• Journal of the Korean Society of Groundwater Environment
• /
• v.5 no.2
• /
• pp.66-79
• /
• 1998

This study purposes to elucidate the characteristics of local water quality and the evolutional process of the spring water have been studied with the samples from 55 selected springs, from the coast region to the Baegrogdam, a caldera lake of Halla mountain in Cheju Island. Results of hydrochemical analyses in the 55 spring water show that Gwaneumsa is pollued with high hydrogen concentration, and spring waters from Yusuarmchun, Jangsumul, Dukjisemmul, Sinch'onk'nmul, Youngchunsa, Woonyangchun, Harwontongmul, Dongheamul, Seakdalsengsu, Andukkyekok, Dotimul, Kinmul, Harkangmul and Jungkeummul are polluted by the pollution sources from the surface surrounding ground. Spring waters of Samyang3suwon, Meungbusa, Sernurungmul, Tosanmul, Jungkeummul, Kwakgimul, Aewolharmul, Konemul and Nokgomul are also polluted from the sea water intrusion. The electrical conductivity, pH and the concentration of nitrate nitrogen and bicarbonate increase when the precipitation increases, but the concentration of sodium, chloride and sulphate decrease when the precipitation increases. The concentrations of potassium, magnessium and calcium are nearly independent of the precipitaion. Quality characteristics of spring water show complicated group of spring water through piper's trilinear diagram. The high mountain region consists of groups of sodium or potassium type and bicarbonate type; the middle mountain region consists of groups of sodium or potassium type and no dominant type; the low mountain consists of groups of no dominant type and sulfate or nitrate type; the coast region consists of groups of sodium or potassium type and chloride type or no dominant type. These characteristics indicate that the spring waters are changed from bicarbonate type in the high and middle mountain regions into non-bicarbonate type in the coastal region, as the precipitated waters flow downslope.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.1
• /
• pp.78-88
• /
• 1985

Nitrogen fertilizer effectiveness on rice production was studied to evaluate the different forms and sources. Seven kind of nitrogen fertilizers were applied in two levels, 15 and 30 kg per 10a on Jinjubyeo (Japonica type) in silt loam paddy soil of pot cultivation. The results were summerized as follows; 1. pH in soils was decreased with enhancement of ammonium sulfate application in $NH_4-N$, but it was increased with times after nitric-acid application and PH change in soil was not remarkable when $NO_3-N$ with accessory component was applied. 2. $NH_4-N$ contents in soil were the lowest at 2 weeks after application in N 15kg/10a regardless of different sources of nitrogen fertilizer. $NO_3-N$, in N 30kg/10a, was decreased continuously until 4 weeks, while $NH_4-N$, Urea-N were at minimum during 2-3 weeks. 3. Growth of culm length and straw weight applied with AN (Ammonium Nitrate), AS (Ammonium Sulfate) and urea were superior to the form of nitrate. While NA (Nitric Acid), PN (Potassium Nitrate) and CN (Calcium Nitrate) plot of the $NO_3-N$ was the dominant fertilizers for root elongation. 4. Brown rice yields were increased dominantly by $NH_4-N$ application such as AS or AP than $NO_3-N$ pot. But the yields in case of $NO_3-N$ application CN, PN and NA were decreased. 5. N, P, Mg and Mn content of straw ranked the effectiveness of nitrogen forms as $NH_4-N$, Urea-N and $NH_4-N+NO_3-N$, while K, Ca and $SiO_2$ content of straw in $NO_3-N$ fertilizer plot were high while N, P, Mg, Mn, Fe and Mg were low. 6. Increament of nitrogen absorption in straw was stimulated by enhancement of phosphorous absorption and the growth and yield of rice plant were increased. Absorption of N, P, Ca and Mg was decreased by CN application. Absorption of N, P and Mg also was decreased by $NO_3-N$ application and N, P, Mg or Ca content were seemed to simulated the growth and yield of rice plant. 7. $SiO_2$, Zn and Fe contents of the root at harvest stage were higher than those of the straw. N, P, Mg, Mn, Zn and Fe contents were high in $NH_4-N$ and Urea treatment. While K, ca and $SiO_2$ contents, however, were high in $NO_3-N$ treatment.

• Journal of the Korean Ceramic Society
• /
• v.55 no.6
• /
• pp.597-607
• /
• 2018

In this study, a wet chemical method was used to synthesize nanostructured hydroxyapatite for biomedical applications. Diammonium hydrogen phosphate and calcium nitrate 4-hydrate were used as starting materials with a sodium hydroxide solution as an agent for pH adjustment. Scanning electron microscopy, transmission electron microscopy, Fourier-transform infrared spectroscopy, differential thermal analysis, thermal gravimetric analysis, atomic absorption spectroscopy, and ethylenediaminetetraacetic acid (EDTA) titration analysis were used to characterize the synthesized powders. Having been uniaxially pressed, the powders formed a disk-like shape. The sinterability and electrical properties of the samples were examined, and the three-point bending test allowed for the measurement of their mechanical properties. Sedimentation analysis was used to analyze the slurry ability of hydroxyapatite. As in-vitro biological properties of the samples, biocompatibility and cytotoxicity were assessed using osteoblast-like cells and the L929 cell line, respectively. Solubility was assessed by employing a simulated body fluid.

