• The Korean Journal of Applied Statistics
• /
• v.27 no.5
• /
• pp.787-796
• /
• 2014

Situations where sample size is not constant are common when monitoring a process with Poisson count data. In this paper, we propose a generalized likelihood ratio(GLR) control chart to detect shifts in the Poisson rate when the sample size varies. The performance of the proposed GLR chart is compared with the performance of several cumulative sum(CUSUM) type charts. It is shown that the overall performance of the GLR chart is comparable with CUSUM type charts and is significantly better in cases where the actual value of the shift is different from the pre-specified value in CUSUM type charts.

• The Korean Journal of Applied Statistics
• /
• v.27 no.2
• /
• pp.345-355
• /
• 2014

The number of nonconformities in a unit is commonly modeled by a Poisson distribution. As an extension of a Poisson distribution, a zero-inflated Poisson(ZIP) process can be used to fit count data with an excessive number of zeroes. In this paper, we propose a generalized likelihood ratio(GLR) chart to monitor shifts in the two parameters of the ZIP process. We also compare the proposed GLR chart with the combined cumulative sum(CUSUM) chart and the single CUSUM chart. It is shown that the overall performance of the GLR chart is comparable with CUSUM charts and is significantly better in some cases where the actual directions of the shifts are different from the pre-specified directions in CUSUM charts.

• The Korean Journal of Applied Statistics
• /
• v.29 no.5
• /
• pp.823-833
• /
• 2016

The lifetime is a key characteristic of product quality. It is best to obtain the lifetime data of all samples, but they are often censored due to time or expense limitations. In this paper, we propose a binomial cumulative sum (CUSUM) chart to monitor the mean of type I right-censored Weibull lifetime data, for a xed value of the Weibull shape parameter. We compare the performance of the proposed binomial CUSUM chart with CUSUM charts studied previously using the steady-state average run length (ARL). The results show that the performance of the binomial CUSUM chart is better when the censoring rate is high and/or the sample size is small.

• The Korean Journal of Applied Statistics
• /
• v.22 no.6
• /
• pp.1191-1201
• /
• 2009

The cumulative sum(CUSUM) control charts are typically used for detecting small level shifts in process control. To control an auto-correlated process, the model-based control methods can be employed, in which the residuals from fitting a time series model are applied to the CUSUM chart. However, the persistent level shifts in the original process may lead to varying mean shifts in residuals, which may deteriorate detection performance significantly. Therefore, in this paper, focussing on ARMA(1,1), we propose a new CUSUM type control method which can detect the dynamic mean shifts in residuals especially with oscillating pattern effectively and, through the simulation study, evaluate its performance by comparing with other various CUSUM type control methods introduced so far.

• Journal of Korean Society for Quality Management
• /
• v.33 no.4
• /
• pp.96-102
• /
• 2005

Cusum control chart is an efficient method to detect the change of process status. Many variants of cusum have considered, and the effects of design parameters have reviewed. To find the best cusum out of variants and to decide the best values of the design parameters, we need a criterion measuring the performance of the cusum control chart. People used and suggested several criterions which appear to be similar, but those have quite different properties. In this paper we review the properties of performance measure of cusum and its variants. Our goal is to provide fair and impartial criterion for comparison of cusums when the decision boundaries of the cusums are much different each other. We comparatively tested newly suggested measure and traditional measure with the examples of cumulative scored chart as a special case of cusum chart.

• Journal of Korean Society for Quality Management
• /
• v.33 no.3
• /
• pp.126-134
• /
• 2005

This paper proposes a selectively cumulative sum(S-CUSUM) control chart for detecting shifts in the process mean. The basic idea of the S-CUSUM chart is to accumulate previous samples selectively in order to increase the sensitivity. The S-CUSUM chart employs a threshold limit to determine whether to accumulate previous samples or not. Consecutive samples with control statistics out of the threshold limit are to be accumulated to calculate a standardized control statistic. If the control statistic falls within the threshold limit, only the next sample is to be used. During the whole sampling process, the S-CUSUM chart produces an 'out-of-control' signal either when any control statistic falls outside the control limit or when L -consecutive control statistics fall outside the threshold limit. The number L is a decision variable and is called a 'control length'. A Markov chain approach is employed to describe the S-CUSUM sampling process. Formulae for the steady state probabilities and the Average Run Length(ARL) during an in-control state are derived in closed forms. Some properties useful for designing statistical parameters are also derived and a statistical design procedure for the S-CUSUM chart is proposed. Comparative studies show that the proposed S-CUSUM chart is uniformly superior to the CUSUM chart or the Exponentially Weighted Moving Average(EWMA) chart with respect to the ARL performance.

• Proceedings of the Safety Management and Science Conference
• /
• 2013.11a
• /
• pp.147-160
• /
• 2013

이 논문은 공정변화를 보다 잘 감지할 수 있는 관리도의 개발동향에 주안점을 두고 있으며, 경제적 접근법으로 관리모수를 설정하여 공정관리 메카니즘을 사용하는데 있어서 최소의 비용을 가지도록 하여 품질 향상 비용을 절감시킬 수 있는 설계 접근방법을 조사 연구했다. 또한 CUSUM 관리도를 기존의 다양한 관리도와 결합하여 개발된 새로운 관리도를 비교했다. 비교된 관리도의 경제적 모형설계를 통하여 공정 품질에서의 경제적인 영향의 최적화를 위한 관리모수를 제시했다. 이는 공정평균의 이동을 감지하기 위한 결합 관리도를 개발하는 경제적설계 절차를 제시했다.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2004.04a
• /
• pp.57-63
• /
• 2004

CUSUM control charts are widely used to monitor processes with small shifts. CUSUM control charts, however, are less effective in detecting for recurring cycles or frequent small shifts in the process. With Shewhart control charts, we have applied the variety of run rules to check the stability of process in addition to the situations that some points fall outside the control limits. In this paper, we propose the Z-CUSUM control chart for monitoring the process with recurring cycles or frequent small shifts by use of the zone concept as like the Shewhart control charts.

• The Korean Journal of Applied Statistics
• /
• v.10 no.2
• /
• pp.385-401
• /
• 1997

Cumulative sum (CUSUM) control charts are widely used in industry for the statistical process control. The statistical design procedure in CUSUM charts tells how to choose the decision interval value. The decision interval is primarily determied by the desired in - control ARL - that is, by the acceptable frequency of false out-of-control signals. In this paper we propose a new approximation method for calculating the ARL and determining the decision interval. The performance of the proposed method is examined by evaluating the accuracy of estimated ARLs and decision intervals in normal and exponential cases.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.12
• /
• pp.73-82
• /
• 2020

Most process date such as semiconductor and petrochemical processes, autocorrelation often exists between observed data, but when the existing SPC(Statistical process control) is applied to these processes, it is not possible to effectively detect the average change of the process. In this paper, when the average change of a certain size occurs in the process data following a specific time series model, the average of the residuals changes according to the passage of time, and the change pattern of the average is introduced around the ARMA(1,1) process. Based on this result, the reference value required in the design process of the CUSUM (Cumulative sum) control chart is appropriately considered by considering the type of the time series model of the process data of the CUSUM control chart that can detect small mean changes in the process and the width of the process mean change of interest. It was confirmed through simulation that it should be selected and used.