• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.281-289
• /
• 2002

This paper is described for the flame behaviors in light railway cabin by numerical simulation code, which can be interpreted the design parameters in terms of suppression the fire propagation and excavation the passengers safely. The results shows that the flame intensity(fire temperature, smoke density) depends on the firing points in cabin and propagates rapidly whole cabin space rather than modern subway cabin due to smaller inner space. The data will be used to how can be get the safety case, which is described on the operating principles for all facilities and logistics against to the light railway firing accidents.

• 동력기계공학회지
• /
• 제16권5호
• /
• pp.47-54
• /
• 2012

The steady three-dimensional numerical analysis on the thermal flow using standard k-${\varepsilon}$ turbulence model was carried out to investigate the air cooling effect of a cooler on the cabin for a commercial vehicle. Here, the heat exchanging method of this cabin cooler uses the cooling effect of a thermoelectric module. In consequence, the air system resistance of a cooler within the cabin is about 12.1 Pa as a static pressure, and then the operating point of a virtual cross-flow fan considering in this study is formed in the comparatively low flowrate region. The discharging air temperature of a cooler is about $14{\sim}15^{\circ}C$. Moreover, the air cooling temperature difference obtained under the outdoor cabin temperature of $40^{\circ}C$ shows about $7{\sim}9^{\circ}C$ in a driver resting space and about $9{\sim}14^{\circ}C$ in the front of a driver's seat including the space of a driver's foot.

• 한국실내디자인학회논문집
• /
• 제15권1호
• /
• pp.158-165
• /
• 2006

The space of leisure boats & yachts is formed by interior design elements and shapes are formed by combination of those elements. By means of configuration of the design elements, space is made in a ship and patterns in an inside space are made through production. These space can be categorized as (1) cabin(common cabin, staterooms, one-cabin), (2) salon, (3) galleys & dinette, (4) heads(showers, toilets, bidets, sinks), (5) cockpit, (6) wheelhouses, navigation stations, (7) fore peaks, (8) engine room, (9) deck etc. Interior materials are classified into (1) walls(bulkheads & lining wall), (2) floors(sole), (3) ceilings(overheads), (4) doors & windows, (5) furniture, (6) lightings and (7) Hardware & decoration in large, medium and small sizes, which constitute interior design elements of a leisure boat & yacht. The materials used in leisure boats & yachts have properties of lightweight, noise and vibration resistance, fire & flame retardant, stability, strengths, lifespan, appearance and special operation in construction.

• 한국산업보건학회지
• /
• 제33권2호
• /
• pp.171-187
• /
• 2023

Objectives: Aircraft cabin cleaning work is characterized by being performed within a limited time in a narrow and enclosed space. The objective of this study was to evaluate the exposure levels to dust, ultra fine dust(PM2.5) and black carbon(BC) among aircraft cabin cleaners. Methods: Active personal air sampling for respirable dust(n=73) and BC(n=47) was conducted during quick transit cleaning(cabin general and vacuum-specific) and seat cover replacement and total dust and PM2.5 were area-air-sampled as well. Also, size distribution of particle was identified with the cleaning workers targeted. Dusts were collected with PVC filters using gravimetric analysis. The concentration of PM2.5 and the particle size distribution were measured with real-time direct reading portable equipment using light scattering analysis. The concentration of BC was measured by aethalometer(filter-based real-time light absorption analysis instrument). Results: The geometric mean of respirable dust was the highest at vacuum cleaning as 74.4 ㎍/m³, following by replacing seat covers as 49.3 ㎍/m³ and cabin general cleaning as 47.8 ㎍/m³ . The arithmetic mean of PM2.5 was 4.83 ~ 9.89 ㎍/m³ inside the cabin, and 28.5~44.5 ㎍/m³ outside the cabin(from bus and outdoor waiting space). From size distribution, PM_2.5/PM₁₀ ratio was 0.54 at quick transit cleaning and 0.41 at replacing seat covers. The average concentration of BC was 2~7 ㎍/m³, showing a high correlation with the PM2.5 concentration. Conclusions: The hazards concentration levels of aircraft cabin cleaners were very similar to those of roadside outdoor workers. As the main source of pollution is estimated to be diesel vehicles operating at airports, and it is necessary to replace older vehicles, strengthen pollutant emission control regulations, and introduce electric vehicles. In addition, it is necessary to provide as part of airport-inftastructure a stable standby waiting space for aircraft cabin cleaners and introduce a systematic safety and health management system for all workers in the aviation industry.

• 한국항공우주학회지
• /
• 제34권11호
• /
• pp.70-75
• /
• 2006

조종실 여압시스템은 압력스케쥴, 압력조절 공차, 정상 및 비정상 작동시의 최대 압력변화율 및 조종실로 유입되는 최대 공기변화량과 같은 설계한계에 적절히 응답하도록 설계하여야 한다. 본 논문에서는 T-50 고등훈련기 조종실 여압시스템에 대한 압력강하 해석과 비행시험결과가 소개되었다. 압력강하 해석을 통하여 여압밸브의 출구면적을 계산한 후 무여압 구간에서의 압력공차를 예측하였다. 예측된 결과를 이용하여 D사의 여압부품을 선정하였고, 예측된 압력공차는 비행시험의 결과와 잘 일치하였다. 결론적으로 비행시험을 통하여 T-50 고등훈련기 여압시스템이 MIL-E-18927 설계기준을 만족하였다

