• 제목/요약/키워드: CaSR

검색결과 1,031건 처리시간 0.023초

Bi$_2$Sr$_2$Ca$_{1-x}$Na$_x$Cu$_2$O$_{8+y}$ 산화물 고온초전도체의 Ca 위치에 Na 치환 효과 (Effect of Na Substitution for the Ca Site in the Bi$_2$Sr$_2$Ca$_{1-x}$Na$_x$Cu$_2$O$_{8+y}$ Superconductors)

  • 이민수;송승용;이종용;송기영;최봉수
    • 한국세라믹학회지
    • /
    • 제35권10호
    • /
    • pp.1007-1013
    • /
    • 1998
  • The samples of Bi2Sr2Ca1-xNaxCu2O8+y with various carrier concentration were synthesized by substituting Na for Ca ion. The superconducting properties hall coefficients and X-ray powder diffraction were measur-ed the sampled. Single phase samples were obtained for 0$\leq$x<0.3 of Bi2Sr2Ca1-xNaxCu2O8+y In the single phase the critical temperature. {{{{ { T}_{c } }} and carrier concentration increase with the increase of Na concentration pass through a maximum and then decreases. In the range of x$\geq$0.7 to the Na doped samples however we observed the metal-semiconductor transition. The c-axis seemed to decrease and a and b-axes increase with increasing Na concentration in the single phase. Decreasing of c-axis while increasing x is due to the smaller size of {{{{ {Na}^{+1 } }} ions to the {{{{ { Ca}^{+2 } }} ions. In the range of x>0.3 however the trend becomes ambiguous due to the inclusion of the 10K phase and impurity phase.

  • PDF

Sr resin을 이용한 방사성 스트론튬 분리의 최적화 (Optimization of Radiostrontium Separation Process Using Sr Resin)

  • 정윤희;김현철;서경석;강문자;정근호
    • 방사성폐기물학회지
    • /
    • 제13권2호
    • /
    • pp.123-130
    • /
    • 2015
  • 순수 베타 핵종인 90Sr 분석은 화학적 거동이 유사한 알칼리 토금속(Ca, Ba, Ra)등 방해 원소를 제거할 분리 공정이 필요하다. 본 연구는 Sr을 추출/정제하기 위해 추출크로마토그래피법을 이용한 최적의 절차를 마련하는 것을 목적으로 한다. Sr resin 1.5 mL BV(Bed Volume)의 최대 Sr 흡착량은 6 mg이었다. 유량 1 mL min-1과 Ca 200 mg 이하에서는 Sr resin 1.5 mL(BV)의 Sr 회수는 정량적이었으나, 유량을 5 mL min-1으로 중가 시키면 Sr 회수율이 감소하였다. 같은 양(BV)의 Sr resin을 사용할 경우, 컬럼의 단면적이 작을수록 Sr resin의 분리능이 향상되었다.

마이크로파 공진자용$Ba_{1-x}A_x(Mg_{1/3}Nb_{2/3})O_3$(A = Sr, Ca) (The Dielectric Properties of $Ba_{1-x}A_x(Mg_{1/3}Nb_{2/3})O_3$(A=Sr, Ca) Ceramics for Microwave Resonator)

  • 김부근;김재윤;김강언;정수태;조상희
    • 한국전기전자재료학회논문지
    • /
    • 제13권6호
    • /
    • pp.478-484
    • /
    • 2000
  • The structural changes and the microwave dielectric properties of $Ba_{1-x}$/A$_{x}$/(Mg$_{1}$3//Nb$_{2}$3/)O$_3$(A=Sr, Ca=x0, 0.2, 0.4, 0.6, 0.8, 1.0) were investigated. The densities of samples are gradually decreased with increasing x(BMN=6.1, SMN=5.22 and CMN=4.26 g/m$^3$)The crystal structure of BMN was untilting of oxygen octahedral. The structural changes of BSMN showed the antiphase tilting at x>0.4, and those of BCMN showed the antiphase tilting at 0.20.8. The variation of dielectric constant with Sr was small(BMN=32, SMN=30) However the variation with Ca was large the highest value was 42 at Ca=0.2(CMN=25) The maximum quality factor was 68,000 GHz at Sr=0.2 and the minimum quality factor was 3,000 GHz at Ca=0.2 (BMN=35,000, SMN=20,000 and CMN=23,000 GHz) The temperature coefficients of resonant frequency of BSMN were about 2 times larger than those of BCMN in all composition.ion.

