• Journal of Korean Academy of Nursing
• /
• v.4 no.1
• /
• pp.95-106
• /
• 1974

The Purpose of this study was to observe the body temperature changes of newborn infants in general crib and electric heat crib after birth for the period required to reach the optimum body temperature. Forty-seven newborn infants who were delivered at Seoul National University Hospital during the period from June 12 to September 13, 1973 were chosen as Subjects for this study. The criteria for the choice of subjects were the babies with normal spontaneous delivery; body weight 2.5kg and over at birth; Apgar so ore seven and over and gestation period over thirty-six weeks. Of these subjects, by random sampling thirty-one newborn infants were placed in the general crib and sixteen in the electric-heat crib. The rectal body temperature of these newborn infants were taken and recorded at fifteen-minute interval for the first one hour period after birth, at thirty minute interval for the next two hours and at one hour interval for the remaining period up to eight hours. The results of the study were as follows: 1. The mean body temperature of the newborn infants on admission to nursery ranged from 98.7℉. to 99℉. irrespective of the body weight and the room temperature. 2. There was a significant difference in the body temperature changes of the newborn infants as a total between the general crib and the electric-heat crib from three to eight hours after birth. It was found that the body temperature of the newborn infants in the electric-heat crib was significantly higher than that of the newborn infants in the general crib. 3. In comparison with the body temperature changes of the newborn infants in the general crib, the newborn infants in the electric- heat crib exhibited significantly higher body temperatures in all three body weight groups; from four to eight hours after birth in the 2.5-2.9kg body weight group; from three to seven hours after birth in the 3.0-3.4kg body weight group; from two and half to six hours after birth in the group with body weight over 3.5kg. 4. Time required to reach 98℉. of body temperature was four hours in the 3.5-2.9kg body weight group, three hours in the 3.0-3.4kg. body weight group and two and half hours in the group with body weight over 3.5kg in the electric- heat crib. In the general crib, it took over eight hours in the 2.5-2.9kg body weight group and five hors in both the 3.0-3.4kg and over 3.5kg body weight group to reach 98℉ of body temperature. 5. The lowest mean body temperature of newborn infants in both general and electric- heat crib appeared in forty-five minute after birth and the temperature ranged from 96.4℉ to 96.5℉. 6. The mean body temperature of the newborn infants in the general crib was increased as the room temperature. 7. The body weight, the room temperature and the time elapsed after birth fore proved to be significant factors influencing the body temperature changes of newborn infants. From tile above results, the three hypotheses were positively accepted.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.5
• /
• pp.41-48
• /
• 2006

Crib wall is one of the segmental grid retaining walls using headers and stretchers to establish the framework of the wall. In this method, grids formed by the intersection of headers and stretchers are generally filled with the gravel to maintain the weight of the wall. Therefore, the construction can be carried out with higher speed and much economically when compared with the concrete retaining wall. Furthermore, it has high drain capacity, and environmentally friendly aspects also have been pointed out because the possibility of the planting at the front of the wall. However, in the crib wall method, the relative movement between the individual headers and stretchers was generally recognized, and stress redistribution in the gravel filling was also observed when subjected to the external loading and self-weight of filling. Therefore, it has been thought that the distribution of the earth pressure in the crib wall system differ from that of the concrete retaining wall. In this study, the surcharge tests using the scaled model crib wall was carried out to observe the distribution of the earth pressure in the segmental grid retaining wall. The earth pressure was measured in the six specified height of wall, and the distribution of the pressure was analyzed. Furthermore, the earth pressure by computation or by the test using the concrete retaining wall was also considered to make comparison.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.6 no.3
• /
• pp.201-209
• /
• 2002

Crib wall system is one of segmental crib type wall. Crib walls are constructed from separate members with no bonds between them other than frictional. The wall units are divide into two main types termed headers and stretchers. The headers run from the front to the back of the wall, perpendicular to the wall face. The cells are created by forming a grid by stacking individual wall components known as headers and stretchers. The body of wall consists of a system of open cell which are filled with a granular material. The design of crib retaining wall is usually based on conventional design methods derived from Rankine and Coulomb theory so that is able to resist the thrust of soil behind it, because it may be assumed that the wall acts as a rigid body. However, deformation characteristics of crib walls cannot be assumed as monolithic. They consist of individual members which have been stacked to creat a three dimensional grid. Therefore, the segmental grid allows relative movement between the individual member within the wall. The three dimensional flexible grid leads to stress distribution by interaction behavior between soil and crib wall. Therefore, in this study, in order to analysis the trends of deflection of crib wall system, new numerical models based on the results of Brandl's full scale test are introduced for design concept.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.7
• /
• pp.39-50
• /
• 2013

