• Tribology and Lubricants
• /
• v.22 no.4
• /
• pp.190-195
• /
• 2006

A simple and effective analysis method is presented for gaining a complete transient temperatures on the internal and external surfaces of a 40 mm gun tube subjected to a series of rapid firings. Two series of temperature data for both Hs and As were measured by using two rapid response k-type surface thermocouples near the firing origin and the muzzle. With other available temperature data, patterns of temperature variations of the gun tube as a function of time variable were driven through complete evaluations of the data. It is found that overall temperature gradients which increase exponentially toward saturation temperature, actually consist of a series of linear temperature gradients corresponding to the firing sequences. Under the similar firing sequences, patterns of temperature variations fur both the surface temperatures near the chamber and those near the muzzle were found to have linear temperature gradients with different values and the same response frequencies, i.e. they had peaks and lows in temperatures at the same time. The resultant complete temperature data can be used as the fundamental bases for analysis of thermoelastic properties of the materials such as thermal strain and stress, and f3r the prediction of cannon tube life-time through calculation of wear rate.

• Nutrition Research and Practice
• /
• v.1 no.1
• /
• pp.70-73
• /
• 2007

This study was conducted to determine the nutritional characteristics of horsemeat and bone meal in comparison with those of beef and pork presented by Dietary Reference Intakes For Koreans. Longissimus muscle and large metacarpal bone samples were collected from 20 fattened Jeju horses. Muscle samples were subjected to proximate analysis, assays for fatty acid profile and minerals, and bone samples to mineral assays. Horsemeal had similar levels of protein (21.1 vs 21.0 or 21.1%) and lower levels of fat (6.0 vs 14.1 or 16.1%) compared with beef or pork, respectively. Horsemeat had much higher levels of palmitoleic (8.2 vs 4.4 or 3.3%) and $\alpha-linolenic$ (1.4 vs 0.1 or 0.6%) acids than beef or pork, respectively. Linoleic acid was much higher in horsemeat (11.1%) and pork (10.1%) than in beef (1.6%). PUFA:SFA and n-6:n-3 ratios in horsemeat were 0.29 and 10.2, respectively. There were no big differences in mineral contents between horsemeat, beef and pork. For daily recommended mineral intakes of male adults (Dietary Reference Intakes For Koreans), phosphorus, sodium, potassium, iron, zinc and copper can be provided up to 24, 2.5, 6.7, 21, 26 and 40%, respectively, by 100 g raw horsemeat, but calcium and manganese levels are negligible. Horse cannon bone had much higher mineral contents especially in calcium (10,193 mg/100 g), phosphorus (5,874 mg/100 g) and copper (0.79 mg/100 g). Thiamin, riboflavin, niacin and retinol contents were 0.20, 0.21, 1.65 mg/100 g and $30{\mu}g/100g$, respectively. But ascorbic acid and beta-carotene were not detected. Our data demonstrated that higher levels of palmitoleic and $\alpha-linolenic$ acid in horsemeat than in beef and pork may be beneficial for human health. Horsemeat and bone meal are a good source of some minerals and vitamins.

• Journal of Distribution Research
• /
• v.16 no.3
• /
• pp.77-104
• /
• 2011

As business marketers placed greater emphasis on building long-term relationships, trust has assumed a central role in the development of marketing theory(Dwyer, Schurr, and Oh 1987; Mogan and Hung 1994) and practice(Dertouzos, Lester, and Solow 1989). Marketing research on trust primarily focuses on two targets of trust: supplier firms and their salesperson. Trust of firm and trust of salesperson, though related, represent different concepts(Doney and Cannon 1997). Also, the definition of trust proposed by Ganesan(1994) reflects two distinct components: (1) credibility, which is based on the extent to which the buyer believes that the seller has the required expertise to perform the job effectively and reliably and (2) benevolence, which is based on the extent to which the buyer believes that the seller has intentions and motives beneficial to the buyer when new conditions arise, conditions for which a commitment was not made. The existing marketing research focuses on how trust of a firm and its salesperson has a differential effects on loyalty. However, these extant research pays little attention to the moderating effects that explicitly examine how two trust dimensions of salesperson(credibility and benevolence) affects loyalty of firm. The purpose of this study is to provide new insight into boundary conditions(individualism and industry type) that credibility and benevolence influences loyalty.

• Journal of architectural history
• /
• v.10 no.4 s.28
• /
• pp.57-75
• /
• 2001

The music has influenced on the aesthetics, structure and symbol of the architecture from the ancient to the present. and been to be like architecture. It is important part that through the study of musical proportion by number, which is method of architectural and musical composition, resemblance can be found, music is resemble to architecture and this recognition is general as well in renaissance as architect and musician after that time. Therefore, in this background and aesthetics, the purpose of this study is to research purpose and methodology of the proportion of musical consonance and dissonance used in L. B. Alberti's architecture. At first, for the background of aesthetics this study previewed characteristic of aesthetics arranged by subjectivism and objectivism, and this musical proportion which is applicable for Alberti's architecture was defined. secondly, Alberti's architectural aesthetics (concinnitas) of the higher concept was defined by methodology of the lower concept, and this study described the application of dissonance used by the method of canon in music. thirdly, after according to characteristic of aesthetics in chapter three, proportion system was researched by the more objective, applicable unit in renaissance: roman foot and local unit differs meter in the present, Alberti's architectures was researched by the method of cannon in music.