  • PDF

알칼리 금속 이온의 입계확산에 따른 $(SrCa)TiO_3$ 소결체의 입계구조 및 전기적 특성 (Grain boundary structure and electrical characteristics of alkaline metallic cation-diffused $(SrCa)TiO_3$ ceramics)

  • 허현;조남희
    • 한국군사과학기술학회지
    • /
    • 제2권1호
    • /
    • pp.183-193
    • /
    • 1999
  • 환원분위기 소결조건에서 반도성 (Sr0.85Ca0.15)TiO3 소결체를 제조한후, 금속 양이온(Na, K)을 소결체 입계를 통해 확산시켜 확산시간과 확산량에 따른 소결체의 전기적 특성 변화를 고찰하였다. K이온과 Na 이온을 입계확산시킨 경우 반도성 소결체는 바리스터 특성을 나타내며, 확산시간과 확산량이 증가함에 따라 문턱전압이 증가하였다. 이들 소결체의 입계전위장벽은 0.01 ~ 2.89 eV이며 입계저항은 2.2 ~ 120.4 $M{\Omega}$ 값을 나타냈다 투과전자현미경을 이용하여 입계의 구조를 관측하였으며 이들 결과와 소결체의 전기적 특성과의 상관관계를 고찰하였다.

  • PDF

${Sr_{1-x}}{Ca_x}{TiO_3}$$_3$:$Pr^{3+}$,$Ga^{3+}$ 형광체의 발광메커니즘 (The Luminescence Mechanism of ${Sr_{1-x}}{Ca_x}{TiO_3}$$_3$:$Pr^{3+}$,$Ga^{3+}$ Phosphor)

  • 장보윤;이용제;이현덕;변재동
    • 한국세라믹학회지
    • /
    • 제38권2호
    • /
    • pp.107-111
    • /
    • 2001
  • Sr$_{(1-x)}$Ca$_{x}$TiO$_3$: Pr$^{3+}$ , Ga$^{3+}$ (0$\leq$x$\leq$1) 형광체의 여기 및 발광 스펙트럼과 분광 반사율을 조사하여 발광 메커니즘을 규명하고자 하였다. 발광 스펙트럼에서는 611~614nm 사이에서 peak을 가지는 하나의 적색 발광 밴드가 관찰되었으며, 조성에 따라 발광밴드의 모양이 달랐다. 이는 조성에 따른 모체의 결정 구조 변화 때문으로 생각된다. 여기 스펙트럼 끝단과 분광 반사율 스펙트럼의 흡수단은 서로 일치하였으며, 이 결과로부터 모체에 흡수된 에너지가 Pr$^{3+}$ 에 전달되어 적색광을 방출하는 것이 주된 메커니즘으로 생각된다. 한편 120$0^{\circ}C$에서 4시간동안 열처리하여 합성한 Sr$_{0.4}$Ca$_{0.6}$TiO$_3$:(0.1 mol%)Pr$^{3+}$ , (0.2 mol%)Ga$^{3+}$ 는 우수한 색순도와 휘도를 나타내었다.다.

