• 한국의류학회지
• /
• 제33권1호
• /
• pp.68-79
• /
• 2009

It is inevitable to have cutting line to get the 2D pattern from 3D body surface. In this paper the efficiency of curvature plot as a cutting line in the process of flattening 3D surface was investigated. As reference, basic clothing construction line was adopted to divide the 3D surface into small blocks to make the flattening process easy. Female dummy as well as human body were scanned and surface of the upper body was segmented using curvature plot and basic constructing line. 2D tight-fit pattern was developed using three software, the RapidForm 2004, 2C-AN and Yuka CAD. Gap between clothes and body, and the clothing pressure on the body was observed to determine the fit of the clothes. As results, clothes constructed with blocks divided by curvature plot displayed a similar level of tight fit as compared with those by basic construction line. It was found that curvature plot is effective method as a segmentation of the 3D surface even for the actual body which does not have any previous reference line. It is expected that application of curvature plot will be expanded in 3D apparel technology.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.489-494
• /
• 2008

전기 및 전자 분야의 기술발전으로 인하여 전자기파에 의한 환경영향은 더욱 높아지고 있으며 다양한 시스템의 조합으로 운용되는 전기철도 분야에도 이러한 전자기파에 의한 환경영향이 안전의 측면에서 중요하게 논의되고 있다. 객실의 자계는 인체의 유해성 및 실내장치의 동작성능에 영향을 줄 수 있는 자계 강도를 확인하기 위하여 측정한다. 극저주파의 측정은 교류 25 kV로 급전 받아 운행되는 전기철도차량에서 실시하였으며, 전기철도차량의 주요 전장품(Converter/Inverter Box, 주변압기, 견인전동기, SIV)이 있는 위치에서 측정하였다. 측정된 결과는 컴퓨터를 통하여 FFT를 실시하였으며, 측정결과가 국내의 권고기준에 적합한지 여부를 확인하였다. 본 논문은 교류전원으로 운행되는 전기철도차량을 대상으로 하여 극저주파 자계를 측정하였다. 측정 결과, 최대 RMS값의 경우 C/I는 약 3.4 ${\mu}T$, 주변압기는 8.2 ${\mu}T$, 견인전동기가 24 ${\mu}T$, 보조전원장치가 24 ${\mu}T$로 나왔으며, 주파수 분석에 의한 결과 또한 기준값 이하로 나왔다. 모두 정통부 및 국제 위원회 등에서 고시하는 제한치내에 있는 것을 확인할 수 있었다. 그러나 아직까지 극저주파에 대한 인체에 미치는 영향이 과학적으로 규명되어 있지 않고, 개인마다 또는 여러 다른 환경적 요인들로 인해 정확히 전자파의 영향이라고 분리하기가 불가능한 실정이다. 향후 연구되는 결과들을 바탕으로 하여 자계 측정 방법 및 분석에 대한 연구가 이루어져야 할 것이다.

• 한국결정학회지
• /
• 제11권3호
• /
• pp.162-166
• /
• 2000

KD₂PO₄ single crystals were grown from D₂O with reagent KH₂PO₄ and the crystal structure was determined by X-ray and neutron diffraction methods. The crystals are tetragonal at room temperature, I42d, with lattice parameters of a=7.4633(7), c=6.9785(5) Å and Z=4. Intensity data were collected on an Enraf-nonius CAD4 diffractometer with a graphite monochromated MoK/sub α/ radiation (λ=0.7107Å) and on the neutron four circle single crystal diffractometer with Ge(331) monochromated neutron beam (λ=0.997Å). The structure was refined by full-matrix least-square to final R and wR values of 0.030 and 0.072, respectively, for 204 observed reflections with I>2σ(I) by X-ray diffraction and to final R=0.041 and wR=0.096 for 144 observed relfecdtions by neutron diffraction. The O…O distance of 2.516(4)Å obtained by X-ray diffraction is the same as that of 2.515(4)Å by neutron diffraction. On the other hand, the O-D/H distance of 0.84(4)Å by X-ray diffraction is considerably shorter than 1.029(7) Åby neutron diffraction. Hydrogen and deuterium can be readily distinguished by neutrons. In this crystal 66% of H-positions were substituted by D and the rest 34% occupied by H. The phase transition temperature of DKDP obtained with deuteration levels is f193K. This value agrees fairly well with the result of DSC measurement. The nuclear density distribution by neutron diffraction provides an observation of the disordered state of D/H in KD₂PO₄ at room temperature.

