• 한국세라믹학회지
• /
• 제40권5호
• /
• pp.441-446
• /
• 2003

ZnO 미세 분말을 sol-gel법으로 제조하였다. Gel분말의 형상은 하소 열 처리 온도에 따라 판상, 침상,그리고 구형으로 변화하였고, $700^{\circ}C$ 이하 하소 온도에서는 온도에 따른 입자 성장 속도가 낮았지만, $700^{\circ}C$ 이상의 온도부터 급격한 입자 성장 속도를 나타내었다. 입자 사이즈가 커질수록 결정화 정도는 더 커졌고, gel분말의 유기 화합물들은 30$0^{\circ}C$ 이하 온도에서 휘발되었다. 열 처리 온도에 따른 ZnO 분말은 S자형(sigmoidal shape)의 전기전도성 거동을 보였고, gel분말의 열처리 온도가 감소할수록 일정한 전도성이 일정한 온도 구간이 좁게(narrow) 나타났다. 최적의 CO 기체 센싱 특성은 50$0^{\circ}C$의 하소 열처리한 시편에서 나타났고, 열처리 온도가 올라갈수록 센싱 특성은 감소하였다.

• 한국결정성장학회지
• /
• 제6권2호
• /
• pp.213-219
• /
• 1996

$300^{\circ}C$ 이상의 고온에서 동작하는 전통적인 $SnO_{2}$ 또는 ZnO와 같은 전통적인 세라믹 가스 센서보다 훨씬 낮은 온도에서 동작이 가능한 $Pt/MoO_{3}$ 가스 센서를 pellet 형으로 제작하였다. $Pt/MoO_{3}$ 가스 센서의 하고 온도(calcination temperature)에 따른 표면구조의 변화와 결정구조의 변화가 투과전자현미경(transmission electron microscopy)과 X-선 회절시험에 의하여 조사되었다. 투과전자현미경 사진으로부터 하소 온도가 증가할수록 시편에서 $PtCl_{x}$에서 Cl의 양이 줄어드는 것과 Pt위에 $MoO_{3}$의 얇은 막(overlayer)이 형성되어 있다는 것을 보여준다. 가스 흡착 시험 결과 표면구조의 변화에 따라서 시편의 수소 저장 능력이 변화함을 보여주었다. $50^{\circ}C$와 $150^{\circ}C$에서 수소가스 감지도를 측정한 결과 매우 우수한 결과를 보여 주었다.

• 한국전기전자재료학회논문지
• /
• 제33권6호
• /
• pp.483-489
• /
• 2020

BaTiO₃ powder was synthesized by a solid-state reaction using BaCO₃ and TiO₂. Different calcination temperatures (800℃, 850℃, 900℃, and 950℃) were set to investigate their effects on the properties of BaTiO₃ powder. The synthesized BaTiO₃ phase was confirmed to be a single phase by XRD, and the tetragonality (c/a) and crystallite size were calculated. Thereafter, each calcinated BaTiO₃ was sintered at five different sintering temperatures (1,100℃, 1,150℃, 1,200℃, 1,250℃, and 1,300℃), and the tetragonality, density, porosity, dielectric constant, and grain size were measured. As the calcination temperature increased, the tetragonality and crystallite size also increased, to 1.008 and 66 nm, respectively, at 950℃. Moreover, most pellets showed increased density, dielectric constant, and tetragonality as the sintering temperature increased up to 1,250℃; the same parameters slightly decreased at 1,300℃. It is noteworthy that the tetragonality of BaTiO₃ at 1,250℃ exhibits a very high c/a value of 1.0084. In addition, the grain size and dielectric constant measured near the Curie temperature increased as the sintering temperature increased.

• 한국재료학회지
• /
• 제2권5호
• /
• pp.320-329
• /
• 1992

2mol%의 이트리아로 안정화된 정방정상 지르코니아 분말을 80$0^{\circ}C$부터 150$0^{\circ}C$ 까지 온도별로 열처리하여 분말내 입자크기 및 입자간에 존재하는 구속력을 변화시킨 다음, 정방정상의 전이도 및 안정화효과가 무열상전이, 응력유기상전이, 등온상전이 에 미치는 영향을 고찰하였다. 그 결과 Y-TZP 분말내 정 방정상의 전이도는 고용체의 양이 일정할 경우 열처리온도의 변화에 따른 입자크기와 입자간에 존재하는 구속력의 크기에 의존하였는데 열처리온도가 증가함에 따라 전이도가 점차 증가하여 130$0^{\circ}C$로 열처리한 분말에서 최대값을 보였다. 그러나 130$0^{\circ}C$ 이상으로 열처리한 분말에서는 열처리온도가 증가함에 따라 구속효과의 증가에 따라 전이도가 정차로 감소하였다. 전이도가 큰 분말에서는 정방정상이 무열상전이, 응력유기상전이, 등온상전이를 쉽게 일으켜 단사정상으로 전이하였다.

