• Journal of Applied Reliability
• /
• v.15 no.2
• /
• pp.90-100
• /
• 2015

Reliability growth rate (or reliability growth curve slope) have the two cases of trend as a constant or changing one during the reliability growth testing. The changing case is very common situation. The reasons of reliability growth rate changing are that the failures to follow the NHPP (None-Homogeneous Poisson Process), and the solutions implemented during test to break out other problems or not to take out all of the root cause permanently. If the changing were big, the "Goodness of Fit (GOF)" of reliability growth curve to test data would be very low and then reduce the accuracy of assessing result with test data. In this research, we are using Duane model and AMSAA model for assessing test data and projecting the reliability level of complex and repairable system as like construction equipment and vehicle. In case of no changing in reliability growth rate, it is reasonable for reliability engineer to implement the original Duane model (1964) and Crow-AMSAA model (1975) for the assessment and projection activity. However, in case of reliability growth rate changing, it is necessary to find the method to increase the "GOF" of reliability growth curves to test data. To increase GOF of reliability growth curves, it is necessary to find the proper parameter calculation method of interesting reliability growth models that are applicable to the situation of reliability growth rate changing. Since the Duane and AMSAA models have a characteristic to get more strong influence from the initial test (or failure) data than the latest one, the both models have a limitation to contain the latest test data information that is more important and better to assess test data in view of accuracy, especially when the reliability growth rate changing. The main objective of this research is to find the parameter calculation method to reflect the latest test data in the case of reliability growth rate changing. According to my experience in vehicle and construction equipment developments over 18 years, over the 90% in the total development cases are with such changing during the developing test. The objective of this research was to develop the newly assessing method and the process for GOF level increasing in case of reliability growth rate changing that would contribute to achieve more accurate assessing and projecting result. We also developed the new evaluation method for GOF that are applicable to the both models as Duane and AMSAA, so it is possible to compare it between models and check the effectiveness of new parameter calculation methods in any interesting situation. These research results can reduce the decision error for development process and business control with the accurately assessing and projecting result.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.29 no.2 s.43
• /
• pp.67-77
• /
• 2003

Two categories of cosmetic products, cosmetics and quasi-drugs, have been established by the Ministry of Health, Labor and Welfare (MHLW) in Japan. Japanese pharmaceutical law has defined that products categorized as cosmetics do not exhibit any effects on human skin. In fact, cosmetic products are not permitted to claim any efficacy. On the other hand, products in the quasi-drug category can claim several efficacies such as anti-inflammatory effects, whitening/lightning effects, hair growth effects and so on. Unfortunately, the Japanese MHLW has not yet approved the efficacy of anti-aging/anti-wrinkle effects as a claim point. However, the population is aging, and the demand for anti-aging/anti-wrinkle products is increasing year by year. Japanese cosmetic companies have proposed to the MHLW that anti-aging/anti-wrinkle agents be approved as a claim concept of a quasi-drug. However, unified evaluation methods for anti-aging/anti-wrinkle effects have not been established. Currently, each company evaluates the efficacy of products/materials using their own original methods. Thus, to request approval of the MHLW, the establishment of a unified evaluation method is needed. Consequently, the Japan Cosmetic Industry Association (JCIA) has established a task force to develop guidelines for evaluating anti-wrinkle effects in 1998. In conclusion, the JCIA would like to adopt visual and image analysis scales to evaluate the anti-wrinkle effects objectively. Generally, wrinkles are roughly classified into three groups as fine wrinkles, linear deep wrinkles and crow's feet. However, academic societies of dermatology or cosmetics have not yet established a definition of wrinkles in Japan. Thus, in advance of setting up an evaluation method, the definition of wrinkles f3r evaluation must be decided. Wrinkles are defined by the task force of the JCIA as follows; furrows that people can recognize visually and that appear on the forehead, the corners of the eyes and the backs of the neck with aging. In addition, furrows are emphasized by exposure to solar light and by dry conditions. Visual evaluation is the most sensitive method and can be applied to most types of wrinkles. However, visual evaluation is hard to express digitally as results. Besides, in the case of image analysis, comparisons of data obtained from distinct examinations can not be done, because data from image analysis are relative values. Thus, to enhance the reliability of the evaluations, the adoption of an objective scale was required. The principle of the evaluation method is to analyze images taken from silicone replicas of wrinkle areas using several parameters, such as the proportion of the wrinkle $area({\%})$, the mean depth of the wrinkles (mm), the mean depth of the deepest wrinkle (m) and the deepest point on the deepest wrinkle. Lights are shown on the skin replica from an orthogonal direction of the main orientation of the wrinkle, and the resulting shadow images are quantified by the image analysis method. To increase the precision of the data or to allow comparisons of independent examinations, a scale with furrows of several depths, 200, 400, 600, 800, and $1000{\mu}m$, is adapted in the evaluation system. I will explain the guidelines established by the JCIA in the presentation.

