• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.1
• /
• pp.150-157
• /
• 1997

Uniform weld pool shape is important in determining the weld quality. And weld pool width is one of the most dominant factors of the seld pool shape. In order to control the weld pool width, the fuzzy logic controller, which is well adapted to the complicated nonlinear systems such as welding, was used in this study. The weld pool image was obtained through CCD camera, and the weld pool width was calculated by processing the image. Uaing the calculated width, welding speed, as a control input, was inferred by the fuzzy logic controller. An uniform weld pool width can be successfully obtained regardless of the disturbances in the system.

• Nuclear Engineering and Technology
• /
• v.52 no.8
• /
• pp.1669-1676
• /
• 2020

The IAEA held the IAEA Robotics Challenge 2017 (IRC2017) to protect workers during inspections of spent nuclear fuel and to improve work efficiency and accuracy rates. To this end, we developed an unmanned surface vehicle (USV) system called the spent fuel check vehicle (SCV). The SCV extracts and tracks the target through image processing, and it is necessary to find suitable parameters for the SNF storage environment in advance. This preliminary work takes time. It is also difficult to prepare the environment in which the work will proceed. In addition, if the preliminary work does not proceed as planned, the system will not move at the proper speed and will become unstable, with yawing and overshoot. To solve this problem, we developed a controller with a camera that can extract the depth at which the target is stored and allow distance-adaptive control. This controller is able to attenuate system instability factors such as yawing and overshoot better than existing controllers by continuously changing system operation parameters according to the depth. In addition, the time required for preliminary work during inspections can be shortened.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.11 no.7
• /
• pp.603-610
• /
• 2001

Industrial processes are normally operated by skilled humans who have the cumulative and logical information about the system. Fuzzy control has been investigated for many application. Intelligent control approaches based on fuzzy logic have a chance to include human thinking. This paper represents modeling approach based upon operators knowledge without mathematical model of the system and optimize the controller. The experimented system is constructed for sending a ball to the goal position using wind of two DC motors in the predefined path. A vision camera to mimic human eyes detects the ball position. The system used in this experiment could be hardly modeled by mathematical methods and ould not be easily controlled by conventional manners. The controller is designed based on the input-output data and experimental knowledge obtained by trials, and optimized under the predefined performance criterion. And this paper shows the data adaptation for changeable operating condition. When the system is driven in the abnormal condition with unconsidered noise, the new optimal operating parameters could be defined by adjusting membership functions. Thus, this technique could be applied in industrial fields.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.379-383
• /
• 1995

In this paper, vision inspection module for dimensional measurement has been developed. For high accuracy of CMM, camera calibration and edge detection with subpixel accuracy have been implemented. In measurement process, the position of vision probe can be recognized in PC by serial communication with CMM controller. The developed vision inspection module can be widely applied to the practical measurement process.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.160.1-160
• /
• 2001

In this study, control technique of two types of automatic snowplow was experimentally investigated. One is a remote-controlled snowplow used for removing snow around houses, and the other is an autonomous snowplow for use in wide, open spaces such as a parking lot of a large-scale retail store. A commercially available snowplow was modified to enable remote control by the use of a personal handy-phone system. The autonomous controller utilizes a vision sensor that consists of a CCD video camera and a computer for image processing. In addition, design of a practical landmark was examined.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.180.4-180
• /
• 2001

This paper describes a vision-based line-tracking system for AGV and steering control scheme. For detect the guideline quickly and exactly, We use four line-points which complement and predict each other. This low-cost line-tracking system is efficiently using PC-based real-time vision processing, Steering control is studied through an steering controller with guide-line angle and line-point error. This method is tested via a typical AGV with a single camera in laboratory environment.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2009.04a
• /
• pp.325-326
• /
• 2009

다각촬영카메라를 제어하고 GPS/INS와 동기화하기 위해서 다각촬영 카메라 제어 장비(MLCC)를 개발하였다. 이는 5대의 카메라에 촬영신호를 보내고 촬영시각을 GPS/INS와 동기화 하여 정확한 촬영시각을 기록하기 위한 장비이다. 개발 결과를 검증하기 위하여 Applanix사의 POS 시스템과 Leica-Geosystem의 IPAS20을 병렬로 연결하여 그 결과를 비교하였다. 비교 결과 다각촬영 카메라를 제어하기에 충분한 정밀도를 보여 주었으며, 차기년도 경량화를 진행하고자 한다.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.665-666
• /
• 2006

By adding user interface to the usual router, an improved functional router is implemented In this paper, we design the DWT(Discrete Wavelet Transform) for JPEG2000 CODEC. The DWT is developed based on ARM-based Excalibur, and the system contains DMA processor, Slave interface, DWT filter, Controller. The architecture of the prposed DWT is verified using Altera QuartusII.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1771-1772
• /
• 2007

The purpose of this project is to develop the visual servoing system with 5d.o.f robot manipulator. For this, we developed robot manipulator by using 5 serial RC motors and the visual system is also developed by using low cost USB CCD camera. RISC MPU ATMEGA128 is main controller MPU for the robot manipulator. To control the manipulator Kinematics was analyzed and GUI, API for vision system also were developed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.10
• /
• pp.1897-1904
• /
• 2006

Home service robot must recognize and build map for indoor and components of the house such as furniture and chair etc. The previous researcher has developed a indoor map building system by using CCD camera and ultra sonic sensor. %no stems have some problem in such a way that (1) a distun resolution can be changed according to the number of pixel when we use a CCD camera system, (2) a measured distance can be decreased when it transmitted to the rubber because of being absorbed the sound energy. This paper represents an intelligent sensor controller of module has been developed by using optic PSD(Position Sensitive Detector) sensor any at a low price. To deduce the switching noise from beam power module and diffused reflection noise, we proposed a heuristic soft filter. The performance of the developed system was compared with ultra sonic sensor system by detecting the indoor wall environment. Some experiments were illustrated for the validity of the developed system.