• Bulletin of the Korean Chemical Society
• /
• 제18권1호
• /
• pp.56-61
• /
• 1997

Lead zirconate titanate (PZT) thin fills were deposited onto the Pt/Ti/SiO2/Si substrate by the pulsed laser deposition with the second harmonic wavelength (532 nm) of Nd:YAG laser. In order to determine the optimum conditions for the film deposition, the phase of the films were investigated as functions of ambient oxygen pressure, substrate temperature, and laser fluence. Also the chemical composition analysis was conducted for the PZT films deposited under various ambient oxygen pressure. When the distance between substrate and bulk PZT target is set to 20 mm, the optimum conditions have been determined to be 3 torr of oxygen pressure, 1.5 J/cm2 of laser fluence, and 823-848(±10) K range of substrate temperature. At these conditions, perovskite phase PZT films were obtained on platinized silicon. The chemical composition of the films is very similar to that of PZT bulk target. The physical structure of the deposited films analyzed by scanning electron microscopy shows a columnar morphology perpendicular to the substrate surface. Capacitance-Voltage hysteresis loop measurements show also a typical characteristics of ferroelectric thin film. The dielectric constant is found to be 528 for the 0.48 μm thickness of PZT thin film.

• 전기전자학회논문지
• /
• 제23권2호
• /
• pp.407-412
• /
• 2019

LED 조명은 많은 장점으로 인하여 다양한 분야에서 사용이 점점 증가되고 있다. 특히 플라이백 컨버터는 전력밀도와 구조적 단순성 그리고 소형화가 가능하여 많은 컨버터 설계자들에게 LED 조명용 드라이버로 선택되어지고 있다. 또한 컨버터의 직류출력전압을 안정화하기 위하여 저렴한 가격의 정전용량이 큰 전해커패시터를 사용한다. 전해 커패시터를 갖는 전력변환기를 LED 조명시스템에 적용할 경우에 일반적으로 LED의 수명이 짧아지는 결과를 가져온다. 제안하는 논문은 LED 수명연장과 컨버터 출력리플을 감소시키기 위하여 소용량의 필름 커패시터 LC 필터를 컨버터에 적용하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권1호
• /
• pp.61-66
• /
• 2007

A transmission class high-temperature superconducting(HTS) power cable system is being developed in Korea. For insulation design of this cable the grading method of insulating paper is proposed. Two kinds of laminated polypropylene paper that has different thickness has been used as the electrical insulation material. The use of graded insulation gives improved mechanical bending properties of the cable. In a HTS cable technology the terminations are important components. A HTS cable termination is energized with the line-to-ground voltage between the coaxial center and outer surrounding conductors. in the axial direction. There is also a temperature difference from ambient to about 77 K. For insulation design of this termination, glass fiber reinforced plastic(GFRP) was used as the insulation material of the termination body, and the capacitance-graded method is proposed. This paper will report on the experimental investigations on impulse breakdown and surface flashover characteristics of the insulation materials for insulation design of a transmission class HTS power cable and termination. Based on these experimental data, the electrical insulation design of a transmission class HTS power cable and termination was carried out.