• International Journal of Oral Biology
• /
• 제36권3호
• /
• pp.155-162
• /
• 2011

Eugenol (4-allyl-2-methoxyphenol) is a naturally occurring phenolic compound that is widely used in dentistry as a component of zinc oxide eugenol cement that is commonly applied to the mouth environment. Cisplatin is one of the most potent known anticancer agents and shows significant clinical activity against a variety of solid tumors. This study was undertaken to investigate the synergistic apoptotic effects of co-treatments with eugenol and cisplatin on human melanoma (G361) cells. To investigate whether this co-treatment efficiently reduces the viability of G361 cells compared with each single treatment, an MTT assay was conducted. The induction and augmentation of apoptosis were confirmed by DNA electrophoresis, Hoechst staining and an analysis of DNA hypoploidy. Western blot analysis and immunofluorescent staining were also performed to evaluate the expression levels and the translocation of apoptosis-related proteins following this co-treatment. Furthermore, proteasome activity and mitochondrial membrane potential (MMP) changes were also assayed. The results indicated that a co-treatment with eugenol and cisplatin induced multiple pathways and processes associated with an apoptotic response in G361 cells including nuclear condensation, DNA fragmentation, a reduction in MMP and proteasome activity, the increase and decrease of Bax and Bcl-2, a decreased DNA content, the release of cytochrome c into the cytosol, the translocation of AIF and DFF40 (CAD) into the nucleus, and the activation of caspase-9, caspase-7, caspase-3, PARP and DFF45 (ICAD). In contrast, separate treatments of 300 ${\mu}M$ eugenol or 3 ${\mu}M$ cisplatin for 24 h did not induce apoptosis. Our present data thus suggest that a combination therapy of eugenol and cisplatin is a potential treatment strategy for human melanoma.

• International Journal of Oral Biology
• /
• 제38권3호
• /
• pp.101-110
• /
• 2013

We investigated the synergistic apoptotic effects of co-treatments with Chios gum mastic (CGM) and eugenol on G361 human melanoma cells. An MTT assay was conducted to investigate whether this co-treatment efficiently reduces the viability of G361 cells compared with each single treatment. The induction and augmentation of apoptosis were confirmed by DNA electrophoresis, Hoechst staining, and analyses of DNA hypoploidy. Western blot analysis and immunofluorescent staining were also performed to evaluate expression and translocation of apoptosis-related proteins following CGM and eugenol co-treatment. Proteasome activity and mitochondrial membrane potential (MMP) changes were also assayed.The results indicated that the co-treatment of CGM and eugenol induces multiple pathways and processes associated with an apoptotic response in G361 cells. These include nuclear condensation, DNA fragmentation, a reduction in MMP and proteasome activity, an increase of Bax and decrease of Bcl-2, a decreased DNA content, cytochrome c release into the cytosol, the translocation of AIF and DFF40 (CAD) into the nucleus, and the activation of caspase-9, caspase-7, caspase-3, PARP and DFF45 (ICAD). In contrast, separate treatments of $40{\mu}g/ml$ CGM or $300{\mu}M$ eugenol for 24 hours did not induce apoptosis. Our present data thus suggest that a combination therapy of CGM and eugenol is a potential treatment strategy for human melanoma.

• The Journal of Advanced Prosthodontics
• /
• 제7권6호
• /
• pp.454-459
• /
• 2015

PURPOSE. To determine whether the fracture strengths and failure types differed between metal and zirconia frameworks veneered with pressable or layering ceramics. MATERIALS AND METHODS. A phantom molar tooth was prepared and duplicated in 40 cobalt-chromium abutments. Twenty metal (IPS d.SIGN 15, Ivoclar, Vivadent, Schaan, Liechtenstein) and 20 zirconia (IPS e.max ZirCAD, Ivoclar) frameworks were fabricated on the abutments. Each framework group was randomly divided into 2 subgroups according to the veneering material: pressable and layering ceramics (n=10). Forty molar crowns were fabricated, cemented onto the corresponding abutments and then thermocycled ($5-55^{\circ}C$, 10,000 cycles). A load was applied in a universal testing machine until a fracture occurred on the crowns. In addition, failure types were examined using a stereomicroscope. Fracture load data were analyzed using one-way ANOVA and Tukey HSD post-hoc tests at a significance level of 0.05. RESULTS. The highest strength value was seen in metal-pressable (MP) group, whereas zirconia-pressable (ZP) group exhibited the lowest one. Moreover, group MP showed significantly higher fracture loads than group ZP (P=.015) and zirconia-layering (ZL) (P=.038) group. No significant difference in fracture strength was detected between groups MP and ML, and groups ZP and ZL (P>.05). Predominant fracture types were cohesive for metal groups and adhesive for zirconia groups. CONCLUSION. Fracture strength of a restoration with a metal or a zirconia framework was independent of the veneering techniques. However, the pressing technique over metal frameworks resisted significantly higher fracture loads than zirconia frameworks.

