• Journal of Biosystems Engineering
• /
• 제26권3호
• /
• pp.237-244
• /
• 2001

This work was intended to investigate the effect of vibration transmission paths on the ride vibration of tractor during the rotavating and transporting operations by applying the vibration path analysis method. Accelerations at the cab mounts were measured during the rotavating and transporting operations. Ride vibrations at the sear were than calculated using the measured accelerations at the cab mounts, and the frequency response functions and inertances between the seat and cab mounts, which were derived experimentally by the impact hammer test in static condition. The human sensitivity to vibration frequency was also taken into consideration for the calculation of ride vibrations at the 1/3 octave center frequencies in the frequency domain. Vibrations transmitted through rear cab mounts affected more significantly the ride vibration of tractor. The peak accelerations at the seat occurred at the frequencies of the engine and crank speed, and the frequency induced by tire lugs on the road transportation. It was found that the rear cab mounts should be improved in order to reduce the ride vibrations more effectively.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.67-72
• /
• 2004

Generally, the commercial truck has the hydraulic cab tilting system which absorb the vibrations and impacts of the cab. The cab tilting system is equipped for the maintenance and inspection of truck. And it is very important to help user's feeling of driving and convenience. But when the truck cab is tilted, existing model has serious problem of vibration. To satisfy customer's requirements for convenience, it is necessary to improve the hydraulic truck cab tilting system. In this study, the optimization of cab tilting system is carried out by using the G.A to reduce the vibration. The results show that the vibration is reduced and the mean velocity of tilting is improved. In conclusion the improved cab tilting system can be designed and the possibility of optimal design for cab tilting system by using the GA is testified.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.472-475
• /
• 2014

Abnormal cab vibrations in the Y direction in commercial vehicles during driving(70~90kph) are not common vibrations that happen to vehicles during driving and can be an obstacle to normal driving. This study conducted Operation Deflection Shape(ODS) testing to identify the causes of those abnormal cab vibrations and find solutions for them and also a sine sweep test to find resonance and frequency in the cab suspension system and set directions for improvement. The study also altered the shape of the bush inner part for changes to the rigidity features of the cab bush in the Y direction and revised the design with optimal rigidity in the Y direction, thus improving abnormal cab vibrations in the Y direction during driving.

• 한국정밀공학회지
• /
• 제12권12호
• /
• pp.109-119
• /
• 1995

A driveline incorporating universal joints when driving through an angle can excite various components in a vehicle with second order excitation of torsional and bending vibrations, being transmitted either audibly(noise), or physically(vibration). For a certain range of vehicle dpeed noises can be radiated from the cab wall, in which resonances occur by the excitations transmitted from the driveline as a vibration source. In this paper, the excitation mechanism of cab noises is studied especially for the vehicle speed range of 65 .approx. 75 km/h through the simulation for torsional vibrations of the driveline and for bending vibrations of the cab of an 11 Ton grade Cargo Truck, and verified additionally by vibration and noise measurements. As a result, it is found that the uncomfortable noises in the cab are caused mainly by the abrupt increase of the joint angle of driveline near the axle differential resulted from the excessive clearance alignment of the leaf spring gate.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 추계학술대회논문집; 한국과학기술회관; 6 Nov. 1997
• /
• pp.339-344
• /
• 1997

Samsung Ltd. has developed a new-type cab mount for specific use on construct ion machinery subjected to strong vibration and multi-directional impact force. These all make it possible to achieve an excellent damping effect over a wide frequency range against large amplitude vibration as well as excellent insulation against small-amplitude vibration. This new mount make lower vibration and noise levels while increasing riding comfort at the same time. Characteristics of Cab mount were optimized through computer simulation, advanced bench testing, ODS testing, and a real equipment offroad testing.

• 제어로봇시스템학회논문지
• /
• 제5권4호
• /
• pp.496-503
• /
• 1999

In this paper, the improvement of cap tilting system in heavy truck and the development of program for automatic design are discussed. Cab tilting system takes some important roles in heavy truck, absorbing discomfort vibration from load, increasing repair efficiency and making sure of safety. Common manual cab tilting system cannot be easily tilt up in sloped road, giving difficulty to driver as cal tilting up/down. So recently hydraulic cab tilting system is in wide use. But some problem such as tilting up/down speed is not constant and sudden swing of cab has brought discredit from user. Therefore, this paper presents advanced cab tilting system which prevents sudden swing of cab and development of program for selecting design parameters automatically.