• Journal of Technologic Dentistry
• /
• v.37 no.3
• /
• pp.131-144
• /
• 2015

Purpose: This study set out to propose plans for more efficient and effective clinical practice by investigating the current state of clinical practice in the field of dental technology and thus provide basic data to develop pre- and post-education programs for clinical practice. Methods: The subjects include dental technicians at dental technical laboratories that were appointed as the place of clinical practice by the Department of Dental Technology of G University. The survey period spanned from December 22, 2014 to January 20, 2015. Total 250 questionnaires were distributed to them, and 190(76.0%) were returned. After excluding 23 whose answers were uncertain or seemed to lack reliability, total 167(66.8%) were used in final analysis. Results: 1. The most frequent practice the student did during clinical practice was articulator attachment, which was followed by pin operation or model making, one's own task and practice, sand and crow sculpturing, burying, casting, and grinding. 2. In case of going through the entire process, porcelain had the most students at 39(23.4%), being followed by crown & bridge at 28(16.8%), clinical model at 23(13.8%), full denture at 17(10.2%), and partial denture at 17(10.2%) in the order. 3. Of the students, 59.8%(30.5% for reinforced basic practice; 29.3% for intensive practice education) said that intensive practice education should be reinforced in school; and 22.3% said that intensive theory and practice education was needed, which indicates that 82.6% voiced their opinion of reinforcing education around practice. 4. The students felt that they lacked diligence, passion, and theoretical knowledge somewhat and were relatively good at clinical adaptation and operational skills. Conclusion: The findings show that the students felt an absolute lack of practice education as the school education was focused on theory and national exams in the field of dental technology, thus raising a need to reinforce practice education. Of all the respondents, 62.9% said there was a need to improve the current education with a focus on jobs. In future, education of dental technology should work to bring up able dental technicians that can perform in clinical dental technology right after graduation by reinforcing job-based practice education.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.34 no.2
• /
• pp.129-135
• /
• 2008

In this study, the potential anti-aging properties of Prunella vulgaris extract were investigated. According to our results, Prunella vulgaris extract increased collagen synthesis(74.7% at 250 ${\mu}g/mL$) and decreased on MMP-1 synthesis(90.2% at 200 ${\mu}g/mL$) and elastase activity(43.7% at 2.0%). Furthermore, it also showed free radical scavenging activity(76.9% at 2.0%) and reduced $H_2O_2$-induced cytoxicity(49.9% at 2.0%). A double-blind clinical study to investigate the effect of Prunella vulgaris extract on the skin's surface was conducted with 22 healthy volunteers, aged 34 to 48 years. The volunteers applied a cream formula with 4.0% of Prunella vulgaris extract, or placebo cream, on each crow's feet twice a day for 12 weeks. Skin wrinkles were evaluated with the naked eye and instrumental image analysis of silicone replicas, followed by statistical analysis. Twelve weeks after application of cream formula with 4.0% of Prunella vulgaris extract, we found significant improvement of facial wrinkle. Moreover, silicone replica analysis confirmed notable improvement in average of R2 and R3 at 12 weeks(p<0.05). These results demonstrate that Prunella vulgaris provides a remarkable and significant tensor and anti-wrinkle effect on the skin, which could be of great use in anti-aging skin care products.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.42 no.3
• /
• pp.303-309
• /
• 2016

