• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.90-99
• /
• 2004

Stone column is one of the soft ground improvement method, which enhances ground conditions through ground water draining, settlement reducing and bearing capacity increasing complexly by using crushed stone instead of sand in general vertical drain methods. In recent, general construction material, sand is in short of supply, because of the unbalance of demand and supply. Also, the bearing capacity improving effect of stone column method is needed in many cases so the bearing capacity estimation is considered as important point. Nevertheless, adequate estimation methods to predict bearing capacity of stone column considering stone column and improving ground behavior reciprocally is not yet prepared. To contribute this situation, bearing capacity behavior of stone column were simulated as numerically on various property cases of crushed stone and surrounded ground. Through the numerical analysis of simulation results, bearing capacity behavior prediction formula was suggested. This formula was verified by comparing the prediction result with in situ test.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2006년도 학술발표회 논문집
• /
• pp.209-216
• /
• 2006

For evaluation of building performance, a nonlinear dynamic capacity of the building is a key parameter. In this study, an reinforced concrete special moment resisting frame building was chosen to study the process of determining the nonlinear dynamic capacity. The building, which was designed by IBC 2003 representing new codes, was composed of special moment resisting frames in the perimeter and internal frames inside the building. The capacity, which is inter-story drift capacity, consists of two categories, local and global collapses. Global collapse capacity was determined by incremental dynamic analysis. Local collapse capacity was determined by the same method except for utilizing damage index. In audition to this, it was also investigated that the effect of including internal frames designed by gravity load in the analysis. Results showed that the damage index is a useful tool for determining local collapse. Furthermore, including the internal frames with special frames in the analysis is very important in determining the capacity of a building so both must be considered at the same time.

• 수산해양기술연구
• /
• 제43권4호
• /
• pp.339-346
• /
• 2007

Estimating fishing capacity is one of current hot issues in the international fisheries. It is because that increased fishing capacity has caused not only fish stocks to be reduced, but also additional fishing costs to be incurred without additional incomes, which resulted in decrease of economically viability of fisheries. In order to solve this problem, FAO adopted 'the International Plan of Action for the Management of Fishing Capacity' in 1999 and recommended that member countries to measure fishing capacity and to implement the domestic action plan to reduce excess fishing capacity. This study is aimed at assessing fishing capacity of the octopus coastal trap fishery(OCTF) using data envelopment analysis(DEA) which is a method recommended by FAO. The DEA results on 10 individual OCTF vessels showed that the capacity utilization(CU) was a 0.93 on average, indicating some differences in CU among vessels(0.79-1.0). In addition, results of the sensitivity analysis revealed that under the current level of catch, the gross tonnage, horse power, days fished, and traps per trip could be reduced by 35%, 33%, 16%, and 18% on average, respectively.

• Structural Monitoring and Maintenance
• /
• 제9권1호
• /
• pp.81-105
• /
• 2022

The use of concrete filled steel tube (CFST) column is widely accepted due to its property of high axial load carrying capacity, more ductility and more resistant to earthquake specially using in bridges and high-rise buildings. The initial imperfection (δ) that produces during casting or fixing causes the reduction in load carrying capacity, this is the reason, experimental capacity is always less then theoretical one. In this research, the effect of δ on load carrying capacity and behavior of concrete filled steel tube (CFST) column have been investigated by numerically simulation of large number of models with different δ and other geometric parameters that include length (L), width (B), steel tube thickness (t), f'_c and f_y. Finite element analysis software ANSYS v18 is used to develop model of SCFST column to evaluate strength capacity, buckling and failure pattern of member which is applied during experimental study under cyclic axial loading. After validation of results, 42 models with different parameters are evaluated to develop empirical equation predicting axial load carrying capacity for different value of δ. Results indicate that empirical equation shows the 0 to 9% error for finite element analysis Forty-two models in comparison with ANSYS results, respectively. Empirical equation can be used for predicting the axial capacity of early estimating the axial capacity of SCFT column including 𝛿.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권1호
• /
• pp.253-271
• /
• 2017

In this paper, considering that perfect channel state information (CSI) is hard to achieve in practice, the downlink capacity of distributed antenna systems (DAS) with imperfect CSI and multiple receive antennas is investigated over composite Rayleigh fading channel. According to the performance analysis, using the numerical calculation, the probability density function (PDF) of the effective output SNR is derived. With this PDF, accurate closed-form expressions of ergodic capacity and outage probability of DAS with imperfect CSI are, respectively, obtained, and they include the ones under perfect CSI as special cases. Besides, the outage capacity of DAS in the presence of imperfect CSI is also derived, and a Newton's method based practical iterative algorithm is proposed to find the accurate outage capacity. By utilizing the Gaussian distribution approximation, another approximate closed-form expression of outage capacity is also derived, and it may simplify the calculation of accurate outage capacity. These theoretical expressions can provide good performance evaluation for downlink DAS for both perfect and imperfect CSI. Simulation results verify the effectiveness of the theoretical analysis, and the system capacity can be improved by increasing the receive antennas, and decreasing the estimation error or path loss. Moreover, the system can tolerate the estimation error variance up to about 0.01 with a slight degradation in the capacity.

