designed and implemented a emergency situation detection system to sense, store, and analyze signals related to car movements, driver's various operation states, collision pulse, etc when a car collision accident occurs on the actual road by sensing and analyzing the car movements and driver's operation status. The suggested system provides information on the driver's reaction right before the collision, operation state of the vehicle, and physical movement. The collected and analyzed data on vehicle running can be utilized to clarify the cause of a collision accident and to handle it in a just manner. Besides, it can contribute to grasping and correcting wrong driving habits of the driver and to saving.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.3
• /
• pp.352-357
• /
• 2016

More recently, workers and passengers of casualties has increased by rear-end collisions of unexpected while working on the road. Recently attracted air chamber TMA mounting car accidents which occurred in 3 years, and analyzed the effect of reducing the shock absorption and protection performance and casualties. There is a risk of the vehicle AIS4 more injury of high five accidents of casualties risk, also, was the analysis that there is risk of death was avoided by the air chamber TMA and SGT. Therefore, by mounting the TMA in the rear-end accident, so you can reduce the death and casualties, it must be increased this of attach rate for road construction vehicle.

• Journal of Multimedia Information System
• /
• v.3 no.3
• /
• pp.69-76
• /
• 2016

Currently, research on more convenient and safer cars for drivers and passengers, the intelligent cars, are being actively conducted. The researches involve designing systems that intelligently minimize physical damages caused by car accidents, not just pursuing passive safety measures like airbags or safety belts. However, there are many cases around the world where airbags cannot be activated in times of accidents and it is difficult for consumers to check if their airbags will be activated, especially for the old-style cars. Thus, in this paper, a base technology for an application that can determine whether the airbags will actually be actuated at a critical moment based on the mechanical calculations is being introduced.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.2 no.2
• /
• pp.111-114
• /
• 1979

Human Engineering is the new science that studies tile function and the characteristic of human. It is purpose to design machine equipments for him to be able to manipulate those, exactly, safely and easily. This study will introduce that new science in traffic problems and will be done as follows. 1. The Presentation of Problems: 2. Human Engineering and Accurrence process of traffic accidents. 3. Human Engineering and aptitude analysis 4. Conclusion In this paper, driver is not the man who drives a car, is the man who is able to adapt himself to road, and traffic environment. There is a limitation in Human faculty, especially, in the power of attention. Therefore, this paper will be studied to show that it is seeking the ability needed by traffic analysis as well as getting ability of aptitude to attribute to prevention of traffic accidents.

• Journal of Auto-vehicle Safety Association
• /
• v.7 no.1
• /
• pp.40-44
• /
• 2015

In recent years, WorldSID dummy has been continuously developed and investigated to be a better represent biolfidelic ATD as well as a device for replacement of the current existing EuroSID-2. In Korea, the side impact accident is one of the major severe accidents in terms of numbers of accidents and fatality. Since 2003, 50kph 90degree side crash test has been initiated as a safety standard with EuroSID-1 at the first stage and also same time 55kph impact speed test has been conducted as a part of KNCAP program. Currently only EuroSID-2 is accepted as a regulatory tool for vehicle certification and KNCAP. In order to make use of WorldSID of KNCAP in the distant futuer the tests with WorldSID is conducted experimentally.

• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.686-693
• /
• 2003

An intensive study was conducted for crashworthiness structural design of recently developed Korean High Speed Train. Two nam design concepts are setup to protect the both crews and passengers from serious injury at heavy collision accidents, and to reduce damages of the train itself at light collision accidents. For occupant protection a collision against a movable 15 tons rigid obstacle at 110 kph and a train-to-train collision at 30 kph were selected as accident scenarios for the heavy collisions based on the train accident investigations. A train-to-train collision at 8 kph was used for the light collisions. The crashworthiness behaviors of KHST have been evaluated numerically using the finite element method. Also, one-dimensional collision analyses show good crashworthy responses in a full rake consist and 3-dimensional shell element analyses do in the front-end structures of the power car. Occupant analyses and sled tests demonstrated that KHST performs well enough to protect occupants under the considered accident scenarios.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.321-324
• /
• 2001

The accidents in a railway level crossing where passengers or vehicles pass on the track went through by the train with a inherent high rate on incidents lead to a vast economic damage on people and material resources. So, many protection equipments are placed on the railway crossing to prevent those kind of accidents. But there is a limit to control driver's rough activity, passenger's careless or an intentional accident. This study is trying to ensure the safety in railway crossing by providing the information on train's speed and expected passing time on the railroad to a road traffic control system or car driver. Additionally, this system has been studying the railway level crossing system concerning ITS to support harmonious traffic flow.