• 소음진동
• /
• 제8권4호
• /
• pp.609-615
• /
• 1998

In recent years there has been an increasing emphasis on shortening design cycles for bringing products to market. This requires the development of computer aided engineering tools which allow analysts to quickly evaluate the effect of design changes on noise, vibration, and harshness. Statistical Energy Analysis (SEA) modeling is a valuable tool for predicting noise and vibration as SEA models are inherently simpler and more robust than deterministic models. SEA modeling can be combined with design sensitivity analysis(DSA) to identify design changes which give the largest performance benefit. This paper describes SEA modeling of an equipment cab. SEA predictions are compared to test data, showing good agreement. The use of design sensitivity analysis in improving cab design is then demonstrated.

• Journal of Biosystems Engineering
• /
• 제23권4호
• /
• pp.327-334
• /
• 1998

This work was intended to determine the optimum values of the cab suspension parameters by a simulation method in order to minimize the seat accelerations of agricultural tractors in the frequencies lower than 50Hz. A dynamic model of cab motions was developed and verified using a tractor excited over half-sine bumps on a concrete test road. A simulation program based on the model was also developed. A method was proposed to determine the optimum values of the suspension parameters. It was found that the natural frequencies of the cab and seat suspensions must be apart as far as possible until the sum of seat and cab accelerations is minimized, which also reduces the seat accelerations maximally.

• 한국산학기술학회논문지
• /
• 제18권11호
• /
• pp.697-704
• /
• 2017

본 연구는 영업운행 중인 고속열차의 진동 문제를 고찰하고, 이를 개선하기 위하여 진행되었다. 먼저 고속열차의 진동 수준을 알기 위하여 차체 진동가속도에 대한 측정이 수행되었다. 측정결과 운전실이 객차보다 진동이 크며, 열차 후미로 갈수록 진동이 더 커졌다. 운전실 및 객차 모두 수직방향 진동이 횡방향 진동에 비해서 크며, 콘크리트 구간에 비해 자갈궤도에서 진동의 최대값이 크다. KTX-산천 진동 경향과 개선점을 도출하기 위하여 동역학 해석을 수행하였다. 해석결과는 시험 결과와 유사하였으며, 객차 양 끝단의 단부객차 상부와 동력차량의 진동을 저감시킬 필요가 있었다. 객차의 진동을 저감하기 위하여 KTX-호남(200호대) 차량은 4가지 개선 설계를 수행하였고, 이 중 KTX-산천에 적용할 수 있는 방법을 해석에 적용하였을 때, 정상구간에서는 2.2%, 분기기구간에서는 11% 정도 진동이 감소할 것으로 예상되었다. 동력차량의 진동 저감을 위해 2차 코일스프링의 강성을 감소시키고, 2차 수직댐퍼의 댐핑계수를 증가시키는 방안을 제안하였다. 현가장치의 불량, 오조립 등 성능저하가 차체 및 대차의 진동을 증가시키는 것을 시운전 결과와 해석결과를 통하여 살펴보았으며, 현가장치 올바른 유지보수가 차량 진동을 저감시킴을 알 수 있었다. 차륜 마모에 대한 적절한 관리는 운행 효율 및 차체 진동저감에 중요한 역할을 하며, 현재 차륜 프로파일을 변경하여 차륜 삭정간의 주행거리를 늘리려는 연구가 진행 중이다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1461-1466
• /
• 2000

This paper investigates the noise reduction scheme in tractor cabin by using various steps of experiment. The experiments were performed in the field as well as in the lab to facilitate the detail test procedure. Some of the test results were compared with computational results. Several noise sources and paths were identified including the engine compartment (cooling fan and timing gear cover), hydraulic system and its components (hoses, tubes and there mount) and structural characteristics of the cab, window, mounting bracket and machine frame including steps. Throughout the several design changes, cab noise level was reduced from 80.2dBA to 74.8dBA.