• 경영과학
• /
• 제19권1호
• /
• pp.29-38
• /
• 2002

Due to the rapid increase In the Internet traffic volume, ISPs are faced with the definite need of the expansion of server capacity. In order to Provide prompt services for customers and still prevent excessive facility cost, it is critical to determine the optimum level of internet server capacity. The purpose of this Paper is to provide a simple but effective strategy on the expansion of servers capacity according to the increase in internet traffic. We model an internet server as an M/G/m/m queueing system and derive an efficient method to compute the loss probability which, In turn, Is used as a basis to determine proper server capacity. The Process of estimating the traffic parameter values at each server based on log data analysis is also given. All the procedures are numerically demonstrated through the process of analyzing actual log data collected from a game company.

• 한국도로학회논문집
• /
• 제16권3호
• /
• pp.109-117
• /
• 2014

PURPOSES : This study analyzes the available working time at work-zone on the Expressway in accordance to the new capacity manual. METHODS : Sensitivity analysis on variables were conducted to calculate the adjusted capacity at work-zone based on previous researches. RESULTS : The main factors which affect available working time at the work-zone were its capacity, number of lanes, terrain and lane width. Other factors have minimal effect on the available working time. Based on the analysis, a calendar of lane closures was suggested. CONCLUSIONS : A series of studies concluded that the capacity at work-zone in the new capacity manual reduced to 76-82% of the existing manual. As such, the available working time decreased. Furthermore, the factors affecting the available working time needs to be considered when making a plan to rehabilitate the distressed pavement.

• Environmental Engineering Research
• /
• 제17권2호
• /
• pp.117-122
• /
• 2012

A central composite design and response surface methodology were applied to investigate the optimum conditions for maximum adsorption capacity in activated alumina as an adsorbent. The optimized conditions were determined for adsorption capacity using variables of flow rate and temperature. It was found that flow rate and temperature greatly influenced the adsorption capacity, as determined by analysis of variance analysis of these variables. Statistical checks indicated that second order polynomial equations were adequate for representing the experimental values. The optimum conditions for adsorption capacity were $0^{\circ}C$ and 2,718 mL/min, with the estimated maximum adsorption capacity of 17.82%. The experimental adsorption capacity was 17.75% under these optimum conditions, which was in agreement with the predicted value of 17.82%.

• 한국지진공학회논문집
• /
• 제7권5호
• /
• pp.67-73
• /
• 2003

현 도로교의 내진해석은 구조물이 하중 이상의 강도를 갖도록 하는 하중기반해석법에 근거하고 있다. 본 연구에서는 이러한 하중기반해석의 대안책으로 구조물의 성능평가 대상을 변위로 하는 변위기반해석의 일종인 역량스펙트럼법을 제시하였다. 하중기반해석에서 내진설계가 수행되어진 기존 철근콘크리트 교각에 대하여 역량스펙트럼법에 의한 내진성능을 평가하였다. 그 결과, 역량스펙트럼법은 간편하고 신속하게 구조물의 비탄성 응답을 현실적으로 평가할 수 있었으며 비탄성 응답을 일으키는 다양한 지반운동 수준에 대해 구조물에 발생하는 변위를 평가할 수 있었고, 기존 구조물의 내진성능에 대한 평가나 신설구조물의 성능목표에 대한 설계검증에 효율적으로 적용 가능하였다.

• 보건교육건강증진학회지
• /
• 제29권1호
• /
• pp.39-57
• /
• 2012

Objectives: This study was to measure community capacity using individual-level and organizational-level capacity indicators and illuminated the relationship of community capacity and self-rated health status in two regions in Seoul, Korea. Methods: The data from individual surveys were obtained by quota sampling the residents of two autonomous gu in Seoul (N=1,000). The data from organizational surveys were obtained by snowball sampling lists of organizations in the possession of gu offices with a sampling frame (N=153). The survey tools were 6 indicators regarding residents' social capital and a sense of community and 5 indicators regarding community-based organizations and their networks. The analysis methods consisted of the effect of the components of capacity on health status and social network analysis. Results: As for capacity on individual levels, while D-gu was mainly developed inn individual capacity in terms of social interaction, Y-gu was stronger in a sense of community and cohesion among residents. As for capacity on organizational levels, Y-gu was more developed than was D-gu in associational networks. Conclusion: It is necessary to develop health promotion program per community and to strengthen partnerships with and among grassroots organizations based in local communities through the measurement of community capacity.