• Korean Journal of Food Science and Technology
• /
• v.16 no.1
• /
• pp.11-16
• /
• 1984

Rheological properties of waxy and non-waxy rice starch solutions were evaluated with a narrow gap rotational and Cannon Fenske viscometers. The gelatinized rice starch solutions containing 0.2-1.0% starch displayed pseudoplastic flow behavior. At higher starch level, degree of pseudoplasticity of waxy rice starch solutions increased, while that of non-waxy rice did not changed apparently. The consistency coefficient (K) of non-waxy rice starch solutions increased with increasing gelatinization temperature, but waxy rice starch solutions remained constant, and in alkaline aqueous solutions both of them showed increasing K values. The value of K increased exponentially with an increase in concentration. The effect of the temperature on the viscosity of the solutions followed Arrhenius' type equation, and the activation energies were in the range of 3.675-3.775 kcal/g-mol that were near to that of pure water. The changes of reduced viscosity with concentration were followed Huggin's equation and the values of intrinsic viscosity and interaction coefficient were 0.78-1.59 dl/g and 0.67-2.75, respectively.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.2
• /
• pp.75-81
• /
• 2010

Feeling of shooting is one of the most important features of shooting games. Game developers have tried to improve feeling of shooting by using various techniques, such as visual/sound effects, rumble effects, animations, and camera techniques. In this paper, we introduce the results of the empirical analysis of the several techniques in a 2D shooting game. We carried out two experiments in which levels of feeling of shooting were measured in a simple 2D shooting game. The first experiment was configured with 16 combinations of the four techniques (visual, animation, sound, and rumble effects) applied to a shooting object (a cannon), and the second was configured with 16 combinations of the two techniques (visual and sound effects) applied to both or either side of a shooting object and exploding objects (enemy ships). The analysis results of the experiments showed that all of each techniques were statistically significant factors. We could also found that sound effects and rumble effects are more effective than visual effects and animations and that exploding objects are more important that a shooting object.

• Journal of the Korean Geophysical Society
• /
• v.10 no.1
• /
• pp.37-44
• /
• 2007

Nowadays, Global Navigation Satellite System(GNSS) which is the new concept of positioning system has been developed because of satisfaction human's intelligent desire and rapid science development. GNSS which is represented by GPS provides 3-Dimension positioning information not expensively in whenever, wherever. The industry of positioning information has extending civil market widely as well as military market. So GNSS is running the role of society infra structure including car and airborne navigation, civil engineering, GIS resource, telematics and LBS, and so on. As USA removes the SA(Selective Availability), GPS has monopolizing the market and other countries have been depended on GPS, absolutely. In this paper, the author developed the software for analysis of influence using next generation, Galileo system. The local analysis was performed according to positioning mode. And GPS/Galileo combined system can implement positioning in the worst mask environment like urban cannon.

• Conservation Science in Museum
• /
• v.7
• /
• pp.25-31
• /
• 2006

We performed the conservation treatment for Bigyeokchinjeonnoe (A kind of time bomb in the Joseon Dynasty) excavated from Hwawangsanseong Fortress in Changnyeong-gun, Gyeongsangnam-do Province. Part of the Bigyeokchinjeonnoe has been lost; we did not restore the lost part so that one can observe the inside through it. The results of X-ray investigation and C. T (Computed Tomography) scan proved the generation of many blowholes around the molding line during the casting process; a hole in the casting mold to maintain inner mold during casting was identified on the surface and traces of fortifying this part with iron plate were also identified. The main ingredients of the blue corrosion on the surface were identified as O, Fe, P, Si and Al by SEM/EDS analysis. The result of XRD analysis identified the blue corrosion as vivianite [Fe₃(PO₄)₂·8H₂O]. The metal structure clarified its material was gray cast iron.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.236-241
• /
• 2011

The position effect of the solid propellant in the combustion chamber on the decrease of the differential pressure has been investigated using the IBcode. Generally the metallic cartridge or CCC (combustible cartridge case) as the propellant for the cannon has been loaded. The position of the propellant(cartridge) is, therefore, a major factor for the interior ballistics in case the combustion chamber is larger than the cartridge. In this study, three cases of the existence of empty space in the chamber has been considered. As results, the case of the propellant located in the region near the base and breech has shown that the negative differential pressure and the difference between the breech pressure and the base pressure are much higher than those of the case of the propellant located in the center of the chamber. The case of the propellant in the center of the chamber is, therefore, more profitable to improve the performance of the interior ballistics.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.4
• /
• pp.39-45
• /
• 2010

Thick-walled cylinders, such as a cannon or nuclear reactor, are autofrettaged to induce advantageous residual stresses into pressure vessels and to increase operating pressure and the fatigue lifetimes. As the autofrettage level increases, the magnitude of compressive residual stress at the bore also increases. The purpose of the present paper is to predict the accurate residual stress of SCM440 high strength steel using the Kendall model which was adopted by ASME Code. Hydraulic pressure process was applied in the inner part and thick-walled cylinders were autofrettaged up to 30% overstrain levels. Electro polishing on the surface of autofrettage specimen was performed to get more accurate residual stress. Residual stresses were measured by X-ray diffraction method. The autofrettage surface which was plastically deformed analyzed using a scanning electron microscope(SEM). Although there were some differences in measured residual stress and numerical results, it has a tendency to agree comparatively with each other.