• International Journal of Concrete Structures and Materials
• /
• v.8 no.1
• /
• pp.15-26
• /
• 2014

In order to study the capacities of a new occurrence of Brazilian clay samples as partial replacements of cement, a bentonite sample was selected for utilization in the natural and modified forms for present study. The natural bentonite (BBT) was modified by anchorament of 3-aminopropyltrietoxisilane ($BBT_{APS}$) and 3,2-aminoethylaminopropyltrimetoxisilane (BBTAEAPS) in the surface of component minerals of bentonite sample. The original and organo-bentonite samples were characterized by elemental analysis, scanning electron microscopic and textural analyses. The values of micropore area were varying from $7.2m^2g^{-1}$ for the BBT to $12.3m^2g^{-1}$ for the $BBT_{AEAPS}$. The bentonite samples were characterized by the main variable proportion of bentonite in the natural and intercalated forms (2, 5, 10, 15, 20, 25, 30, and 35 % by weight of cement) in the replacement mode whiles the amount of cementations material. The workability, density of fresh concrete, and absorption of water decreased as the substitution of ordinary Portland cement by perceptual of natural and modified bentonite increased. The results reveal that workability decreased with decrease of the amount of natural bentonite in the concrete, same behavior is observed for bentonite functionalized, varying from 49 to 28 mm. The energetic influence of the interaction of calcium nitrate in the structure of blends was determined through the calorimetric titration procedure.

• Computers and Concrete
• /
• v.26 no.3
• /
• pp.257-273
• /
• 2020

Concrete bond strength with steel re-bars depends on multiple factors including concrete-steel interface and mechanical properties of concrete. However, the hydration development of cementitious paste, and in turn the mechanical properties of concrete, are negatively affected by cold weather. This study aimed at exploring the concrete-steel bonding behavior in concrete cast and cured under freezing temperatures. Three concrete mixtures were cast and cured at -10 and -20℃. The mixtures were protected using conventional insulation blankets and a hybrid system consisting of insulation blankets and phase change materials. The mixtures comprised General Use cement, fly ash (20%), nano-silica (6%) and calcium nitrate-nitrite as a cold weather admixture system. The mixtures were tested in terms of internal temperature, compressive, tensile strengths, and modulus of elasticity. In addition, the bond strength between concrete and steel re-bars were evaluated by a pull-out test, while the quality of the interface between concrete and steel was assessed by thermal and microscopy studies. In addition, the internal heat evolution and force-slip relationship were modeled based on energy conservation and stress-strain relationships, respectively using three-dimensional (3D) finite-element software. The results showed the reliability of the proposed models to accurately predict concrete heat evolution as well as bond strength relative to experimental data. The hybrid protection system and nano-modified concrete mixtures produced good quality concrete-steel interface with adequate bond strength, without need for heating operations before casting and during curing under freezing temperatures down to -20℃.

• Microbiology and Biotechnology Letters
• /
• v.10 no.1
• /
• pp.45-52
• /
• 1982

A fungus with the highest protopectinase productivity was selected among 205 strains isolated from the soil and identified as a Verticillium sp. The Verticillium sp. was cultivated on wheat bran and the crude extruct of its culture medium showed the highest protopectinase activity on the following conditions: 3 days of cultivation time, 27$^{\circ}C$ of cultivation temperature, 1.2 $m\ell$/g wheat bran of water content, and reinforcement of ammonium nitrate and calcium chloride at the concentration of 0.5 and 0.02%, respectively. The optimum conditions for pectin production from Citrus peel pulp by the protopectinase were consequently obtained as follows: 20$m\ell$/g of liquid volume-to-pulp weight ratio, 4$0^{\circ}C$ of reaction temperature, and 4 of reaction pH. The higher the enzyme concentration, the better the yield of pectin and the shorter the reaction time. Total 45.6mg of pectin/g peel was produced by 1 hour reaction at the enzyme concentration of 10.5 units/$m\ell$. Molecular weight of the pectin produced by the enzyme was estimated to be about 62,000 by Smit and Bryant's method.