• 한국환경과학회지
• /
• 제4권1호
• /
• pp.41-52
• /
• 1995

The effects of reaction temperature, SO2 and CO2 concentration in an air gas stream, particle sizes of limestone on the reactivity and capacity of SO2 removal have been determined in a thermogravimetric analyser(TGA). The apparent reaction order of sulfation reaction of pre-calcined lime(CaO) with respect to SO2 is found to be close to unity. The apparent activation energies are found to be 17,000 kcal/kmol for sulfation of pre-calcined lime and 19,500 kcal/kmol for direct sulfation of limestone(CaCO3). The initial sulfation reaction rate of pre-calcined lime increases with increasing temperature, whereas the sulfur capture capacity exhibits a maximum value at 90$0^{\circ}C$. In direct sulfation of limestone, sulfation reactivity and sulfur capature capacity of sorbent increase with increasing temperature and decreasing CO2 concentration in a gas bulk stream. The main pare of pre-calcined lime is shifted to the larger pore sizes and pore volume decreases with increasing sulfation time and temperature. The surface area of lime decreases with increasing calcination temperature under an air atmosphere, whereas is yearly constant under a CO2(5, 10%) atmosphere in a gas stream.

• Transactions on Electrical and Electronic Materials
• /
• 제15권6호
• /
• pp.305-308
• /
• 2014

Organosilyl-modified and star-shaped poly (${\varepsilon}$-caprolactone) (m-PCL) was prepared, and added to polymethylsilsesquioxane (PMSSQ), to make composites. The end groups of m-PCL are chemically similar to PMSSQ, and m-PCL mixed well with PMSSQ in the composite. Porous PMSSQ film was made by further calcination of the composite film at elevated temperature. m-PCL-templated PMSSQ and the as-prepared porous PMSSQ were structurally, optically, and thermally characterized in thin films. The chemical binding of m-PCL and PMSSQ effectively suppressed the phase separation of PMSSQ and m-PCL during the curing process. After calcination at elevated temperature, there remained many pores in the PMSSQ matrix. The refractive indices of the resulting porous PMSSQ thin films decreased with increase of the film porosities, depending on the initial m-PCL loadings.

• 한국분말재료학회지
• /
• 제16권3호
• /
• pp.167-172
• /
• 2009

This study has been carried out to investigate the non-isothermal behaviors and kinetic parameter of calcium carbonate by different thermal analysis methods. At the heating rate of $10^{\circ}C$/min, the onset calcination temperature, the peak and final temperatures of calcium carbonate were $612^{\circ}C$, $748^{\circ}C$, and $890^{\circ}C$ respectively. As the heating rate of the calcium carbonate increased from $5^{\circ}C$/min to $20^{\circ}C$/min, the peak temperature increased from $719^{\circ}C$ to $782^{\circ}C$. The activation energies of the calcium carbonate calculated by the methods of Kissinger and Freeman-Carroll were 40.15 kcal/mol and 43.47 kcal/mol, respectively.

• 한국응용과학기술학회지
• /
• 제26권4호
• /
• pp.473-482
• /
• 2009

Titanium dioxide particles are used as cosmetics, pigments, photocatalysts, adsorbents, catalytic supports, and sensors. The $TiO_2$ particles were prepared by the precipitation in TTIP/Solvent mixtures and calcined at different temperatures. The resulting materials were characterized by XRD and SEM testing techniques. The $TiO_2$ particles phase composition was determined by XRD ranging from amorphous to crystalline anatase and rutile largely proportional to the calcination temperature.

• 한국세라믹학회지
• /
• 제34권5호
• /
• pp.453-460
• /
• 1997

Sr-ferrite having magnetoplumbite structure is similar to Ba-ferrite in magnetic characteristics, but better magnetic characteristics for using motor application. To improve remanence magnetic flux density(Br) and coercive force(iHc), it is necessary that sintered ferrites must have high density and grain size less than 1 $\mu$m. By varying n values in SrO.nFe2O3 basic composition, calcination temperature, and BaO addition, Sr-ferrite powder and sintered specimen was prepared. The n values, calcination temperature, and BaO addition affected secondary phase formation, particle size, and particle shape. BaO addition enhanced Fe2O3 secondary phase and hexagonal shape particle. Fe2O3 phase reduced sintered density which greatly decreased Br.

• 한국세라믹학회지
• /
• 제26권1호
• /
• pp.109-115
• /
• 1989

The properties of the powders of ZrO2-MgO system prepared by co-precipitation method using ZrOCl2.8H2O and MgCl2.6H2O as starting materials were investigated after calcination from $600^{\circ}C$ to 120$0^{\circ}C$. The crystallization temperature of amorphous ZrO2 was increased as MgO contents increased. The crystallite size of ZrO2 was increased with increasing calcination temperature. The crystallite size of tetragonal ZrO2 calcined at 100$0^{\circ}C$ for 1hr wa about 45nm, and MgO contributed effectively to promoting stability of tetragonal Zirconia.