• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.968-969
• /
• 2015

This paper proposes a novel analysis method for calculating inverter DC bus capacitance and line reactor parameters. In the realization process, DC bus capacitance parameter, and ripple current, life of DC bus capacitor, interaction between DC bus capacitance can be calculated by using Newton-Raphson procedure. The design scheme of DC bus capacitor and line reactor, specific parameters such as capacitance, loss, ripple current, central average temperature, life, ripple current, loss, size, central temperature of the reactor were given. Simulation results show that this scheme can accurately calculate the DC bus capacitance and line reactor parameters. Compared with calculation result of references, cost and volume are half. The indicators meet the demand of practical engineering. It had affirmed precision of the analytical method and verified correctness and feasibility of this method.

• 한국자동차공학회논문집
• /
• 제21권1호
• /
• pp.128-136
• /
• 2013

This study presents the development of Gateway Control Module using SAE J1939 protocol for the commercial vehicles. Presently, the load rate of CAN bus is increased by the single network composition and addition of new ECUs for development of intelligent vehicles. Because the embedded system of the integrated network control function has the errors of the CAN bus caused by the increase of ECU, it is needed for development of commercial vehicles. Also, this study presents the development of smart functions that can diagnosis CAN bus errors, fault diagnosis of ECU and basic function that arbitrates CAN bus between ECUs of commercial vehicle. GCM was designed for 4channel separation about Gateway function as solution of load rate decrease and smart functions. HILS(Hardware in the loop simulation)system that can achieve simulation about CAN Messages of all systems on vehicle was applied to evaluate performance and verification of all functions and performance. The load rate on CAN bus was decreased at using functions what was delivery, block and process of GCM. Through this, it was enabled to organize systematic architecture for gateway.

• 한국도로학회논문집
• /
• 제15권3호
• /
• pp.159-167
• /
• 2013

PURPOSES: The purpose of this study is to develop an effectiveness analysis method of exclusive median bus lanes, which is necessary in order to improve operation efficiency of exclusive median bus lanes. METHODS : The operation characteristics of "signalized intersection including exclusive median bus lanes" and "normal signalized intersection" were investigated and the existing capacity analysis method was also reviewed to analyze the effectiveness of exclusive median bus lanes. Delay reduction of passengers using exclusive median bus lanes which can be considered as the benefit of exclusive median bus lanes and the number of people in buses were included in the proposed effectiveness analysis method. RESULTS : It was found that the proposed method expresses properly the effectiveness of exclusive median bus lanes through performing sensitivity analysis and analyzing with the real data of the number of people in buses and passenger cars. It was also found that the proposed method demonstrates the effectiveness that measure of effectiveness of signalized intersections is changed to "sec/person". CONCLUSIONS : It was concluded that the method is a proper effectiveness analysis method because it can reflect the benefit of passengers in buses.

• 전기학회논문지
• /
• 제60권11호
• /
• pp.2007-2016
• /
• 2011

In this paper, a new algorithm for alleviating overloads in power networks by the use of line power tracing and sensitivity is proposed to perform line switching and bus separation effectively. Also, a new bus separation index based on line power tracing is presented to find the bus to be separated for relieving overloads effectively. By applying the sensitivity of the line flow with respect to the change of the line impedance, both switching-on and switching-off of the lines for alleviating overloads in power networks are performed systematically at once. The number of the considered cases for line switching and bus separation can be greatly reduced and the best combination of line switching and bus separation can be acquired efficiently by the use of the sensitivity and the bus separation index. In order to show the effects of this algorithm, it is applied to a small scale power system of IEEE 39-bus system and practical power systems of KEPCO.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 학술대회 논문집
• /
• pp.251-253
• /
• 2004

Though the reference angle has been specified conventionally on the slack bus, it can be specified on my bus in the system without changing power flow solutions. This paper describes that the loss sensitivity of the salk bus can be obtained through an angle reference transposition. A concept of two reference buses, consisting of "power slack bus"

• 대한전자공학회논문지SD
• /
• 제47권1호
• /
• pp.94-101
• /
• 2010

최근 여러 개의 프로세서 및 메모리를 한 개의 칩에 구현하여 다양한 알고리즘을 구현하는 Multi-Processor System-on-Chip (MPSoC) 설계가 가능해지면서, 프로세서 간 interconnection을 최적화 하는 문제가 중요해졌다. Application에 따라서 최적 interconnection이 다르기 때문에, 체계적으로 다양한 사양에 적합한 interconnection 구조를 설계하는 방법이 필요하다. 본 논문에서는 프로세서가 4~16개 정도인 MPSoC application에서는 버스 구조가 적절한 점에 주목하여, 간단한 arbitration이 특징인 Single Arbitration Multiple Bus Accesses (SAMBA) 형 버스 구조를 이용하여, 다양한 application에 대한 성능 제약 조건을 만족하는 저비용 버스 구조를 찾는 새로운 방법을 제안하였다. 다양한 Application을 실험에 이용하여, 제안한 방법으로 성능 제약 조건 내에서 저비용 버스 구조를 찾았다. 같은 성능으로 최적화 전의 구조에 비해서 버스 분할에 필요한 로직 사용이 경우에 따라 약 50% 이상 감소한다. 또한 다양한 성능 조건에 대한 저비용 버스 구조를 찾을 수 있었다.