• Journal of Biosystems Engineering
• /
• v.32 no.5
• /
• pp.348-353
• /
• 2007

A solid state ion sensor module has been developed and evaluated for hydroponic nutrients analysis. The sensor module consisted of five ion-selective electrodes (ISE) fabricated by screen-printing technology. The electrochemical responses of ion sensors for nitrate, ammonium, potassium, calcium, and pH were measured with specially designed 7-channel low voltage signal transducers. The analytical characteristics of the sensors were comparable with those of conventional ISE sensors. The solid state ion sensors exhibit linear relationships over five concentration decades. Detection limit of the sensors were $5.6{\times}10^{-5}{\sim}1.6{\times}10^{-7}M$ depends on ions. Performance test results showed that relative errors of measured ion concentrations were less than 5% for $NO_3{^-},\;K^+,\;Ca^{2+}$ ion, and pH. The concentration of $NO_3{^-},\;NH_4{^+},\;K^+,\;Ca^{2+}$, and pH ion in standard solution and nutrient solutions could be determined by direct potentiometric measurements without any conditioning before measurements.

• Korean Journal of Medicinal Crop Science
• /
• v.24 no.1
• /
• pp.27-30
• /
• 2016

Background : This text was conducted to evaluate the distribution, shape characteristics and habitat condition of Crypsinus hastatus in Buyeo Korea. Methods and Results : In Buyeo, Crypsinus hastatus was distributed at an altitude of 31.2 m, a slope of 82.5% and a distance from river water of 27.2 m. The leaf blade was oblong, 2.7 cm long, 1.2 cm wide with a petiole length of 2.3 cm. The total population comprised 2,100 individuals, with the highest proportion being individuals with a leaf blade of length 0.5 - 1 cm. The temperature and light intensity of the growth point were lower, but the humidity higher, than that of growth around. The chemical properties of the soil were as follows: pH 4.42, organic matter 77.99 g/kg, electrical conductivity 0.50 dS/m, nitrate nitrogen 20.50 mg/kg and available phosphate 165.7 mg/kg. Exchangeable cation content of potassium, magnesium, sodium and calcium was 0.35, 0.70, 0.09 and $2.04cmol^+/kg$, respectively. Conclusions : In Buyeo, Crypsinus hastatus was distributed in $5.3m^2$ area of Nakhwaam, Naeseongri and Jeongamri. However, the population of the medicinal resources seemed to decrease owing to the poor environmental conditions of the habitat.

• Journal of Environmental Health Sciences
• /
• v.29 no.3
• /
• pp.91-96
• /
• 2003

This study was intended as an investigation of characteristics of background site atmospheric respirable particulate matters(RPM), and fine particles(<2.5 ${\mu}{\textrm}{m}$). The particle size distributions during the phenomenon of Yellow Sand(YS) occurs from April, 2001. Atmospheric aerosol particulate matter was directly collected on the Jeju island between 1 to 30, April, 2001 using an eight-stage cascade impacter(particle size range: 0.43-11 ${\mu}{\textrm}{m}$), and cyclone separator(cut size: 2.5, 10 ${\mu}{\textrm}{m}$). The episode of YS observed in background monitoring site, Kosan and appeared 2 times at sampling period. The mass concentrations of fine and coarse particles for YS episode were 34.2 and 59.6 $\mu\textrm{g}$/㎥, respectively, which were significantly increased amounts compared to 13.3 and 13.0 $\mu\textrm{g}$/㎥ for NonYS(NYS). Most size distributions had two peaks, one at 0.43∼.65 ${\mu}{\textrm}{m}$ and the other at 3.3${\mu}{\textrm}{m}$4.7 ${\mu}{\textrm}{m}$. The result of analysis of water-soluble ion component indicated that sulfate was mainly ion component, but nitrate and calcium ion was significantly increased at the YS episode.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.3
• /
• pp.439-448
• /
• 2011

Oxalic acid is synthesized by a wide range of plants. A few of them are forage plants that can cause oxalate poisoning in ruminants under certain conditions. In this paper, the role of some agronomic, climatic and genetic factors in minimizing oxalate accumulation in forage plants has been discussed. Research indicates that the content of oxalate in forage can be controlled by fertilizer application. For example, nitrate application resulted in higher contents of soluble and insoluble oxalates than ammonium application. With an increased rate of potassium application, soluble oxalate content showed an increasing trend and insoluble oxalate content showed a decreasing trend. With an increased rate of calcium application, soluble oxalate content showed a decreasing trend and insoluble oxalate content showed a reverse trend. Other agronomic factors such as growing season, harvesting practices, plant maturity, plant species, plant variety and plant parts can also have a large effect on oxalate accumulation. However, the potential benefits of the above approaches for improving forage quality have not been fully exploited. In addition, there is still insufficient information to fully utilize means (e.g. plant nutrients, season and soil moisture) to minimize oxalate accumulation in forage plants. Therefore, more research is required for a better understanding of the interactions between oxalate and the above-mentioned factors in forage plants.