The human skins had a lot of changes as aging. The synthesis of collagens and elastic fibers were reduced and the expression of matrix metalloproteinase (MMPs) was increased in the dermis. These changes have been known to be responsible for skin wrinkle formation. In this study, we tried to develop pre-indicator of inner skin aging, and investigated the effect of the cream product containing Gynostemma pentaphyllum gypenoside fraction (Gynostemma pentaphyllum gypenoside cream). 21 ~ 34 years old 52 Korean female volunteers without crow's feet were chosen for this clinical study. The starting point of inner skin aging was confirmed through dermal density measurement, even though outside skin wrinkles were not observed. In addition, 4 and 8 weeks treatment of G. pentaphyllum gypenoside cream significantly increased age-related reduction of dermal density. These results suggest that the evaluation of dermal density can be used as pre-indicator of skin aging. Furthermore, G. pentaphyllum gypenoside fraction is a potential anti-wrinkle agent for prevention and treatment of skin aging.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.43 no.4
• /
• pp.297-307
• /
• 2017

Skin properties are influenced by a variety of internal or external factors. This study was conducted to investigate and compare the skin characteristics in Asian women. We evaluated values of skin physical parameters, and then assessed the correlations among the parameters, and regional differences in 1,500 Asian subjects in seven countries (Malaysia, Indonesia, Vietnam, Thailand, India, China, and South Korea). The values of transepidermal water loss (TEWL), pH, skin hydration, sebum content, skin sensitivity, elasticity, crow's feet wrinkles, and skin brightness were measured. New Delhi's women were observed to have a lower level of hydration in stratum corneum, sebum content, stinging scores, and darker skin color than others. Furthermore, their skin surface pH on all sites is the highest among seven countries. Vietnamese had the lowest pH values in skin surface. Korean and Chinese had generally higher elasticity and fewer wrinkles. Both the skin hydration and TEWL had positive correlations with the stinging test, and there was a negative correlation between wrinkles and stinging test. These results represent that there was no clear trend related to the area or region. Skin physical parameters should be studied along with understanding of regional differences and various factors (skin care habits, lifestyle and personal sensitivity).

• Korean Journal of Environment and Ecology
• /
• v.34 no.5
• /
• pp.425-435
• /
• 2020

This study aims to investigate the impact of the physical structure, such as altitude, slope gradient, slope direction, and topographical structure, and the vegetation pattern, such as existing vegetation, diameter of breast height (DBH), and crown density, on climate. The analysis results showed the significant difference in relative humidity, wind speed, and solar radiation at varying altitudes, the significant difference in all climate factors except for the wind speed at varying slope gradient, and significant difference in temperature and relative humanity at varying slope direction. The topographic structures were divided into valleys, slopes, and ridges. They were found to differ in relative humidity. However, the differences between constant trends and types were found to be insignificant concerning temperature, wind speed, and solar radiation. Significant differences in temperature, relative humidity, and wind speed were recorded with changing existing vegetation. The DBH showed a significant difference in temperature, wind speed, and solar radiation. The crown density showed a significant difference in temperature and solar radiation. The result of the relationship analysis for the analysis of the effect of vegetation pattern and physical structure on the meteorological environment showed that temperature was affected by slope gradient, slope direction, DBH, and crown density. The relative humidity was correlated with the altitude, slope gradient, slope direction, and topological structure in physical structure and the existing vegetation and crow density in vegetation pattern. The wind speed was correlated with the altitude, existing vegetation, and DHB, and the solar radiation was correlated with the slope gradient, DHG, and crown density. The crown density was the most overall significant factor in temperature, relative humidity, and solar radiation, followed by the slope gradient. DBH was also found to be highly correlated with temperature and solar radiation and significantly correlated with wind speed, but there was no statistically significant correlation with relative humidity.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.33 no.4
• /
• pp.26-37
• /
• 2015