• 한국진공학회지
• /
• 제10권1호
• /
• pp.44-50
• /
• 2001

전자빔증착법과 이온빔의 도움을 받는 전자빔 증착법(ion beam assisted electron beam deposition; IBAED)법으로 비정질 Si(-200nm) 박막을 p-Si 기판위에 성장하고 이 두 구조를 급속열처리산화(Rapid Thermal Oxidation; RTO)를 시킴으로서 $SiO_2$/나노결정 Si(nanocrystal Si)/p-Si구조를 형성하였다. 그 후 시료 위에 Au 막을 증착함으로서 최종적으로 나노결정이 함유된 MOS(metal-oxide-semiconductor)구조를 완성하였다. 이 MOS구조내의 나노결정 Si의 전하충전 특성을 바이어스 sweep 비율을 변화시키면서 Capacitance-Voltage(C-V) 특성을 측정하여 조사하였다. 전자빔증착시료의 경우에는 $\DeltaV_{FB}$(flatband voltage shift)가 1V 미만의 작은 C-V 이력곡선이 관측된 반면 IBAED 시료의 경우는 $\DeltaV_{FB}$가 22V(2V/s Voltage Sweep비율) 이상인 대단히 큰 C-V 이력곡선이 관측되었다. 전자빔증착중 Ar ion beam을 조사하면 표면 흡착원자이동이 활성화되고 따라서 비정질 Si내에 Si의 핵 생성율이 증가하여 후속 급속열처리산화공정중 이 높은 농도의 핵들이 나노결정 Si으로 자라나게 되고 이렇게 형성된 높은 농도의 나노결정의 전하 충전 및 방전현상이 큰 이력곡선을 나타내는 원인이라고 생각된다. 따라서 IBAED 방법이 고농도의 나노결정 Si을 형성시키는데 유용한 방법이라고 판단된다.

• 한국전기전자재료학회논문지
• /
• 제19권9호
• /
• pp.808-812
• /
• 2006

In this dissertation, Ru-Zr metal gate electrode deposited on two kinds of dielectric were formed for MOS capacitor. Sample co-sputtering method was used as a alloy deposition method. Various atomic composition was achieved when metal film was deposited by controlling sputtering power. To study the characteristics of metal gate electrode, C-V(capacitance-voltage) and I-V(current-voltage) measurements were performed. Work function and equivalent oxide thickness were extracted from C-V curves by using NCSU(North Carolina State University) quantum model. After the annealing at various temperature, thermal/chemical stability was verified by measuring the variation of effective oxide thickness and work function. This dissertation verified that Ru-Zr gate electrodes deposited on $SiO_{2}\;and\;ZrO_{2}$ have compatible work functions for NMOS at the specified atomic composition and this metal alloys are thermally stable. Ru-Zr metal gate electrode deposited on $SiO_{2}\;and\;ZrO_{2}$ exhibit low sheet resistance and this values were varied with temperature. Metal alloy deposited on two kinds of dielectric proposed in this dissertation will be used in company with high-k dielectric replacing polysilicon and will lead improvement of CMOS properties.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.74-77
• /
• 2004

[ $HfO_2$ ] dielectric layers were grown on the p-type Si(100) substrate by metalorganic molecular beam epitaxy(MOMBE). Hafnium $t-butoxide[Hf(O{\cdot}t-C_4H_9)_4]$ was used as a Hf precursor and Argon gas was used as a carrier gas. The thickness of the layers was measured by scanning electron microscopy (SEM) and high-resolution transmission electron measurement(HR-TEM). The properties of the $HfO_2$ layers were evaluated by X-ray diffraction(XRD), high frequency capacitance-voltage measurement(HF C-V), current-voltage measurement(I-V), and atomic force measurement(AFM). HF C-V measurements have shown that $HfO_2$ layer grown by MOMBE has a high dielectric constant(k=19-21). The properties of $HfO_2$ films are affected by various process variables such as substrate temperature, bubbler temperature, Ar, and $O_2$ gas flows. In this paper, we examined the relationship between the $O_2/Ar$ gas ratio and the electrical properties of $HfO_2$.

• 한국재료학회지
• /
• 제29권8호
• /
• pp.463-468
• /
• 2019

The electrical and interfacial properties of $HfO_2/Al_2O_3$ and $Al_2O_3/HfO_2$ dielectrics on AlN/p-Ge interface prepared by thermal atomic layer deposition are investigated by capacitance-voltage(C-V) and current-voltage(I-V) measurements. In the C-V measurements, humps related to mid-gap states are observed when the ac frequency is below 100 kHz, revealing lower mid-gap states for the $HfO_2/Al_2O_3$ sample. Higher frequency dispersion in the inversion region is observed for the $Al_2O_3/HfO_2$ sample, indicating the presence of slow interface states A higher interface trap density calculated from the high-low frequency method is observed for the $Al_2O_3/HfO_2$ sample. The parallel conductance method, applied to the accumulation region, shows border traps at 0.3~0.32 eV for the $Al_2O_3/HfO_2$ sample, which are not observed for the $Al_2O_3/HfO_2$ sample. I-V measurements show a reduction of leakage current of about three orders of magnitude for the $HfO_2/Al_2O_3$ sample. Using the Fowler-Nordheim emission, the barrier height is calculated and found to be about 1.08 eV for the $HfO_2/Al_2O_3$ sample. Based on these results, it is suggested that $HfO_2/Al_2O_3$ is a better dielectric stack than $Al_2O_3/HfO_2$ on AlN/p-Ge interface.