Crib wall is one of the segmental grid retaining walls using headers and stretchers to establish the framework of the wall. In this method, grids formed by the intersection of headers and stretchers are generally filled with the gravel to maintain the weight of the wall. Therefore, the construction can be carried out with higher speed and much economically when compared with the concrete retaining wall. Furthermore, it has high drain capacity, and environmentally friendly aspects also have been pointed out because the possibility of the planting at the front of the wall. However, in the wooden crib wall method, the relative movement between the individual headers and stretchers was generally recognized, and stress redistribution in the gravel filling was also observed when subjected to the external loading and self-weight of filling. In this study, it was analyzed fracture types and causes of wooden crib wall through detailed investigation and analysis of a large crib wall construction site. As a results, it occurred the damage in the members of 5.7% in a total of 2,315 locations and the damage of header occurred in the members of a header 80.2%. The 65.7% of the damaged header are concentrated in the lower part of crib wall. Therefore, it was analyzed the differences of fracture types and causes of wooden crib wall depending on the installation position and the kinds of members. It is considered basically the members of various forms of distortion and the grain affecting.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.10a
• /
• pp.449-456
• /
• 1999

The concrete wall is the most useful of retaining structure which can obtain the engineering stability, but has problems that is not friendly with nature environment in a fine view, such as poor rear drainage, and shrinkage crack by temperature difference, etc. Because of this problems, the research for a segmental crib retaining wall has been performed. A segmental crib retaining wall is quickly and easily erected because is possible to be erected as the individual members, and is not sensitive to differential settlement and earthquakes. Also, it shows effective drainage and has a friendly advantage with nature environment because of being able to be planted with vines and shrubs in retaining walls The design of crib retaining walls has traditionally been based on classical soil mechanics theories. These theories, originally derived by Rankine(1857) and Coulomb(1776), assume that the wall acts as a rigid body. This assumption results in failure being predicted by either monolithic overturning or base sliding mechanisms. However, the wall consists of individual members which have been created a three dimensional grid. This grid confines an fill mass which becomes part of the wall. The filled wall resists the earth pressure with the same mechanism of classical gravity walls. Because of the flexibility of the individual segment, it allows relative movement between the individual members within the wall. The three dimensional flexible grid leads to stress redistribution when the wall is subjected to external or fill loads. Due to the flexibility and the stress redistribution, the failure of segmental crib wall consists of not only overturing and base sliding but the local deformation and the failure between the segmental members. It has been researched in the field that due to this flexibility and load redistribution, serviceability failure of segmental crib walls is unlikely to be due to overturning or base sliding. Therefore, in this study, the relative displacement appearance of retaining wall due to variation of inclination is measured to examine this behavior characteristics. Also, the behavior characteristics of retaining walls by surcharge load, and location of acting point of retaining wall rear, and the displacement characteristics and deflections are estimated about the existence and nonexistence of Rear Stretcher performing an role in transmitting earth pressure of Header and Stretcher organizing retaining walls. This research focuses on the characteristics due to the behavior of retaining walls. This research focuses on the characteristics due to the behavior of retaining walls.

• Clinical and Experimental Pediatrics
• /
• v.52 no.10
• /
• pp.1127-1135
• /
• 2009

Purpose : To observe the abnormal white matter findings on the magnetic resonance imaging (MRI) scans of very-low- birth-weight (VLBW) infant brains at term-equivalent age and to determine the clinical risk factors for the development of periventricular leukomalacia (PVL). Methods : In all, MRI was performed in 98 VLBW infants and the white matter abnormalities were observed. Clinical risk factors for cystic and noncystic PVL were determined. Results : MRI scans of 74 infants (75.5%) showed diffuse excessive high signal intensity (DEHSI) in the periventricular white matter, 17 (17.3%) lateral ventricle dilation, 5 (5.1%) and 11 (11.2%) focal punctate lesions and cystic changes in the periventricular white matter, respectively, 9 (9.1%), germinal layer hemorrhage (GLH) or subependymal cysts 3 (3.1%) intraventricular hemorrhage (>grade 2) 2 (2.0%) posthemorrhagic hydrocephalus and 2 (2.0%) periventricular hemorrhagic infarct. Gestational age (GA), 1-minute Apgar score, Clinical Risk Index for Babies-II (CRIB-II) score, and inotrope use, and GA, CRIB-II score, postnatal steroid administration, inotrope use, and abnormal white blood cell (WBC) count at admission were related to cystic PVL and noncystic PVL development, respectively (P<0.05). However, in logistic regression analysis, CRIB-II (odds ratio, 1.63, 295% confidence interval, 1.15-2.30 P=0.006) for cystic PVL, and GA (odds ratio 0.90, 95% confidence interval, 0.82-0.99 P=0.036) for noncystic PVL were only significant independently. Conclusion : White matter abnormalities could be observed on MRI scans of the VLBW infant brains at term-equivalent age, and CRIB-II and GA were only independently significant for cystic and noncystic PVL development, respectively.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.11a
• /
• pp.76-79
• /
• 2008