This paper aims to review all landscaping elements of Donggwoldo by building and identify the palatial garden landscaping characteristics and landscaping methods in a bid to explore landscaping methods applicable for modern-time gardens of Korea through Succession of Tradition. The research methodology was adopted by which the palatial gardens appearing in Donggwoldo were observed according to garden elements to identify their characteristics. Garden elements in Donggwoldo include oddly shaped stones, ponds, buildings and Madang, borders and areas, and trees. Their characteristics were analyzed, and as a result they are outlined as follows. Location : Buildings in Donggwoldo were located in the optimal areas within the Myungdang (the best location), with the building sites being created by transforming the natural topography positively according to the existing topography and uses. Tree planting : The construction of the buildings involved using the existing trees. There were no specific principle and method of planting trees, and no specific criteria for choosing the kind of tree. Symmetrical planting was adopted and its is considered embracing the viewpoint of making gardens based on the expression of Yin and Yang. Strongly symbolical kinds of trees were also adopted. Bangji : it takes a nearly circular shape in palatial gardens, and such shapes represent conceptual and abstract symbols. They were also frequently used as the place of public entertainment. Pavilions : they did not take a certain standard shape. They had diverse shapes, including a triangle, square, pentagon, hexagon, and octagon and cross. Oddly shaped stones : Oddly shapes stones and stone cases were deployed mainly near the bedroom and the crow prince's residence and in the rear garden. Hwagye : it appeared mainly in the back of the bedroom, the crown prince's residence, the princess's residence, and other women's quarters. Chwibyeong : it was installed for the purpose of drawing the natural energy like a natural inlet instead of being the nature-dividing wall. Korea's garden composition method was very different from the Western and Chinese method. Overall, Chosun palatial garden style was characterized by strict and Confucian features, while the garden construction method adopted the Taoism thought. Yet, the gardens had a carefree aspect.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.3
• /
• pp.242-248
• /
• 2012

Children usually have varying degree of caries in primary anterior teeth, and treatment planning for each case prescribed by each dentist can also be varied. This survey was conducted to compare the preferred treatment method and restorative materials between general dentists and pediatric dentists in regard to the treatment of primary incisors. The questionnaires, composed of 18 questions were sent to 45 general dentists and 50 pediatric dentists. Among which 30 and 31 questionnaires were retrieved respectively. The collected data were analyzed by rate and the results were as follows: 1. For the teeth with initial caries without cavitation, general dentists showed the tendency to prefer restorative treatment(30%) or observation without any treatment(42%), whereas pediatric dentists prefer preventive treatment(76%). 2. The primary factor in choosing restorative materials by both groups was its manipulativeness. 3. For anterior esthetic restoration, general dentists seldom use the full-coverage restoration(13%) but resin restoration(75%), whereas pediatric dentists frequently used full-coverage crow(64%). 4. In the treatment of dentinal caries, pediatric dentist did not perform the treatment lesser than 2.0 years before the exfoliation (compared to 1.2 years of general dentist). 5. In the treatment of 1 year children, both pediatric and general dentists tend to select preventive procedure as first choice of treatment(84%, 52%). When treating primary incisor caries, it is shown that pediatric dentists are more interested in restorative/preventive treatment than general dentists are.

• Cartoon and Animation Studies
• /
• s.51
• /
• pp.129-158
• /
• 2018

China has had many excellent Chinese-style animation since the 1950s. These animations are of distinctive Chinese national characteristics. They have won many awards both at home and abroad, such as "Feelings of Mountains and Waters", "Uproar In Heaven", "Why is the Crow Black-Coated" and so on. But nowadays, Chinese animations that mimics Japanese and American animation are very often, and there are few animation works with rich traditional Chinese culture. There are some works in the name of Chinese style, but they have not been fully accepted by the audiences. If one wants to create animated works of Chinese style, the author must have an in-depth understanding of Chinese traditional and folk art. Animation can not be designed only on the surface. This paper mainly studies the traditional five color concept in China and its application in animation. The purpose is to provide some references to differentiate Chinese animation from other countries in terms of style and color. The main content of this paper is to understand the concept and history of Chinese traditional five color views, and to know that this color system has reflected the ancestors' concept of nature and society. On the basis of five monochromatic colors, red, yellow, green, white and black, it is a kind of complex color concept that has been developed and perfected continuously after a long period of accumulation and precipitation in the practice of life. It is the theoretical basis of Chinese traditional color system and a complete set of historical, cultural, philosophical and religious theories. Finally, this paper analyzes the colors and their symbolic meanings of the main roles in "Uproar In Heaven", a color long animation produced by Shanghai Animation Film Studio, including Sun Wukong, the Jade Emperor and Na Zha. Color is the first visual language. The use of color symbols to express the inner feelings, status, good and evil of the characters will affect the audience's emotions, behaviors and opinions imperceptibly. The traditional Chinese five color concept has gone through such a long history, and its symbolic meaning has a more profound impact on Chinese people. Applying the color concept and symbolic meaning of Chinese traditional five color concept will further highlight the personalities and emotions of the roles in Chinese style animations. This paper takes the five-color view as the theoretical basis, and through the analysis of cartoons with traditional Chinese color, the author finds ways to flexibly use traditional Chinese culture.