• 대한전기학회논문지
• /
• 제32권12호
• /
• pp.435-440
• /
• 1983

The methods of forming the bus impedance matrix, which is mainly employed in fault analysis of power system, can be generally classified in catagories, (1) the one being the inverse matrix of bus admittance matrix, and (2) the other the bus impedance matrix succesive formation method by particular algorithms. The former method is theouetically elegant, but the formation and inverse of complex bus admittance matrix for large power system requires too much amounts of computer memory space and computing time. The latter method also requires too much memory space. Therefore, in this paper, an algorithm and computer program is introduced for the formation of a sparse bus impedance matrix which generates only the matching terms of the admittance matrix. So, this method can reduce the computer memory and computing time, and can be applied to fault analysis of large power system by small digital computer.

• 전자공학회논문지C
• /
• 제35C권1호
• /
• pp.34-41
• /
• 1998

In this paper, I designed a P1394 serial bus chip as new bus interface architecture which can transmit the multimedia data at the rate of 400 Mbps and guarantee necessary bandwidth. because multimedia data become meaningless data after appropriate time, it is necessary to transfer multimedia data in real time, P1394 serial bus chip designed in this paper support isochronous transfer mode to solve this problem. Also, designed P1394 serial bus chip can transfer high quality video data or high quality audio data because it support the speed of 400 Mbps. While user must set device ID manually in previous interface such as SCSI, device ID is automatically determined if user connect each node with designed P1394 serial bus cable and power on. To design this chip, I verified the behavioral of the entrire system and synthesized layout. Also, I did layout the analog blocks and blocks which must be optimized in full custom.

• 한국컴퓨터정보학회논문지
• /
• 제24권5호
• /
• pp.41-47
• /
• 2019

A BIS(Bus Information System) collects, processes and analyzes information such as real-time location and operation status during bus operation. And It is a system that provides valid information to citizens, drivers, traffic centers and bus companies. Transport information system sent by an each bus is collected through GPS(Global Positioning System), DSRC(Dedicated Short Range Communications), Beacon and passed to transport information center. BIS data by collected is handled and analyzed. Next, it is transmitted to citizen, drivers and bus companies in real time. The result of 5 times simulation satisfied the test criteria(error range ${\pm}10m$) with an average error range of 3.306m, and the reliability is increased. In this paper, we propose a improved location transfer component that can provide users to quicker and more accurate location information than existing BIS using GPS of smart phone. It can be seen that reliability is improved by securing improved bus position data.

• 한국항행학회논문지
• /
• 제16권6호
• /
• pp.1024-1031
• /
• 2012

과거 주로 군사용 항공표적 및 정찰용으로 사용되어 왔던 무인항공기 개발 분야에도 최신 IT기술의 도입과 기술이 진화함에 따라 군사정찰 뿐만 아니라 민간 분야에까지 그 활용범위를 넓혀가고 있다. 향후 세계적으로 무인항공기 시장에서 주도적인 성장이 예상되는 민수 저가형 무인항공기는 최근 다양한 분야로 확대적용이 가속화 되고 있다. 그러나 현행 무인기 연구는 LINK 및 데이터 버스의 경우 군사용, 고가 위주의 연구가 주로 진행 되고 있어 가격이 주요 결정요인으로 작용하는 민수용 무인기 시스템으로는 구성하기에는 적합하지 않다. 본 논문에서는 무인항공기에 있어 정보전송체계에서 중요한 부분인 데이터 버스를 중심으로, 자동차 분야에서 안정성이 입증된 산업용 버스인 CAN 버스와 항공분야에서 사용되는 MIL-STD-1553B를 동일조건의 Simulation을 통해서 비교 분석을 하였다. 분석 결과 CAN 버스는 별도의 커플러 장비가 필요 없이, 통상적인 CAN 구성 체계만으로도 MIL-STD-1553B와 동일한 정보 전송율이 가능함이 확인 되었다. 이에 1553B 보다 비용면에서도 저렴하며 구성 체계 및 무게를 최적화 시킬 수 있어 저가형 무인기 내부 데이터 버스로 적합함을 확인 하였다.