• 한국재료학회지
• /
• 제32권9호
• /
• pp.396-402
• /
• 2022

In this study, surface roughness and interfacial defect characteristics were analyzed after forming a high-k oxide film on the surface of a prime wafer and a test wafer, to study the possibility of improving the quality of the test wafer. As a result of checking the roughness, the deviation in the test after raising the oxide film was 0.1 nm, which was twice as large as that of the Prime. As a result of current-voltage analysis, Prime after PMA was 1.07 × 10 A/cm² and Test was 5.61 × 10 A/cm², which was about 5 times lower than Prime. As a result of analyzing the defects inside the oxide film using the capacitance-voltage characteristic, before PMA Prime showed a higher electrical defect of 0.85 × 10¹² cm^-2 in slow state density and 0.41 × 10¹³ cm^-2 in fixed oxide charge. However, after PMA, it was confirmed that Prime had a lower defect of 4.79 × 10¹¹ cm^-2 in slow state density and 1.33 × 10¹² cm^-2 in fixed oxide charge. The above results confirm the difference in surface roughness and defects between the Test and Prime wafer.

• 한국진공학회지
• /
• 제10권1호
• /
• pp.51-56
• /
• 2001

MFISFET(Metal-ferroelectric-insulator-semiconductor-field effect transistor)에의 적용을 위한 절연체로서 CeO$_2$ 박막을 r.f. magnetron sputtering법에 의해 제조하였다. 스퍼터링시 증착개스는 Ar과 $O_2$를 사용하였으며 산소분압비에 따른 $CeO_2$박막의 결정성 및 전기적 특성에 미치는 영향을 평가하였다. p형-Si(100)기판 위에 $600^{\circ}C$에서 증착된 $CeO_2$ 박막들은(200)방향으로 우선방향성을 가지고 성장하였으며 Ar만으로 증착된 박막의 우선방향성은 증가하였으나 상대적으로 많은 하전입자와 표면 거칠기로 인해 C-V특성에서 큰 이력특성을 보였고 산소분압비가 증가함에 따라 양호한 특성을 보였다. 이것은 이동가능한 이온전하의 감소에 기인한다고 할 수 있다. Ce:O의 비는 모든 박막에서 1:2.22~2.42를 보여 산소과잉의 조성을 나타냈으며 산소분압비에 따라 제조된 박막들의 누설전류값은 100 kV/cm의 전계에서 $10^{-7}$~$10^{-8}$A의 차수를 보였다.

• 한국인터넷방송통신학회논문지
• /
• 제20권6호
• /
• pp.129-135
• /
• 2020

본 연구는 10MHz SC-CUT 크리스탈을 이용한 오븐제어수정발진기(이하 OCXO)의 온도센서 위치에 의한 특성 변화와 주파수 보정방법에 관한 것이다. 기존의 고정밀 10MHz OCXO의 제작 방법은 여러 가지가 있지만, 본 연구에서는 온도센서의 위치를 조정하는 것만으로도 외부 온도 변화에 대한 주파수 안정도 특성이 향상될 수 있다는 것을 보여준다. OCXO의 주파수 특성에 영향을 주는 인자로는 크리스탈에 전달되는 온도, 크리스탈에 인가되는 전압, 발진회로를 구성하는 캐패시턴트 등이 있다. 이러한 인자들에 의한 주파수 변화량을 측정하고 온도 변곡점 측정과 캐패시터 값의 변화를 통하여 OCXO 출력주파수의 보정값 변화를 알아보았다.