• Biomaterials and Biomechanics in Bioengineering
• /
• 제3권2호
• /
• pp.115-127
• /
• 2016

Shoulder pain, injury and discomfort are public health and economic issues world-wide. The function of these joints and the stresses developed during their movement is a major concern to the orthopedic surgeon to study precisely the injury mechanisms and thereby analyze the post-operative progress of the injury. Shoulder is one of the most critical joints in the human anatomy with maximum degrees of freedom. It mainly consists of the clavicle, scapula and humerus; the articulations linking them; and the muscles that move them. In order to understand the behavior of individual muscle during abduction arm movement, an attempt has been made to analyze the stresses developed in the shoulder muscles during abduction arm movement during the full range of motion by using the 3D FEM model. 3D scanning (ATOS III scanner) is used for the 3D shoulder joint cad model generation in CATIA V5. Muscles are added and then exported to the ANSYS APDL solver for stress analysis. Sensitivity Analysis is done for stress and strain behavior amongst different shoulder muscles; deltoid, supraspinatus, teres minor, infraspinatus, and subscapularies during adduction arm movement. During the individual deltoid muscle analysis, the von Mises stresses induced in deltoid muscle was maximum (4.2175 MPa) and in group muscle analysis it was (2.4127MPa) compared to other individual four rotor cuff muscles. The study confirmed that deltoid muscle is more sensitive muscle for the abduction arm movement during individual and group muscle analysis. The present work provides in depth information to the researchers and orthopedicians for the better understanding about the shoulder mechanism and the most stressed muscle during the abduction arm movement at different ROM. So during rehabilitation, the orthopedicians should focus on strengthening the deltoid muscles at earliest.

• 한국의류학회지
• /
• 제32권2호
• /
• pp.340-347
• /
• 2008

A prototype of 3D clothing design system with a direct pattern development function was suggested, reflecting intuitive design functions and design modifications while considering the fit of clothing patterns with the 3D human body in the virtual 3D space. The research method was as follows. Clothing models were created using a 3D design tool, 3ds max on the surface of 3D human body model made by scanning an actual human body. 3D illustrations were completed by revising the fit and sizing of the human body and clothing models. 2D T-shirt pattern was produced 3D illustrations using from a 3D scanning data modeling solution RapidForm 2004, a 2D conversion program for 3D data called 2C-AN, and Yuka CAD. As a result, the following conclusions were made. The fit of the clothing and human body can be adjusted by reflecting individual body figure characteristics and 3D illustrations over the actual 3D body model. Furthermore, intuitive design support functions were intensified overcoming the weak point of existing 3D clothing design system by developing the direct clothing design in the virtual 3D space. 3D illustration design modifications can be directly reflected on clothing patterns from 3D illustrations by 3D clothing design system developed in this study.

• 한국산학기술학회논문지
• /
• 제12권4호
• /
• pp.1817-1823
• /
• 2011

도시철도 분야에서 멀티미디어 전송을 위하여 18GHz 대역에서 영상전송을 위한 OFDM변조 방식이 이용되고 있다. 양방향으로 영상뿐만 아니라 이더넷 데이터를 전송하기 위한 응용분야가 크게 늘고 있다. 도시철도 분야에 적용된 18GHz분야는 멀티패스페이딩에 영향이 크므로 OFDM캐리어 개수가 큰 경우가 유리하다. 그러나 이더넷 전송이 가능한 기존 WLAN의 경우 캐리어의 개수가 64개로 원거리 고속이동에 적합하지 않다. 따라서 본 연구에서 고속이동체에서 고속데이터 전송에 적합한 2,000 캐리어의 OFDM 이더넷 모뎀을 구현하고 검증하였다. 고속이동에서 도플러효과를 상쇄하기 위하여 도플러보상 블럭을 구현하였다. 도시철도 및 고속철도 분야에서 기술의 활용이 크게 기대 된다.

• 한국정밀공학회지
• /
• 제11권4호
• /
• pp.77-87
• /
• 1994

This paper deals with an automated forming sequence design system by which designers can determine desirable operation sequences even if they have little experience in the design of cold forging process. The forming sequence design in the cold forging is very important and requires many kinds of technical and empirical knowledge. They system isproposed, which generates forming sequence plans for the multistage cold forging of axisymmtrical solid products. Since the process of metal forming can be considered as a transformation of geometry, treatment of the geometry of the product is a key in planning process. To recognize the geometry of the product section, section entity representation and primitive geometries were used. Section entity representation can be used for the calculation of maximum diameter, maximum height, and volume. Forming sequence for the part can be determined by means of primitive geometries such as cylinder, cone, convex, and concave. By utilizing this geometrical characteristics (diameter, height, and radius), the product geometry is expressed by a list of the priitive geometries. Accordingly the forming sequence design is formulated as the search problem which starts with a billet geometry and finishes with a given product one. Using the developed system, the sequence drawing with all dimensions, which includes the proper sequence of operations for the part, is generated under the environment of AutoCAD. Based on the results of forming sequence, process variables(strain, punch pressure, die inner pressure, and forming load) are determined.