  • PDF

부착율 개선을 위해 증발 법으로 제작한 Bi2Sr2CanCun+1Ox 박막의 부착 특성 (Sticking Characteristics in Bi2Sr2CanCun+1Ox Thin Films Fabricated by using the Evaporation Method to Improve the Sticking Ratio)

  • 천민우;박용필
    • 한국전기전자재료학회논문지
    • /
    • 제16권11호
    • /
    • pp.1029-1034
    • /
    • 2003
  • The Bi$_2$Sr$_2$Ca$_{n}$Cu$_{n+1}$ O$_{x}$, superconducting thin films arc fabricated by using the sputtering and evaporation method. Because we confirmed the sticking ratio of Bi element in the Bi$_2$Sr$_2$Ca$_{n}$Cu$_{n+1}$ O$_{x}$ superconducting thin film fabricated by using the sputtering method was much lower than the expected value, to get the enough number of the flakes of Bi, faraday cup was used to evaporate Bi clement. As a result of the fabrication, Bi 2201 and Bi 2212 single phases could be made by the optima of deposition condition. And we confirmed the sticking coefficient of Bi element was clearly related to the temperature change of the substrate and the generation of Bi22l2 phase

Thermoelectric properties of La(1-x)MxCoO3(M=Sr, Ca;x=0, 0.1) ceramics for thermal sensors

  • 강민규;조광한;강종윤;김진상;김상식;윤석진
    • 센서학회지
    • /
    • 제18권3호
    • /
    • pp.234-238
    • /
    • 2009
  • We have investigated the effects of dopant on the thermoelectric properties that $La_{(1-x)}M_xCoO_3$(M=Sr, Ca;x=0, 0.1) bulk ceramics fabricated by the conventional solid state reaction method. The Seebeck coefficient of $La_{(1-x)}M_xCoO_3$(M=Sr, Ca;x=0, 0.1) bulk ceramics was measured at wide temperature range from 300 K to 673 K. The thermoelectric properties(Seebeck coefficient and electrical resistivity) depend strongly on the kinds of dopants. Sr and Ca dopant decrease the Seebeck coefficient. Density of sintered $La_{0.9}Sr_{0.1}CoO_3$ ceramic at 1523 K was 7.12 $g/cm^2$ and Seebeck coefficient was 35 ${\mu}V/K$ at 663 K. However, the electrical resistivity of the Sr doped sample was low and stable.

Spray Pyrolysis에 의한 초전도 합성 (Fabrication of Superconducting Thick Film by Spray Pyrolysis Method)

  • 이상헌
    • 전기학회논문지
    • /
    • 제59권1호
    • /
    • pp.120-122
    • /
    • 2010
  • In this paper the effect of constituent content on superconductivity and phase in BiPbSrCaCuO system was reported. The zero resistance temperature reaches as high as 100k when dophant Sb was decreased dramatically with increasing Sb content in BiPbSrCaCuO system while the corresponding phase was changed fundamentally.

소결 후 열처리 조건이 Bi(Pb)SrCaCuO계 초전도 특성에 미치는 영향 (Influence of firing conditions after sintering treatment on superconducting characteristics of Bi(Pb)SrCaCuO system)

  • 박용필;이성우;이준웅
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제4권4호
    • /
    • pp.293-303
    • /
    • 1991
  • 소결 후 냉각 및 Annealing이 Bi(Pb)SrCaCuO계 초전도체의 특성에 미치는 영향에 대해 연구하였다. 소결 후 시편을 500[.deg.C]에서 5[hr] Annealing함으로써 1)미세조직이 치밀화 되었으며 고온상의 체적비가 증가하였다. 2)임계온도 및 전류밀도 특성이 향상되었다.

  • PDF

Bi계 초전도체의 Magnetic Suspension (Magnetic Suspension Effect of BiPbSrCaCuO Superconductor)

  • 이상헌
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 추계학술대회 논문집
    • /
    • pp.101-103
    • /
    • 2001
  • Suspension effect has been studied by using superconductor of BiPbSrCaCuO ceramics containing Ag$_2$O It has been cleared that Ag$_2$O acts as pinning center which plays an important role to the suspension effect. Magnetic repulsive force which affects a superconductor located in magnetic flux from toroidal magnet has been investigated. It has been concluded that the suspension effect arises from the interaction between the pinning effect and the diamagnetic effect.

  • PDF