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1288-1292
• /
• 2007

Because the indoor spaces of the passenger cabin is generally airtight to secure the safety of passengers and enhance the efficiency of the cabin air conditioning performances, the contamination pattern of them are largely similar to that of general indoor spaces. Therefore, continuous supply of outdoor air is required to keep the amenity of indoor space. Heating, ventilation, and air-conditioning (HVAC) system is composed of air cleaning filter, heater and air conditioned, blower and ducts. To achieve the clean indoor environment, an integrated control of each HVAC equipment are required. In this study, we developed the air cleaning system to enhance the amenity of the railroad passenger cabin.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.1234-1239
• /
• 2006

Because the indoors spaces of the passenger cabin is generally airtight to secure the safety of passengers and enhance the efficiency of the cabin air conditioning performances, the contamination pattern of them are largely similar to that of general indoor spaces. Therefore, continuous supply of outdoor air is required to keep the amenity of indoor space. Heating, ventilation, and air-conditioning (HVAC) system is composed of air cleaning filter, heater and air conditioned, blower and ducts. To achieve the clean indoor environment, an integrated control of each HVAC equipment are required. In this study, we developed the air cleaning system to enhance the amenity of the railroad passenger cabin.

• 항공우주정책ㆍ법학회지
• /
• 제33권2호
• /
• pp.291-314
• /
• 2018

최근 3년간 우리나라의 저비용항공사는 총 6개사(소형항공운송업 항공사 포함 8개사)로서 국내시장 점유 뿐 아니라 일본, 중국, 동남아 및 미국령까지 그 영역을 확대하고 있다. 현재에도 약 3개 항공사가 저비용항공사로 출범하고자 항공운송사업증명을 신청한 상태로서 이 확장세는 지속될 전망이다. 이러한 국내 및 외국의 저비용항공사의 공격적인 항공사 운영 실태에 대응하며 경쟁력을 제고하고자 각 저비용항공사는 객실서비스 증진에 많은 전략을 강구하고 있다. 따라서 객실승무원의 업무량이 확장세에 비례하여 증가되어 안전업무 수행 능력과 직결되는 피로를 가중시키고 있다. 우리나라는 승객 좌석 50석 당 최소 1인의 객실승무원이 탑승하도록 항공안전법 시행규칙에 규정하고 있으며, 이를 기반으로 모든 저비용항공사에는 최소 객실승무원만 탑승하고 있다. 때로는 객실승무원의 주 업무인 비상 시 비상탈출에 필요한 비상구(창문형 비상구 제외)에 착석이 불가능하게 되어 비상 시 승객의 혼란을 야기할 수밖에 없는 상황에 처해 있다. 또한 최소 객실승무원 중 1인이 부상 등으로 업무수행 불능상태가 되면 비상탈출 업무를 수행하는데 큰 장애요소로 작용하게 되고, 정상상황에서도 최소 객실승무원의 성원을 이룰 수 없으므로 위규가 되어, 모든 승객이 다른 가용한 항공사 비행편으로 이동할 수밖에 없는 불편을 초래하게 된다. 국제민간항공협약 부속서 6에는 최소 객실승무원의 수를 정할 때 안전하고 신속한 비상탈출을 위하여 승객좌석 수 또는 탑승 승객 수만을 기반으로 정하도록 국제표준으로 규정하고 있다. 객실안전의 강화 및 승객의 편의를 위하여 객실승무원의 다양한 업무특성(서비스, 안전, 보안, 응급처치)에서 발생할 수 있는 피로 및 비상구 착석(창문형 비상구 제외)을 최소 객실승무원 수 산정에 고려할 필요가 있다. 정부의 항공사 관리.감독 차원에서도 저비용항공사 객실승무원의 업무량에 기인한 피로, 비상구 착석불가 상황 등을 검토하여 최소 객실승무원 수 규정에 반영함으로써 승객과 승무원의 객실안전을 강화할 필요가 있다고 사료된다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권4호
• /
• pp.439-449
• /
• 2018

In this paper, multi-objective optimization of a multi-bubble pressure cabin in the underwater glider with Blended-Wing-Body (BWB) is carried out using Kriging and the Non-dominated Sorting Genetic Algorithm (NSGA-II). Two objective functions are considered: buoyancy-weight ratio and internal volume. Multi-bubble pressure cabin has a strong compressive capacity, and makes full use of the fuselage space. Parametric modeling of the multi-bubble pressure cabin structure is automatic generated using UG secondary development. Finite Element Analysis (FEA) is employed to study the structural performance using the commercial software ANSYS. The weight of the primary structure is determined from the volume of the Finite Element Structure (FES). The stress limit is taken into account as the constraint condition. Finally, Technique for Ordering Preferences by Similarity to Ideal Solution (TOPSIS) method is used to find some trade-off optimum design points from all non-dominated optimum design points represented by the Pareto fronts. The best solution is compared with the initial design results to prove the efficiency and applicability of this optimization method.

• 한국항해항만학회지
• /
• 제33권3호
• /
• pp.175-180
• /
• 2009

본 연구에서는 슈퍼요트의 쾌적한 실내환경조성을 목적으로 기초자료를 수집하였으며, 요트가 주로 운항되는 여름철 실내공간에 형성되는 실내환경성능에 대해 실측을 통해 분석함으로써 다음과 같은 결과를 얻었다. 1) 외부와 연결된 살롱의 문을 닫을 경우 선박배기가스의 실내유입은 거의 없으나 문을 여는 경우에는 급속히 실내공기가 오염되므로 쾌적한 실내공기환경을 유지하기 위해 실내환기방법 및 환기량에 대한 대책이 필요하다. 2) 운항 시에는 모든 실이 선원보호 소음규제치인 60dB을 넘고 있어 실내의 소음대책이 시급하다. 3) State cabin과 Guest cabin은 에어컨가동에 의해 과냉됨으로써 실내 환경이 쾌적범위를 벗어나고 있어 이에 대한 대책이 필요하다.