In this work wood crib burning behaviors have been simulated by using the FDS(Fire Dynamic Simulator) program. Wood cribs are regularly stacked arrays of wood sticks, and available for the performance rating of fire-extinguishers. On the basis of an angle iron supporter 26 layers of wood sticks have been stacked up. Each layer consists of 5 or 6 wood sticks which are placed in parallel, with a constant distance, and in alternating rows. They are laid between the horizontally adjacent sticks at the before last layer. The wood crib is ignited instantaneously by an amount of burning gasoline below. A comprehensive simulation of such a practical sophisticated combustion is still too difficult to realize with any currently available computer, although the performance of modern processors is getting better everyday. We could carry it out here through parallel computing on the HPC(High Performance Computing) cluster as the feasible alternative. At last the validation has been executed by means of temperature distribution data measured by the thermal video camera.

• Clinical and Experimental Pediatrics
• /
• v.49 no.9
• /
• pp.952-958
• /
• 2006

Purpose : The survival rate of infants weighing less than 1,000 g at birth(extremely low birth weight infants, ELBWI) has increased due to recent advances in perinatal and neonatal intensive care. The purpose of this study was to evaluate the survival rates of ELBWI born at Seoul National University Hospital during the last six years. Methods : A total of 99 infants were divided into three groups(period I: 2000 to 2001, period II: 2002 to 2003, period III : 2004 to 2005) based on date of birth. We compared the survival rate of ELBWI over the three periods, using CRIB II score for adjustment for clinical severity. Results : Overall survival rate of ELBWI was 74.7 percent. The survival rate of ELBWI increased over the three periods(period I: 60.7 percent, period II : 73.3 percent, period III : 85.3 percent). The threshold of viability(defined as survival of at least 50 percent of infants) was 25 weeks of gestation and 600 g at birth. The birth weight-specific survival rates increased considerably over the three periods for infants <750 g at birth(period I: 10 percent, period II: 46.2 percent, period III : 70.6 percent). The survival rates of ELBWI over the three periods increased much remarkably after adjustment for clinical severity by CRIB II score. Conclusion : In our institution, survival rates of ELBWI during the last six years continued to improve, particularly for infants weighing <750 g at birth. This increase in survival rates was not associated with the clinical severity of ELBWI.

• Clinical and Experimental Pediatrics
• /
• v.51 no.5
• /
• pp.474-480
• /
• 2008

Purpose : Stress hyperglycemia is common in critically ill adult patients. It is known as a predictor of increased mortality, and intensive insulin therapy has been shown to improve the prognosis in such patients. We have investigated the relationship between early stress hyperglycemia and clinical outcomes in preterm infants. Methods : In this study, 141 preterm infants with a gestational age of less than 30 weeks were enrolled. The hyperglycemic group was defined as that having maximum glucose of more than 150 mg/dL (n=61) during the first 48 h of life, and the non-hyperglycemic group was defined as that having maximum glucose of less than 150 mg/dL (n=80). Perinatal history, severity of illness using the Clinical Risk Index for Babies (CRIB) score, clinical outcomes, and mortality of the two groups were compared. Results : There was no significant difference in the gestational age between the two groups, but the birth weight (P<0.001) was significantly lower, and the CRIB score (P<0.001) was significantly higher in the hyperglycemic group. Disseminated intravascular coagulation (P<0.001) and clinically suspected sepsis (P=0.046) were more common in the hyperglycemic group. Mortality was markedly higher in the hyperglycemic group (11.3% vs. 41.0%, P<0.001). On performing a stepwise multiple logistic regression analysis, hyperglycemia (OR 3.787; 95% CI 1.324 to 10.829), the CRIB score (OR 1.252; 95% CI 1.047 to 1.496) and birth weight (OR 0.997; 95% CI 0.994 to 1.000) was independently associated with higher mortality. Conclusion : Stress hyperglycemia within the first 48 h of life is independently related to increased morbidity and mortality in preterm infants.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.2
• /
• pp.236-243
• /
• 2005

Anterior openbite is defined as the lack of contacts between the functional occluding teeth on vertical line at centric occlusion and classified into functional and skeletal anterior openbite based on its causes and characteristics. In mixed dentition, habit control and the elimination of abnormal perioral muscle function and moving the vertical direction development to the sagittal direction of the mandible by the functional appliance is a goal of treatment. This study presents the effective interception of oral habit by the tongue crib and functional-fixed treatment and treatment response of openbite related to tongue thrust habit.